Dynamic analysis of linkages

Dynamic analysis of linkages: inertia forces/couples, D’Alembert’s principle, shaking forces/moments, and input torque/effort for mechanisms like four-bar and slider–crank.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Dynamic analysis tells you the forces, torques, and reactions a mechanism produces when it accelerates. This is how we size motors, pins, bearings, and frames, reduce vibration (“shaking”), and predict durability. It’s indispensable in engine slider–cranks, robot arms, presses, and packaging machinery.

Key ideas

  • D’Alembert’s principle

    • Exact statement: “The algebraic sum of external forces and the inertial forces on a body is zero in dynamic equilibrium; equivalently, ΣF − m·a_G = 0 and ΣM_G − I_G·α = 0.” For a rigid body in plane motion: ΣF = m·a_G and ΣM_G = I_G·α. In D’Alembert’s method, you add the fictitious inertia force F* = −m·a_G at G and inertia couple C* = −I_G·α, reducing dynamics to a statics-like problem.
    • Assumptions: rigid links; motion in a plane; pin joints are frictionless and massless; gravity included if significant; kinematics (positions, velocities, accelerations) known from previous analyses (see Velocity and Acceleration Analysis).
    • Sign convention: choose axes (often x along line of stroke) and positive rotations (counterclockwise positive). Inertia force acts opposite the actual acceleration vector; inertia couple acts opposite the angular acceleration.
  • Newton–Euler for each link (planar rigid body)

    • Unknowns: joint reactions, driving torque/force, possibly friction if modeled.
    • Equations at an instant:
      • ΣF_x = m·a_Gx
      • ΣF_y = m·a_Gy
      • ΣM_G = I_G·α (moment taken about the mass center G)
    • For links about fixed pivots (e.g., a crank on a fixed shaft): velocity is tangential; acceleration of G has normal (ω²·r toward pivot) and tangential (α·r) components. If you sum moments about the fixed pivot O, you may use I_O in ΣM_O = I_O·α; or sum about G with I_G and include r_GO × (m·a_G) via the parallel-axis/transport term.
  • Static equivalence of inertia

    • The pair {F* at G, C* at G} is statically equivalent to the actual dynamic effects of the link at that instant. You may sum moments about any point P (external moments): ΣM_P(ext) = I_G·α + r_GP × (m·a_G), taking care with vector directions.
  • Slider–crank specialization (engine mechanism)

    • Geometry: crank radius r, connecting rod length L, crank angle θ from inner dead centre (IDC, line of stroke), connecting rod angle φ from line of stroke. Exact kinematic relation: sin φ = (r/L)·sin θ.
    • Piston (slider) acceleration along line of stroke for constant ω: a_p toward IDC is approximately a_p = r·ω² (cos θ + (r/L)·cos 2θ). The first term is the “primary” component (∝ cos θ); the second is “secondary” (∝ cos 2θ). The approximation is excellent when r/L ≤ 0.3. State clearly your positive direction (common: positive toward IDC).
    • Force transmission and crank effort: Let F_line be the net force along the line of stroke on the piston (e.g., gas force minus inertia force). Force in the connecting rod is N = F_line / cos φ (compressive if pushing). The torque on the crank is T = r · N · sin(φ − θ). The sign indicates direction; magnitude gives the required driving (or resisting) torque to maintain the stated motion. The side thrust on the slider/guide (if asked) is R_side = N · sin φ.
  • Shaking force and shaking moment

    • Definitions:
      • Shaking force: the resultant force transmitted to the ground/frame due to inertia of moving links (equal to the negative vector sum of inertia forces on all moving links, plus any unbalanced external forces on the links that are reacted at ground).
      • Shaking moment about a ground reference point O: the net moment transmitted to the frame due to inertia (negative sum of moments of inertia forces and inertia couples of all links about O, plus moments of any external loads reacted at ground).
    • Why it matters: these drive vibration and noise, and determine foundation loads.
  • Power/energy viewpoint for mechanisms with some fixed-axis links

    • Instantaneous power balance: Σ(T_i·ω_i) + Σ(F_lin,i·v_i) = d/dt(K.E.) + power lost to resistances. Often used as: input torque × input speed = output torque × output speed + rate of change of total kinetic energy (summing both rotational and translational contributions of all links). This is handy when only a few links rotate about fixed shafts and others are neglected or grouped.
  • Mass properties and idealizations

    • For a slender uniform rod of length L and mass m: I_G = (1/12)·m·L² about its centroidal axis normal to the plane; the mass center is at mid-length.
    • Dynamically equivalent two-mass systems may be used to approximate a distributed rod by point masses to simplify calculations. If you put the two masses exactly at the rod ends and also enforce the correct centroid, you overpredict I_G; many textbooks then add a “correction couple” to match the true inertia couple, or they assign a fraction of the rod mass to reciprocating and rotating parts (a common engineering approximation is about 1/3 of the rod mass treated as reciprocating and 2/3 as rotating, but this depends on geometry and should be justified if used).
  • Why real devices differ from the ideal

    • Joint friction, clearances, link flexibility, and 3D effects produce extra forces and phase shifts. Gas force in engines varies with crank angle; using a single F_gas value is simplistic. At high speeds, deformation and damping can alter effective mass properties (added flexibility) and excite modes (see Vibrations topics).

Formulas

  • D’Alembert force equilibrium (planar body): ΣF = m·a_G where ΣF is the vector sum of external forces on the link (N), m is link mass (kg), a_G is acceleration of the mass center (m/s²). Applies to rigid link in plane motion.

  • D’Alembert moment equilibrium about G (planar body): ΣM_G = I_G·α where ΣM_G is sum of external moments about G (N·m), I_G is planar mass moment of inertia about G (kg·m²), α is angular acceleration (rad/s²).

  • Inertia force and couple (to use as fictitious loads in “dynamic equilibrium” drawings): F* = −m·a_G, C* = −I_G·α F* at G (N), C* at G (N·m). Use opposite to actual accelerations.

  • Parallel-axis for planar rotation about a fixed ground pivot O: I_O = I_G + m·r_OG² I_O is mass moment about O (kg·m²), r_OG is distance from O to G (m). Use when summing moments about a fixed pivot.

  • Slender uniform rod (in-plane, about centroid): I_G = (1/12)·m·L² m (kg), L (m). Use for connecting rods/couplers if uniform.

  • Slider–crank: exact geometric relation between crank and rod angles: sin φ = (r/L)·sin θ r (m), L (m), θ and φ in radians (or degrees consistently). Applies to ideal pins and straight rod.

  • Slider–crank piston acceleration for constant crank speed (positive toward IDC): a_p = r·ω² (cos θ + (r/L)·cos 2θ) a_p (m/s²), r (m), ω (rad/s), θ (rad), L (m). Approximate series valid when r/L is small; sign depends on chosen positive direction.

  • Net line-of-stroke force on piston (using D’Alembert): F_line = F_gas − m_p·a_p F_line (N, positive toward IDC), F_gas is pressure-resultant on piston (N) toward IDC, m_p is reciprocating mass (kg). Use when friction and side thrust are neglected.

  • Force in connecting rod (axial): N = F_line / cos φ N (N), φ as above. Applies when only axial force in the rod is considered.

  • Crank torque due to connecting-rod force at the crank pin: T = r · N · sin(φ − θ) T (N·m), r (m), N (N), θ and φ consistent units. Sign gives direction; magnitude gives required driving/resisting torque.

  • Shaking force (resultant on ground): Inertia-only part: F_shake = − Σ F* (over all moving links). Including external loads reacted at ground: F_shake = − Σ ( F* + F_ext,reacted ). F_shake (N). Negative sign indicates ground reaction equals negative of the sum of link-applied forces.

  • Shaking moment about ground point O: Inertia-only part: M_shake,O = − Σ ( C* + r_OG × F* ). Including external loads reacted at ground: M_shake,O = − Σ ( C* + r_OG × F* + M_ext,reacted + r_OG × F_ext,reacted ). M_shake,O (N·m), r_OG (m). Sum over all links.

  • Instantaneous power balance (common simplified use when some links rotate about fixed pivots and others neglected): T_in·ω_in = T_out·ω_out + d/dt (K.E._total) where K.E._total includes Σ(½ I_i·ω_i²) for fixed-axis rotating links and Σ(½ m_j·v_Gj²) for translating/complex-motion links. Units: W on both sides. Use at an instant.

  • Rate of change of rotational kinetic energy for a fixed-axis link i: d/dt(½ I_i·ω_i²) = I_i·ω_i·α_i I_i (kg·m²), ω_i (rad/s), α_i (rad/s²). Use in the power balance.

Worked examples

Given: r = 0.05 m; L = 0.20 m; crank speed n = 600 rpm (constant); θ = 60°; piston mass m_p = 1.5 kg; net gas force on piston toward IDC F_gas = 2000 N. Assumptions: friction and side thrust neglected; connecting-rod inertia neglected; positive toward IDC. Steps:

  1. Convert speed: ω = 2π n / 60 = 2π·600/60 = 62.8319 rad/s.
  2. Piston acceleration toward IDC: Formula: a_p = r·ω² (cos θ + (r/L)·cos 2θ) Numbers: r·ω² = 0.05·(62.8319)² = 0.05·3947.84 = 197.392 m/s²; cos θ = 0.5; r/L = 0.25; cos 2θ = cos 120° = −0.5. So a_p = 197.392·(0.5 + 0.25·(−0.5)) = 197.392·(0.5 − 0.125) = 197.392·0.375 = 74.022 m/s².
  3. Inertia force (vector on the piston free-body): F* = − m_p·a_p along the line of stroke. Its magnitude is |F*| = m_p·a_p = 1.5·74.022 = 111.033 N (acts opposite to the acceleration, i.e., away from IDC here).
  4. Net line-of-stroke force to rod: F_line = F_gas − |F*| = 2000 − 111.033 = 1888.967 N (toward IDC).
  5. Geometry: sin φ = (r/L)·sin θ = 0.25·sin 60° = 0.25·0.866025 = 0.216506 ⇒ φ ≈ 12.50°. Then cos φ ≈ 0.976296.
  6. Rod axial force: N = F_line / cos φ = 1888.967 / 0.976296 = 1934.937 N (compressive).
  7. Crank torque magnitude: T = r·N·|sin(φ − θ)|. Here φ − θ = 12.50° − 60° = −47.50°, so |sin(φ − θ)| = 0.737277. T = 0.05·1934.937·0.737277 = 71.287 N·m. Result: Required driving torque to hold 600 rpm at θ = 60° is about 71.3 N·m (direction opposite the resisting torque sign from step 7).
  • Example 2 (GATE-style): Input torque in a four-bar using instantaneous power balance (coupler neglected) Mechanism: Ground–crank–coupler–rocker four-bar. At a certain instant: input crank (link 2) rotates about its fixed pivot O2 with ω2 = 30 rad/s and α2 = 120 rad/s²; its mass moment about O2 is I2 = 0.08 kg·m². Output rocker (link 4) rotates about its fixed pivot O4 with ω4 = 10 rad/s and α4 = −40 rad/s²; its mass moment about O4 is I4 = 0.12 kg·m². External resisting torque on the rocker is T_load = 50 N·m (opposes ω4). Coupler inertia is negligible for this estimate; joint friction neglected. Required: Instantaneous input torque T_in on the crank. Assumptions: Only fixed-axis rotation energy terms included (crank and rocker). Coupler KE and its rate-of-change neglected (common first-order approximation for quick estimates). Steps:
    1. Instantaneous power balance: T_in·ω2 = T_load·ω4 + d/dt(K.E._crank + K.E._rocker).
    2. Rate of change of rotational KE: d/dt(½ I·ω²) = I·ω·α. Therefore: T_in·ω2 = T_load·ω4 + I2·ω2·α2 + I4·ω4·α4.
    3. Substitute values (W on right-hand side):
      • T_load·ω4 = 50 N·m · 10 rad/s = 500 W
      • I2·ω2·α2 = 0.08 kg·m² · 30 rad/s · 120 rad/s² = 288 W
      • I4·ω4·α4 = 0.12 kg·m² · 10 rad/s · (−40 rad/s²) = −48 W Sum = 500 + 288 − 48 = 740 W.
    4. Solve for T_in: T_in = 740 W / ω2 = 740 / 30 = 24.666… N·m. Result: Instantaneous input torque is 24.67 N·m. Note: A full dynamic analysis would include coupler translational and rotational KE rate, and any gravity terms if significant.

Common mistakes

  • Forgetting the inertia couple I_G·α on links with angular acceleration (especially the connecting rod), or applying m·a at a joint instead of at the mass center.
  • Using the slider–crank acceleration formula without stating direction (toward IDC vs away), or using degrees in a calculator set to radians (or vice versa) for cos 2θ.
  • Applying the small r/L approximation when r/L is not small (e.g., > 0.3), causing noticeable error in the secondary term.
  • Computing crank torque from piston force using T = F·r·sin θ directly, ignoring the connecting-rod obliquity φ; correct relation uses N and sin(φ − θ) or an equivalent exact expression.
  • Summing “shaking forces” by adding absolute values; they are vectors and must be summed with direction.

For GATE ME

  • Instantaneous force/torque in slider–crank: given θ, r, L, ω (constant), piston mass and/or gas force profile (often a single value), compute piston acceleration, inertia force, rod force, crank effort/torque at that instant. Practise the full chain: a_p → F_inertia → N → T.
  • Dynamic force analysis of a link: write ΣF = m·a_G and ΣM_G = I_G·α; solve joint reactions. Expect simple geometries and one link at a time.
  • Shaking force and moment: identify and compute resultant on the frame at a given instant. Practise forming F* and C* for each link and summing (and include any external loads reacted at ground, if given).
  • Quick input torque via power balance: use T_in·ω_in = T_out·ω_out + d/dt(K.E.) when enough kinematic data (ω, α, I) are given and coupler inertia is negligible or specified.
  • Order-of-magnitude checks: verify units (N, N·m, W), ensure torque magnitudes are consistent with forces and radii.

Quick check

  1. State D’Alembert’s principle for a planar rigid body and explain the inertia force and inertia couple you would add for dynamic equilibrium.
  2. In a slider–crank with r/L = 0.2 and constant ω, which harmonics appear in the piston acceleration, and what are their amplitudes relative to r·ω²?
  3. At a given instant in a slider–crank, F_line = 5 kN toward IDC, θ = 40°, φ = 9°. For r = 60 mm, what is the crank torque magnitude? (Neglect rod inertia.)

Answers: (1) ΣF = m·a_G and ΣM_G = I_G·α; add F* = −m·a_G at G and C* = −I_G·α at G. (2) Primary cos θ with relative amplitude 1, and secondary cos 2θ with relative amplitude r/L (= 0.2 here). (3) N = 5000 / cos 9° ≈ 5063 N; |sin(φ − θ)| = |sin(9° − 40°)| = |sin(−31°)| ≈ 0.515; T = 0.06·5063·0.515 ≈ 156 N·m.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?