Forces on submerged surfaces

Hydrostatic pressure distributions on plane and curved submerged surfaces, resultant force magnitude and center of pressure, and components on curved surfaces for gate and dam design.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Hydrostatic forces on submerged plates, gates, dams, tanks, and ship hulls can be large and act at depths different from the centroid, creating significant moments. Correctly computing the resultant force and its line of action (center of pressure) is essential for safe design of gates, sluices, lock doors, underwater panels, and retaining walls.

Key ideas

  • Hydrostatic pressure: In a fluid at rest of uniform density ρ under gravity g with a flat free surface, the gauge pressure at a vertical depth y below the free surface is p = ρ g y. Pressure acts normal to any surface.

    • Assumptions: fluid at rest; constant ρ; uniform g; neglect surface tension; gauge pressure referenced to the atmosphere.
    • Sign convention used here: y is measured vertically downward from the free surface; compressive pressure is positive.
  • Resultant force on a submerged plane surface: Consider any plane area A (arbitrary shape), fully submerged at an inclination θ to the free surface; use the vertical depth y of each element.

    • Statement: The resultant hydrostatic force on a plane surface is FR = ρ g A ȳ, where ȳ is the vertical depth of the area’s centroid below the free surface. The resultant acts normal to the plane.
    • Why: dF = p dA = ρ g y dA; integrate over A: FR = ρ g ∫A y dA = ρ g A ȳ.
    • Independence of shape: FR depends only on A and ȳ (not shape) for a given fluid.
  • Center of pressure (CP) on a plane surface: The line of action is below the centroid because pressure increases with depth.

    • Statement: The vertical depth of the center of pressure is y_cp = ȳ + IG / (A ȳ), where IG is the second moment of area of the surface about a horizontal axis through its centroid and parallel to the free surface.
    • Derivation outline: Take moments about the free surface: FR y_cp = ρ g ∫A y^2 dA. By the parallel axis theorem ∫A y^2 dA = IG + A ȳ^2. Substituting FR gives y_cp = ȳ + IG / (A ȳ).
    • Properties and limiting cases:
      • y_cp > ȳ always (IG > 0), so CP lies below the centroid.
      • For deep submergence, ȳ ≫ √(IG/A), y_cp ≈ ȳ.
      • For a vertical rectangle of height h with its top at the free surface: ȳ = h/2 and y_cp = 2h/3 below the free surface.
    • Along-the-plane location: If s is distance measured along the plane from the free surface down the plate, then s_cp = y_cp / sinθ.
  • Inclined plane surfaces: The same formulas with y as the vertical depth apply; the resultant remains normal to the surface.

  • Composite plane areas: For surfaces with holes or composite shapes, compute A, ȳ, and IG via area addition/subtraction and the parallel axis theorem; then use FR = ρ g A ȳ and y_cp = ȳ + IG/(A ȳ).

  • Surfaces with different fluids on each side: Use the net pressure distribution equal to the difference of pressures, then repeat the same process. Net FR is the vector sum of resultants due to each side (often a simple difference when directions align).

  • Forces on curved submerged surfaces: The pressure is normal everywhere; the net resultant is easier via components.

    • Standard result (horizontal component): The horizontal component H equals the hydrostatic force on the vertical projection of the surface, acts horizontally through the center of pressure of that projection, and points from the fluid toward the surface (into the solid boundary).
      • H = ρ g Ap ȳp, where Ap is the area of the vertical projection and ȳp is its centroid depth.
    • Standard result (vertical component): The vertical component V equals the weight of the imaginary column of fluid directly above the curved surface up to the free surface (or up to the actual fluid interface if enclosed), acts vertically upward through the centroid of that imaginary fluid volume.
      • V = ρ g Vfluid (upward when the fluid is above the curved surface and open to atmosphere at the free surface).
    • Resultant and direction: R = √(H² + V²); inclination α to the horizontal given by tanα = V/H. The line of action passes through the intersection of the lines of action of H and V.
    • Connection to buoyancy: If the curved surface is the closed wetted surface of a submerged body, the net vertical hydrostatic force equals the buoyant force (weight of displaced fluid). Full treatment is in Buoyancy and Stability.
  • Moments and gate design: For plane gates hinged at an edge, compute FR and y_cp to find the moment about the hinge. Add or subtract other forces (weight of gate, external loads) and enforce moment equilibrium to find required counterweight or actuator force.

  • Why real devices differ from ideal:

    • Free-surface fluctuations (waves, sloshing), nonuniform temperature/density, trapped air pockets, and transient accelerations violate hydrostatic assumptions.
    • Shear on the surface is neglected in hydrostatics; in real flows, viscous drag may act on moving gates (see External Flow and Boundary Layer Theory).
    • Uncertainty in actual ρ (salinity, temperature) and g (slight regional variation) introduces small but nonzero errors.
  • Useful second moments of area (about centroidal horizontal axis parallel to the free surface):

    • Rectangle (width b, height h): IG = b h³ / 12.
    • Circle (diameter d): IG = π d⁴ / 64 (about any centroidal diameter).

Formulas

p = ρ g y

  • p: gauge pressure (Pa), ρ: density (kg/m³), g: gravitational acceleration (m/s²), y: vertical depth below free surface (m). Hydrostatic fluid at rest, uniform ρ and g.

FR = ρ g A ȳ

  • FR: resultant hydrostatic force on a plane surface (N), A: area (m²), ȳ: vertical depth of centroid (m). Plane surface, uniform fluid.

y_cp = ȳ + IG / (A ȳ)

  • y_cp: depth of center of pressure below the free surface (m), IG: second moment of area about centroidal horizontal axis parallel to free surface (m⁴). Plane surface, uniform fluid.

H = ρ g Ap ȳp

  • H: horizontal component of force on a curved surface (N), Ap: area of vertical projection (m²), ȳp: depth of its centroid (m). Fluid at rest.

V = ρ g Vfluid

  • V: vertical component of force on a curved surface (N), Vfluid: volume of imaginary fluid directly above the surface up to the free surface (m³). Acts vertically upward; fluid above surface, open to atmosphere.

R = √(H² + V²)

  • R: magnitude of resultant hydrostatic force on a curved surface (N). H, V as above. Direction angle α from horizontal: tanα = V / H.

IG(rectangle) = b h³ / 12

  • For rectangle width b (m), height h (m). IG in m⁴ about centroidal horizontal axis.

IG(circle) = π d⁴ / 64

  • For circle diameter d (m). IG in m⁴ about any centroidal diameter.

y_cp(rectangular vertical plate, top at free surface) = 2 h / 3

  • h: plate height (m). Depth below free surface (m).

Worked examples

Example 1 (direct): Force and center of pressure on a vertical rectangular gate

  • Given: Water (ρ = 1000 kg/m³), g = 9.81 m/s². Vertical rectangular gate of width b = 2.5 m and height h = 3.0 m, with its top edge at the free surface. Find FR and y_cp below the free surface.

Steps:

  1. Compute area and centroid depth.
    • A = b h = 2.5 m × 3.0 m = 7.5 m²
    • ȳ = h / 2 = 1.5 m
  2. Resultant force on a plane surface.
    • Formula: FR = ρ g A ȳ
    • Numbers: FR = (1000 kg/m³)(9.81 m/s²)(7.5 m²)(1.5 m)
    • Units: (kg·m/s²)/m³ × m² × m = N
    • Compute: ρ g = 9810 N/m³; A ȳ = 7.5 × 1.5 = 11.25 m³
    • FR = 9810 × 11.25 = 110,362.5 N = 110.36 kN
  3. Center of pressure depth.
    • Formula: y_cp = ȳ + IG / (A ȳ), with IG = b h³ / 12
    • Compute IG: IG = (2.5 m)(3.0 m)³ / 12 = (2.5)(27) / 12 = 5.625 m⁴
    • Denominator A ȳ = 11.25 m³
    • IG / (A ȳ) = 5.625 / 11.25 = 0.5 m
    • y_cp = 1.5 m + 0.5 m = 2.0 m

Answer: FR = 110.36 kN acting normal to the gate; center of pressure is at a depth of 2.00 m below the free surface (i.e., at 1.00 m above the bottom edge).

Example 2 (GATE-level): Force components and resultant on a quarter-cylindrical curved surface

  • Geometry: A smooth quarter-cylindrical surface of radius R = 2.0 m forms part of the side of a tank. The top edge of the curved surface meets the free surface at a right-angle corner with a vertical wall; the curved surface extends 2.0 m downward from the free surface (a quarter circle). The width into the page is b = 1.2 m. Water fills above the surface; atmospheric pressure at free surface. Find the horizontal component H, vertical component V, the resultant R and its direction, and the intersection point of H and V (the point through which R passes), measured from the corner at the free surface along the wall (horizontal x) and downward (vertical y).
  • Data: ρ = 1000 kg/m³, g = 9.81 m/s².
  • Assumptions: Hydrostatic; negligible shear; constant ρ and g; free surface flat.

Steps:

  1. Horizontal component via vertical projection.

    • Vertical projection is a rectangle of height h = R = 2.0 m and width b = 1.2 m. Its area Ap = b h = 1.2 × 2.0 = 2.4 m²; centroid depth ȳp = h/2 = 1.0 m
    • Formula: H = ρ g Ap ȳp
    • Numbers: H = 9810 N/m³ × 2.4 m² × 1.0 m = 23,544 N = 23.544 kN (acts horizontally)
    • Location (line of action): Depth of CP of the projection, y_cp,p = 2h/3 = 2(2.0)/3 = 1.333 m below free surface; passes through the mid-width plane.
  2. Vertical component via imaginary fluid weight.

    • Imaginary fluid volume above the curved surface is a quarter cylinder: Vfluid = (π R² / 4) b = (π × 2.0² / 4) × 1.2 = (π × 4 / 4) × 1.2 = π × 1.2 = 3.7699 m³
    • Formula: V = ρ g Vfluid (upward)
    • Numbers: V = 9810 N/m³ × 3.7699 m³ ≈ 36,982.8 N = 36.983 kN (upward)
    • Location (line of action): Through the centroid of the quarter-cylinder volume. The centroid of a quadrant (in the plane) is at distances x = y = 4R / (3π) from the right-angle corner.
      • xV = yV = 4R/(3π) = 8/(3π) m = 0.8488 m from the corner; the line of action is vertical through x = 0.8488 m and mid-width.
  3. Resultant magnitude and direction.

    • Formula: R = √(H² + V²), tanα = V/H
    • Numbers: R = √[(23.544 kN)² + (36.983 kN)²] ≈ √(554.3 + 1367.0) kN ≈ √(1921.3) kN ≈ 43.85 kN
    • Direction: tanα = 36.983 / 23.544 = 1.571 → α �� 57.7° above the horizontal (toward the solid boundary)
  4. Point through which the resultant passes.

    • It passes through the intersection of the lines of action of H and V:
      • Horizontal line (H): y = 1.333 m below free surface.
      • Vertical line (V): x = 0.8488 m from the wall.
    • Intersection coordinates (from the corner at the free surface): (x, y) = (0.8488 m, 1.333 m).

Answer: H = 23.544 kN at 1.333 m depth; V = 36.983 kN upward through x = 0.8488 m; resultant R ≈ 43.85 kN inclined at ≈ 57.7° above horizontal, passing through (0.8488 m, 1.333 m) in the mid-width plane.

Common mistakes

  • Using the along-the-plate distance instead of vertical depth in FR = ρ g A ȳ and in y_cp.
  • Taking IG about the wrong axis (must be the centroidal horizontal axis parallel to the free surface).
  • Forgetting that CP is below the centroid; reporting y_cp = ȳ by mistake.
  • For curved surfaces, incorrectly using the curved area in H instead of using the vertical projection area; or forgetting that V is the weight of the imaginary liquid volume, not the area times pressure.
  • Mixing absolute and gauge pressures. For one-sided loading into atmosphere, p0 cancels; for two-sided loading, the net is the difference of the two pressure fields.
  • Ignoring the line of action in gate problems; you must take moments about the hinge, not just use FR.
  • Using ρ = 1000 kg/m³ without checking the working fluid (e.g., oils have different densities) or the temperature dependence when accuracy matters.

For GATE ME

  • Compute FR and y_cp for standard shapes (rectangles, circles, triangles) in vertical or inclined positions. Be ready to use IG values and the parallel axis theorem.
  • Quick results to recall: For a vertical rectangle with top at the free surface, FR = ρ g b h²/2 and y_cp = 2h/3. For deep submergence, y_cp ≈ ȳ.
  • Curved-surface components: Calculate H from the vertical projection; V from the weight of the imaginary liquid above (often quarter/semicylinders); then combine to get R and its direction. Locate the intersection of H and V.
  • Gate equilibrium: Take moments about hinges to find required counterweights or actuator forces; include gate self-weight if given; consider different fluids on each side via net pressure.
  • Composite areas and holes: Find A, ȳ, IG by addition/subtraction; then apply standard formulas.
  • Practise drawing pressure diagrams and computing resultants and their application points; this speeds up multi-step problems within time limits.

Quick check

  1. A vertical rectangular plate 1.0 m wide and 2.0 m high has its top edge 0.5 m below the free surface. For water, what is the depth of the center of pressure below the free surface?
  2. For a submerged curved surface, what equals the horizontal component of the hydrostatic force, and through which point does it act?
  3. On a vertical dam face of depth h from the free surface to the bottom, at what depth below the free surface does the resultant hydrostatic force act?

Answers: 1) ȳ = 0.5 + 2/2 = 1.5 m; IG = b h³/12 = (1)(8)/12 = 0.6667 m⁴; A = 1×2 = 2 m²; y_cp = 1.5 + 0.6667/(2×1.5) = 1.5 + 0.2222 = 1.722 m. 2) The horizontal component equals the force on the vertical projection (H = ρ g Ap ȳp) and acts through the center of pressure of that projection. 3) At 2h/3 below the free surface (i.e., h/3 above the bottom).

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?