GUG TY Mechanical syllabus

GUG · Third Year B.Tech. Mechanical Engineering · NEP 2020

Kinematics of Machines

STPCCMEC504 · Semester V · 4 credits · IE 10 + mid-semester 10 + ESE 80

  1. Unit 1: Fundamentals of Mechanisms

    9 hours

    Kinematic concepts, mechanisms and machines, classification of mechanisms and pairs; degrees of freedom and mobility by Kutzbach's criterion; Grashof's law; inversions of the four-bar, single and double slider-crank chains.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Links, pairs and kinematic chains
    • Degrees of freedom and Grübler's criterion
    • Inversions of the four-bar chain
    • Inversions of slider-crank and double slider-crank chains
  2. Unit 2: Kinematic Analysis of Mechanisms

    10 hours

    Displacement analysis of simple mechanisms; velocity by relative velocity, instantaneous centres and Kennedy's theorem; velocity polygons; acceleration analysis with tangential, normal and Coriolis components.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Analytical analysis of the slider-crank mechanism
    • Velocity analysis by relative velocity
    • Instantaneous centres and Kennedy's theorem
    • Graphical acceleration analysis
    • Acceleration analysis and the Coriolis component
  3. Unit 3: Cams and Followers

    9 hours

    Types of cams and followers and their terminology; displacement diagrams for uniform velocity, parabolic, SHM and cycloidal motions; follower velocity and acceleration; graphical cam profiles; cams with specified contours, circular and tangent cams; pressure angle and undercutting.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Types of cams and followers
    • Follower motions: SHM, uniform acceleration and cycloidal
    • Displacement, velocity and acceleration diagrams of followers
    • Drawing cam profiles
    • Circular-arc and tangent cams
    • Pressure angle, undercutting and jump
  4. Unit 4: Gears and Gear Trains

    9 hours

    Involute and cycloidal tooth profiles, gear terminology, the law of gearing and conjugate action; spur gear kinematics, contact ratio and interference; helical, bevel, worm and rack-and-pinion gears (kinematics only); simple, compound and epicyclic gear trains.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Gear terminology and the law of gearing
    • Path and arc of contact and contact ratio
    • Interference and minimum number of teeth
    • Helical, bevel and worm gears
    • Simple and compound gear trains
    • Epicyclic gear trains and holding torque
  5. Unit 5: Friction and Power Transmission Elements

    8 hours

    Laws of dry friction, sliding and rolling friction and friction in machine elements; open and crossed belt and rope drives, velocity ratio, slip and creep; chain drives and their classification.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.