Buoyancy and stability of floating bodies
Buoyancy and stability of floating bodies: Archimedes’ principle, centers G/B/M, metacentric height GM, BM = I/∇, stability criteria (floating and submerged), and small-angle roll period.
Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.
Why it matters
Ships, pontoons, buoys, offshore platforms and even beverage cans in a tank all rely on buoyancy and static stability to float safely. Engineers use these ideas to size drafts, ensure adequate stability margins (GM), and predict motions like roll period for comfort and safety.
Key ideas
- Buoyancy (Archimedes’ principle): A body immersed in a fluid experiences an upward buoyant force equal to the weight of the fluid it displaces. Statement: “A fluid exerts an upward force on a submerged or floating body equal to the weight of the displaced fluid, acting through the centroid of the displaced volume.” Assumptions: hydrostatic (fluid at rest), incompressible fluid, uniform gravity, no capillary effects.
- Center of buoyancy (B): The point through which the buoyant force acts; it is the centroid of the displaced fluid volume. For a floating body, as it heels, B shifts because the shape of the displaced volume changes.
- Center of gravity (G): The point where the resultant weight of the body acts. It depends only on the mass distribution of the body (and any cargo inside), not on the fluid.
- Floating equilibrium: For a body to float at rest without rotation, the magnitude of buoyant force equals weight (W = ρ_f g ∇), and the lines of action of weight and buoyancy are collinear (no net moment). Here ∇ is the displaced fluid volume.
- Submerged equilibrium: A fully submerged body can be in static equilibrium with any density if held (e.g., tethered). If freely suspended, it translates to where the net weight is zero (ρ_body = ρ_fluid) or remains where supported. Stability then depends on relative positions of G and B.
- Metacentre (M): For a floating body given a small angle of heel, the new line of action of buoyancy intersects the original vertical through B at a point called the metacentre M. For small angles, M is effectively fixed relative to the body’s upright position.
- Metacentric height (GM): Defined as the distance between G and M, taken positive when M is above G. It is a key stability measure for small heel angles: larger GM means a stronger restoring moment and “stiffer” (faster) roll.
- Metacentric radius (BM): Distance from B to M. For small angles of heel, BM depends only on the geometry of the waterplane and the displaced volume: BM = I/∇, where I is the second moment of area of the waterplane about the relevant tilt axis; ∇ is displaced volume.
- Waterplane: The intersection of the free surface with the floating body, i.e., the planform area at the waterline. Its second moment of area about the axis of rotation determines BM.
- Transverse vs longitudinal stability:
- Transverse (roll about longitudinal axis): use the waterplane second moment of area about the longitudinal axis through its centroid; denote BM_T, GM_T.
- Longitudinal (pitch about transverse axis): use the waterplane second moment of area about the transverse axis; denote BM_L, GM_L. Typically GM_L >> GM_T for ships.
- Conditions for stability (small angles):
- Floating body: Stable if GM > 0 (M above G); Neutral if GM = 0; Unstable if GM < 0.
- Fully submerged body (no free surface effect on displaced volume): No metacentre concept is needed; B is fixed at the geometric centroid of the body’s volume (for a rigid body; independent of its mass distribution). Stable if G is below B; Neutral if G coincides with B; Unstable if G is above B. Reason: a small rotation causes a restoring couple only if weight acts below the buoyant force.
- How BM = I/∇ arises (derivation outline): For a small heel θ, the submerged volume shape changes by equal and opposite “wedge” volumes on either side of the waterplane. The shift of B to B′ has horizontal distance BB′ ≈ (first moment of these wedges) / ∇ = (I tan θ)/∇. The metacentric radius is BM = BB′ / tan θ = I/∇. Assumptions: small heel, hydrostatic, plane free surface.
- GM from geometry and mass distribution: With distances measured upward from a convenient base (e.g., keel), BG = KG − KB, hence GM = BM − BG = KB + BM − KG.
- Draft and KB for simple shapes: For a prismatic, upright floating body with uniform cross-section, KB is at the centroid of displaced volume, so KB = draft/2. For non-prismatic hulls, KB must be computed from geometry of displaced volume.
- Restoring moment: For small heel θ (in radians), restoring moment ≈ W · GM · θ, where W is the weight (N). This linearized restoring law underpins small-angle roll dynamics.
- Small-angle roll period: Modeling the body as a rigid mass with mass moment of inertia I_G about its roll axis through G, the linearized equation I_G θ¨ + W·GM·θ = 0 gives natural period T = 2π √(I_G / (W·GM)) = 2π √(k² / (g·GM)), where k is radius of gyration about the roll axis (I_G = m k², W = m g).
- Real vs ideal behavior: Real floating bodies have damping from viscous drag, wave radiation, and internal fluids (free-surface sloshing). Large heel angles invalidate small-angle assumptions (M is no longer fixed; “wall-sided” corrections apply in naval architecture). Free surfaces in tanks reduce effective GM (free-surface effect), lowering stability; quantitative corrections depend on tank geometry and fluid density inside relative to outside water (see “verify” note in this document for details).
- Orientation choice for floating solids: Slender solids (e.g., a wooden prism) may float stably only in orientations that maximize BM and minimize BG so that GM > 0. This explains why a long log tends to float with its long axis horizontal.
- Sign conventions:
- Distances upward from base are positive.
- GM is positive when M lies above G (stable).
- Heel angle θ positive by right-hand rule about the roll axis; restoring moment is taken opposite in sign to θ (i.e., stabilizing).
Formulas
F_B = ρ_f g ∇
- Buoyant force equals fluid density × g × displaced volume. F_B in N, ρ_f in kg/m³, g in m/s², ∇ in m³. Hydrostatics.
W = ρ_f g ∇ (for a floating body at equilibrium)
- Weight equals buoyant force. W in N. Applies to floating equilibrium (no vertical acceleration).
fraction submerged = ρ_body / ρ_f
- For a homogeneous floating solid with uniform cross-section and axis vertical. Dimensionless. Assumes no capillarity and stable upright flotation.
BM = I / ∇
- Metacentric radius from B to M. I is second moment of waterplane area about the relevant axis (m⁴); ∇ is displaced volume (m³). Small-angle approximation.
GM = KB + BM − KG
- Metacentric height from G to M. KB (m) is center of buoyancy above base, KG (m) is center of gravity above base. Small-angle hydrostatic stability.
KM = KB + BM
- Metacentric height above the base (e.g., keel). KM, KB, BM in m. Useful alternative form; then
GM = KM − KG.
GM = KM − KG
- Equivalent definition using KM. GM, KM, KG in m. Small-angle hydrostatic stability.
Restoring moment (small θ): M_R ≈ W · GM · θ
- M_R in N·m, W in N, GM in m, θ in radians. Small-angle linearization.
T_roll = 2π √(I_G / (W · GM)) = 2π √(k² / (g · GM))
- Small-angle natural roll period. T in s; I_G in kg·m² about roll axis through G; W in N; k in m; g in m/s²; GM in m. Neglects damping and coupling with sway/heave.
I_T,rectangle(longitudinal axis) = (L B³) / 12
- Waterplane second moment of area about the longitudinal axis through centroid for a rectangular waterplane of length L (m) and breadth B (m). Units m⁴.
I_L,rectangle(transverse axis) = (B L³) / 12
- Waterplane second moment of area about the transverse axis through centroid for a rectangular waterplane of breadth B (m) and length L (m). Units m⁴.
I_T,circle (about any diameter) = (π r⁴) / 4
- Waterplane second moment of area for a circular waterplane of radius r (m) about a diameter. Units m⁴.
∇ = A_wp × draft (for a prismatic upright body)
- Displaced volume equals waterplane area A_wp (m²) times draft (m). Units m³. Assumes vertical sides (prismatic).
KB = draft / 2 (for a prismatic upright body)
- Center of buoyancy is at mid-draft. KB in m. Assumes uniform cross-section with vertical sides.
Stability criteria (floating): GM > 0 stable; GM = 0 neutral; GM < 0 unstable
- Small-angle hydrostatic stability.
Stability criteria (fully submerged body): G below B stable; G = B neutral; G above B unstable
- Applies when entire body remains submerged and B is fixed at centroid of volume.
h_max,cylinder(vertical) = r / √(2 s (1 − s))
- Maximum height h for a vertical circular cylinder of radius r (m) and specific gravity s = ρ_body/ρ_f to be statically stable (GM ≥ 0). Derived from GM = 0 with KB = (s h)/2, BM = r²/(4 s h), KG = h/2. Small-angle; neglects surface tension.
BM_L = I_L / ∇, BM_T = I_T / ∇
- Longitudinal and transverse metacentric radii using the corresponding waterplane second moments of area I_L (about transverse axis) and I_T (about longitudinal axis), in m⁴; ∇ in m³.
GM_corrected ≈ GM − (ρ_i/ρ_o) (I_f / ∇)
- Indicative free-surface correction: reduces GM due to a liquid free surface inside a tank. ρ_i is density in tank (kg/m³), ρ_o is outside water density (kg/m³), I_f is second moment of the free surface area in the tank about the corresponding axis (m⁴), ∇ is displaced volume (m³). Note: when ρ_i ≈ ρ_o, many exam treatments use the simpler
GM_corrected ≈ GM − Σ(I_f / ∇); verify the convention used.
Worked examples
Example 1 (direct): GM of a rectangular pontoon Given: Length L = 20.0 m; Breadth B = 6.00 m; Draft t = 2.00 m (upright); Center of gravity above keel KG = 1.60 m; Fresh water, ρ = 1000 kg/m³. Assumptions: Prismatic, vertical sides; small-angle stability; hydrostatic.
Steps:
- Displaced volume: formula
∇ = L × B × t. Calculation: ∇ = 20.0 m × 6.00 m × 2.00 m = 240 m³. - KB (prismatic): formula
KB = draft / 2. Calculation: KB = 2.00 m / 2 = 1.00 m. - Waterplane second moment about longitudinal axis: formula
I_T = (L B³) / 12. Calculation: B³ = (6.00 m)³ = 216 m³; I_T = (20.0 m × 216 m³) / 12 = (4320 m⁴) / 12 = 360 m⁴. - Metacentric radius: formula
BM = I / ∇. Calculation: BM = 360 m⁴ / 240 m³ = 1.50 m. - Metacentric height: formula
GM = KB + BM − KG. Calculation: GM = 1.00 m + 1.50 m − 1.60 m = 0.90 m.
Answer: The pontoon is stable with GM = 0.90 m (positive). Final: GM = 0.90 m.
Example 2 (GATE-style): Maximum stable height of a vertical floating cylinder A uniform solid circular cylinder floats with its axis vertical in water. Find the maximum height h for which the vertical position is (just) stable. Given: Radius r = 0.250 m; Specific gravity s = 0.60 (i.e., ρ_body = 0.6 ρ_water). Assumptions: Small-angle stability; negligible surface tension; cylinder floats upright.
Steps:
- Relate submerged height to specific gravity: formula
fraction submerged = s. Submerged height t = s h = 0.60 h. - KB for prismatic vertical cylinder: formula
KB = t / 2. KB = (0.60 h) / 2 = 0.30 h. - Waterplane second moment for a circular area: formula
I_T = (π r⁴) / 4. r⁴ = (0.250 m)⁴ = 0.00390625 m⁴; I_T = 0.0030679616 m⁴. - Displaced volume: formula
∇ = A_wp × t = π r² × (s h). r² = 0.0625 m²; π r² = 0.19634954 m²; ∇ = 0.19634954 × 0.60 h = 0.11780972 h m³. - BM: formula
BM = I / ∇ = r² / (4 s h)(since π cancels). BM = 0.0625 / (2.4 h) = 0.0260416667 / h m. - KG for uniform cylinder: formula
KG = h / 2(from base/keel). - GM condition for neutral stability: formula
GM = KB + BM − KG = 0at the limit. 0.30 h + (0.0260416667 / h) − 0.50 h = 0 → (−0.20 h) + (0.0260416667 / h) = 0. Rearranged: 0.0260416667 / h = 0.20 h → h² = 0.0260416667 / 0.20 = 0.130208333. h = √0.130208333 ≈ 0.360845 m. - Cross-check with the compact formula
h_max = r / √(2 s (1 − s)): 2 s (1 − s) = 2 × 0.60 × 0.40 = 0.48; √0.48 ≈ 0.692820; h_max = 0.250 / 0.692820 ≈ 0.360845 m.
Answer: Maximum stable height h_max ≈ 0.361 m. Final: h_max = 0.361 m.
Common mistakes
- Using the wrong axis for I: For transverse stability use I about the longitudinal axis; for longitudinal stability use I about the transverse axis.
- Confusing KG and GK: Always use GM = KB + BM − KG with consistent upward distances (or GM = KM − KG with KM = KB + BM).
- Forgetting that I has units of m⁴ and ∇ has m³; BM must have units of metres.
- Plugging I of a rectangle or circle incorrectly (mixing up which side is cubed): the dimension perpendicular to the axis of rotation is cubed.
- Assuming KB = t/2 for non-prismatic or flared hulls; it is exact only for prismatic vertical-sided shapes.
- Using BM = I/Volume of body (instead of displaced volume); for floating stability it is the displaced fluid volume ∇ that matters.
- Omitting g in the roll period formula or mixing W (N) and m (kg).
- Applying small-angle GM criteria to large heel angles; M is not fixed for large angles.
- Ignoring free-surface effect when there is fluid inside the body; it reduces effective GM.
For GATE ME
- Conceptual questions: Archimedes’ principle; identify B, G, M; explain stability conditions for floating and submerged bodies.
- Direct calculations: Compute draft from mass and dimensions; compute KB, BM = I/∇, and GM = KB + BM − KG for simple shapes (rectangular pontoon, circular cylinder).
- Orientation/stability selection: For a wooden block of given dimensions, decide which face will be the waterplane for stable flotation (compare GM for possible orientations).
- Combined problems: Given dimensions and KG, test for stability (sign of GM), and possibly compute small-angle roll period using T = 2π √(I_G / (W·GM)) or T = 2π √(k² / (g·GM)).
- Waterplane moment skills: Quickly compute I for rectangles and circles about the correct axis; remember I_T,rectangle(longitudinal) = L B³ / 12 and I_L,rectangle(transverse) = B L³ / 12; I_circle = π r⁴ / 4 about any diameter.
- Submerged body stability: Decide stability by comparing positions of G and B (no metacentre for fully submerged rigid body in a homogeneous fluid).
- Practise: Setting up consistent sign and reference (keel/base), careful units, and small-angle assumptions. Be ready to derive BM = I/∇ in outline (wedge argument) if asked.
Quick check
- A floating body has BM = 2.0 m, KB = 0.8 m, KG = 1.9 m. Is it stable for small angles? What is GM?
- For a rectangular waterplane (L × B), what is I about the longitudinal axis through its centroid?
- A fully submerged homogeneous body in water has G above B. Is the equilibrium under small rotations stable, neutral or unstable?
Answers: (1) GM = 0.8 + 2.0 − 1.9 = 0.9 m > 0, so stable. (2) I_T = L B³ / 12. (3) Unstable.
Finished this topic? Mark it so your progress, study plan and readiness keep up.
Stuck on something here?