First Year Engineering is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Communication systems and modulation

Communication systems, need for modulation, analog modulation (AM, DSB-SC, SSB), angle modulation (FM, PM), spectra and bandwidth, noise and SNR, transmit–receive blocks, with formulas and examples.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Communication systems move information from one place to another reliably and efficiently. Engineers use modulation to fit signals onto practical channels like air (radio), copper cables, or optical fiber, making long-distance wireless links, broadcasting, telemetry, and IoT possible.

Key ideas

  • Carrier: A high-frequency sinusoidal signal used to carry the baseband signal over the channel. General form: c(t) = Ac cos(2πfc t + φc).
  • Modulation: The process of varying a parameter of a high-frequency carrier (amplitude, frequency, or phase) in proportion to the baseband signal. Purpose: efficient radiation by antennas, reduced interference, multiplexing multiple users, frequency translation to avoid distortion.
  • Demodulation (detection): The reverse process at the receiver to recover the baseband signal from the modulated carrier.
  • Channel: The physical medium (free space, cable, fiber). A channel adds attenuation and noise and has a limited bandwidth (the range of frequencies it can pass).
  • Noise: Unwanted random electrical signals that interfere with the message. Thermal (Johnson-Nyquist) noise is commonly modeled as white Gaussian noise with flat power spectral density over the band of interest.
  • Signal-to-Noise Ratio (SNR): A measure of signal quality. Linear SNR = signal power / noise power. In decibels, SNR(dB) = 10 log10(SNR).
  • Assumptions often used: linear, time-invariant systems; additive white Gaussian noise (AWGN); ideal filters where stated.

Analog modulation types

  • Amplitude Modulation (AM): The amplitude of the carrier is varied in proportion to the baseband message m(t) (normalized to |m(t)| ≤ 1 for distortion-free AM). Standard (conventional) AM includes carrier and two symmetric sidebands.
    • Mathematical definition (standard AM): sAM(t) = Ac[1 + m·mN(t)] cos(2πfc t), where m is the modulation index (0 ≤ m ≤ 1 for no overmodulation), and mN(t) is the normalized message with |mN(t)| ≤ 1. Percent modulation = m × 100%.
    • Spectrum: A discrete carrier at fc and two sidebands centered at fc ± fm for each message frequency fm. For a single-tone message mN(t) = cos(2πfm t), sidebands at fc ± fm.
    • Bandwidth: For a baseband limited to B (Hz), the AM bandwidth is 2B.
    • Variants: DSB-SC (double sideband suppressed carrier—carrier removed, needs coherent detection), SSB (single sideband—one sideband transmitted, halving bandwidth), VSB (vestigial sideband—partial sideband retained, used in TV).
  • Angle Modulation: The angle (phase) of the carrier is varied.
    • Frequency Modulation (FM): The instantaneous frequency deviates from fc proportional to m(t). Definition: sFM(t) = Ac cos[2πfc t + 2π ∫0^t kf m(τ) dτ], where kf is frequency sensitivity (Hz per unit of m(t)). For a single-tone m(t) = Am cos(2πfm t), the frequency deviation Δf = kf Am and the modulation index β = Δf/fm.
    • Phase Modulation (PM): The instantaneous phase deviates proportional to m(t). Definition: sPM(t) = Ac cos[2πfc t + kp m(t)], where kp is phase sensitivity (radians per unit of m(t)). For a single-tone m(t) = Am cos(2πfm t), the PM modulation index is βPM = kp Am (independent of fm).
    • Bandwidth (approximate): For single-tone FM/PM with β not very small, Carson’s rule gives total bandwidth ≈ 2(Δf + fm) for FM, and ≈ 2(βPM fm + fm) for PM, i.e., 2(β + 1)fm in both forms by defining β appropriately.
    • Power: In angle modulation, total transmitted power remains Ac^2/2 (for unit load) independent of β (power redistributes among carrier and sidebands).

Why modulation is needed

  • Antenna size: Efficient radiation needs antenna length ~λ/4. Without modulation, baseband low frequencies would need impractically large antennas.
  • Multiplexing and interference reduction: Shifting many users to distinct carrier frequencies or bands allows sharing of the medium.
  • Noise performance: FM/PM can offer improved noise immunity compared to AM under many conditions (threshold effect considerations apply).

Basic block diagrams to draw and label in exams

  1. Communication system: Source → Transmitter (source coding/line coding if digital, analog processing, modulator, RF amplifier) → Channel (with noise n(t)) → Receiver (RF front-end, select/filter, demodulator, baseband processing) → Destination. Clearly label “modulator,” “channel with noise,” and “demodulator.”
  2. AM transmitter (low-level): Audio amplifier → Balanced modulator (for DSB-SC) → Add carrier (for standard AM) → RF amplifier → Antenna.
  3. Superheterodyne receiver: Antenna → RF amplifier → Mixer + Local Oscillator (LO) → Intermediate Frequency (IF) filter/amplifier → Demodulator (envelope detector for AM or discriminator for FM) → Audio amplifier → Speaker. Mark IF and LO.
  4. Spectra sketches: For single-tone AM, draw a vertical line at fc (carrier) and two smaller lines at fc − fm and fc + fm; label amplitudes or power relations if asked. For FM, indicate multiple sidebands around fc separated by fm.

Common derivations universities ask

  • AM single-tone power and efficiency:
    • Let s(t) = Ac[1 + m cos(2πfm t)] cos(2πfc t). Expand using products-to-sums: s(t) = Ac cos(2πfc t) + (mAc/2)[cos 2π(fc + fm)t + cos 2π(fc − fm)t].
    • Carrier term power Pc = Ac^2/2 (in 1 Ω reference). Each sideband amplitude is mAc/2, giving each sideband power Psb_each = (mAc/2)^2 / 2 = m^2 Ac^2 / 8. Total sideband power Psb_total = m^2 Ac^2 / 4.
    • Total power Ptotal = Pc + Psb_total = Ac^2/2 + m^2 Ac^2/4 = (Ac^2/2)(1 + m^2/2) = Pc(1 + m^2/2).
    • Modulation efficiency ηAM = Psb_total / Ptotal = (m^2/2) / (1 + m^2/2). At m = 1, ηAM = 1/3 ≈ 33.3% (maximum for standard AM).
  • DSB-SC multiplication property: sDSB-SC(t) = Ac m(t) cos(2πfc t). Its spectrum is the baseband spectrum shifted to ±fc without a carrier line. Coherent detection multiplies by cos(2πfc t) and low-pass filters to recover m(t) (assumes carrier phase/frequency alignment).
  • FM instantaneous frequency and β: For sFM(t) = Ac cos[2πfc t + φ(t)], instantaneous frequency fi(t) = (1/2π) d/dt [2πfc t + φ(t)] = fc + (1/2π) dφ/dt. With φ(t) = 2π kf ∫ m(τ) dτ, fi(t) = fc + kf m(t). For single-tone m(t) = Am cos(2πfm t), fi(t) deviates ±Δf with Δf = kf Am; β = Δf/fm.
  • Carson’s rule statement: For single-tone or narrowband message signals where significant sidebands are within the Bessel function index k ≤ β + 1, the approximate transmission bandwidth of FM or PM is BW ≈ 2(Δf + fm) (FM) or equivalently 2(β + 1)fm. Assumes that sidebands with Bessel coefficients below ~2% of carrier amplitude are neglected.

Noise and SNR (brief)

  • In AM with envelope detection and m ≤ 1, baseband SNR is proportional to the RF SNR; including the carrier wastes power but eases detection. In DSB-SC/SSB with coherent detection, for the same transmitted power, better SNR at baseband is possible than standard AM.
  • In FM, for β > 1 and with pre-emphasis/de-emphasis, the output SNR can improve with increasing β (improved noise immunity), up to the threshold region.

Formulas

  • ηAM = (m²/2) / (1 + m²/2) — AM modulation efficiency (unitless). Single-tone AM, m ≤ 1.
  • BW(AM) = 2·B — AM bandwidth; B = highest baseband frequency in Hz. Assumes DSB with carrier.
  • sDSB-SC(t) = Ac·m(t)·cos(2π·fc·t) — DSB-SC signal; Ac in V, m(t) dimensionless or scaled, fc Hz. Coherent detection needed.
  • BW(SSB) = B — SSB bandwidth equals baseband bandwidth B (Hz).
  • sFM(t) = Ac·cos[2π·fc·t + 2π·kf ∫ m(τ) dτ] — FM signal; kf in Hz per unit m(t), t in s.
  • Δf = kf·Am — Peak frequency deviation in Hz for single-tone input amplitude Am (unit of m(t)).
  • β = Δf / fm — FM modulation index (unitless) for single-tone modulation; fm in Hz.
  • BW(FM) ≈ 2·(Δf + fm) = 2·(β + 1)·fm — Carson’s rule for FM bandwidth; Δf in Hz, fm in Hz.
  • sPM(t) = Ac·cos[2π·fc·t + kp·m(t)] — PM signal; kp in rad per unit m(t).
  • βPM = kp·Am — PM modulation index for single-tone input amplitude Am (unitless).
  • BW(PM) ≈ 2·(βPM·fm + fm) = 2·(βPM + 1)·fm — Carson-type bandwidth estimate for PM; fm in Hz.
  • SNR(dB) = 10·log10(Psignal / Pnoise) — Signal-to-noise ratio in decibels; powers in W; valid for positive powers.
  • Pc = Ac² / (2·R) — Carrier power; Ac in V (rms amplitude relates accordingly), R in Ω. In many derivations R = 1 Ω for simplicity.

Worked examples

  1. AM power and bandwidth for single-tone modulation Given: Carrier power Pc = 400 W, modulation index m = 0.6, message is single-tone at fm = 5 kHz. Steps:

  2. Formula for total AM power: Ptotal = Pc(1 + m²/2).

  3. Compute m²/2 = (0.6)²/2 = 0.36/2 = 0.18 (unitless).

  4. Ptotal = 400 W × (1 + 0.18) = 400 × 1.18 = 472 W.

  5. Sideband power total Psb_total = Ptotal − Pc = 472 − 400 = 72 W. Each sideband (single-tone) has half of this: 36 W.

  6. Bandwidth for standard AM with single-tone: BW = 2·fm = 2 × 5 kHz = 10 kHz. Answer: Total AM power = 472 W, each sideband power = 36 W, bandwidth = 10 kHz.

  7. FM deviation, modulation index, and bandwidth (Carson) Given: A single-tone modulating signal at fm = 3 kHz, frequency deviation Δf = 45 kHz. Steps:

  8. Modulation index β = Δf / fm = 45 kHz / 3 kHz = 15 (unitless).

  9. Carson’s rule bandwidth BW ≈ 2(Δf + fm) = 2(45 kHz + 3 kHz) = 2 × 48 kHz = 96 kHz. Answer: FM modulation index β = 15, approximate bandwidth = 96 kHz.

  10. Model answer outline: Explain the superheterodyne receiver and why an IF is used Requested: “Explain with a neat block diagram the working of a superheterodyne receiver. Why is an intermediate frequency (IF) used?” Model answer points:

  • Definition: A superheterodyne receiver converts the received RF signal to a fixed intermediate frequency (IF) using mixing with a local oscillator (LO), then performs most of the selectivity and gain at the IF before demodulation.
  • Diagram to draw and label: Antenna → RF amplifier (label: selects desired band, improves sensitivity) → Mixer (label: nonlinear device) + Local Oscillator LO (label: tunable, frequency fLO) → IF filter/amplifier (label: fixed center frequency fIF, high selectivity and gain) → Demodulator (label according to modulation: envelope detector for AM, FM discriminator for FM) → Audio/baseband amplifier → Output (speaker/data).
  • Working: The mixer produces sum and difference frequencies. Choose fIF = |fLO − fRF| using appropriate LO tuning. The IF filter passes only the fixed fIF, rejecting others. The demodulator recovers the baseband. Automatic gain control (AGC) may be used.
  • Why IF is used: A fixed IF allows use of high-Q, stable filters and amplifiers with consistent bandwidth and gain, leading to better selectivity and sensitivity than trying to accomplish all filtering at the RF that varies with tuning.
  • Note image frequency issue: An undesired station at fimage = fRF + 2·fIF (for high-side LO) can also mix to IF; front-end RF selectivity is used to reject it. Full-marks answer includes: clear labeled block diagram, definition of mixing and IF, explanation of advantages, and a brief note on image frequency and AGC.

Common mistakes

  • Mixing up FM and PM indices: In FM, β = Δf/fm; in PM, βPM = kp Am (does not depend on fm for a single tone).
  • Using Carson’s rule blindly for very small β (narrowband FM). For β ≪ 1, BW ≈ 2fm is a better approximation (two significant sidebands), though Carson still returns close to 2fm when Δf is small.
  • Claiming FM total transmitted power depends on β. It does not; power redistributes among carrier and sidebands, but total remains constant for fixed Ac.
  • Ignoring units in numericals (kHz vs Hz), leading to wrong β and bandwidth.
  • In power derivations, forgetting the 1/2 factor when converting from amplitude to average power for sinusoids.

For your exam

  • Derivations: AM power and efficiency for single-tone modulation; FM instantaneous frequency and β; Carson’s rule statement/justification; relation between PM and FM for m(t) = ∫ message or derivative correspondence.
  • Numericals: Compute AM total power and sideband power; find FM β and bandwidth; given Pc and m, find efficiencies; SSB bandwidth calculations.
  • Diagrams: Block diagram of a communication system; spectra for AM and FM; superheterodyne receiver blocks. Clearly label frequencies (fc, fm, fIF) and components.
  • Full-marks answers include: correct formulas with definitions of symbols and SI units, clear assumptions (single-tone, linear system, AWGN if mentioned), neat labeled diagrams, and final numeric answers with units.

Quick check

  1. A 1 kHz tone amplitude-modulates a 1 MHz carrier with m = 0.5. What is the AM bandwidth?
  2. For FM with Δf = 30 kHz and fm = 5 kHz, find β and the Carson bandwidth.
  3. State one advantage of using an intermediate frequency (IF) in a receiver. Answers: 1) 2 kHz. 2) β = 6, BW ≈ 2(30 kHz + 5 kHz) = 70 kHz. 3) Better selectivity and stable filtering at a fixed frequency.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?