Mechanical Engineering (University) is coming soon
We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.
Mechanical Engineering (University)
Engineering Mechanics
Force systems and equilibrium, friction, trusses and centroids, moment of inertia, kinematics and kinetics of particles and rigid bodies.
Your progress in this subject0 of 10 · 0%
- 1Moments and couplesMoments and couples: definitions, Varignon’s theorem, 2D/3D moment calculation (point and axis), properties of a couple, and force–couple equivalence with worked numerical examples.
- 2Equilibrium and free-body diagramsEquilibrium conditions for particles and rigid bodies and how to draw and use free-body diagrams to solve 2D statics problems.
- 3Support reactions of beamsSupport reactions of beams: types of supports, free‑body diagram, equivalent loads for UDL/UVL/couples, and solving reactions using ΣFx=0, ΣFy=0, ΣM=0 with worked examples.
- 4Centroid and centre of gravityCentroid and centre of gravity: definitions, assumptions, formulas for lines/areas/volumes, standard centroids, composite bodies with holes, distributed loads’ line of action, Pappus theorems, and exam-style worked examples.
- 5Analysis of trussesAnalysis of trusses: idealizations, determinacy and stability, zero‑force members, method of joints, method of sections, sign conventions, and solved numerical examples.
- 6Moment of inertiaMoment of inertia (mass and area), parallel and perpendicular axis theorems, radius of gyration, standard formulas for common shapes, and composite/shift calculations with examples.
- 7Kinematics of particles: rectilinear motionKinematics of particles: rectilinear motion—definitions, laws, v–a–x–t relations, graphs, constant/variable acceleration, relative motion, and exam-style examples.
- 8Kinetics: Newton's second lawNewton’s second law in kinetics: relating net force to mass and acceleration, component form (rectilinear and normal–tangential), D’Alembert’s principle, inertial vs non-inertial frames, and solving standard particle dynamics problems.
- 9Work–energy principleWork–energy principle: relate work of forces to change in kinetic energy, include potential energy, conservative/nonconservative forces, springs, power, and typical exam derivations and numericals.
- 10Friction and belt frictionBasics of dry friction and belt (capstan) friction, including laws, angle of friction, angle of repose, cone of friction, capstan equation for flat and V-belts, and related calculations.
Coming next in Engineering Mechanics
- Equilibrium of spatial force systems· notes coming
- Mass moment of inertia of solids· notes coming
- Plane motion of rigid bodies· notes coming
- D'Alembert's principle and connected bodies· notes coming
- Ladder and wedge friction· notes coming
- Simple machines: the screw jack· notes coming