First Year Engineering is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Cellular communication and GSM

Cellular concept, GSM architecture and channels, frequency reuse and capacity, TDMA frames, GMSK, handover, identifiers and SIM, basic link budget, and typical exam numericals.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Cellular communication and GSM are the backbone ideas behind mobile voice and data networks. An engineer uses these to plan cell sites, estimate coverage and capacity, understand call setup and handover, and debug issues in practical systems like IoT devices that use GSM modules.

Key ideas

  • Frequency reuse: The practice of using the same radio frequency channels in non-adjacent cells so that limited spectrum can serve many users. Cells using the same frequency set are called co-channel cells.
  • Cluster (reuse pattern): A group of adjacent cells that collectively use all available frequency channels once. The cluster size is denoted by N. After N cells, the frequency pattern repeats.
  • Reuse ratio: A measure of co-channel separation. For a regular hexagonal layout, the reuse ratio q is defined as q = D/R, where D is the distance between centers of nearest co-channel cells and R is the cell radius. For cluster size N, q = √(3N).
  • Co-channel interference (CCI): Interference between cells using the same frequency set. Increasing N (larger cluster) increases D and reduces CCI but reduces capacity per cell.
  • Adjacent-channel interference (ACI): Interference due to imperfect filtering causing leakage from nearby frequencies. Managed by guard bands and good RF filtering.
  • Multiple access: How many users share spectrum.
    • FDMA (Frequency Division Multiple Access): Users separated by frequency.
    • TDMA (Time Division Multiple Access): Users separated by time slots within a frequency channel.
    • CDMA (Code Division Multiple Access): Users separated by spreading codes. GSM uses a combination of FDMA and TDMA.
  • GSM (Global System for Mobile communications): A 2G digital cellular standard using FDMA to create 200 kHz radio carriers, and TDMA to divide each carrier into 8 time slots. It uses GMSK modulation and a layered channel structure (traffic and control channels).
  • Network elements:
    • MS (Mobile Station): The handset + SIM card.
    • BTS (Base Transceiver Station): Radio equipment and antennas serving a cell.
    • BSC (Base Station Controller): Controls multiple BTSs, handles radio resource management and intra-BSC handovers.
    • MSC (Mobile Switching Centre): Switch for calls and mobility management, interfaces to PSTN/ISDN.
    • HLR (Home Location Register): Database of subscriber permanent data and current MSC/VLR location.
    • VLR (Visitor Location Register): Temporary database for subscribers currently in the MSC area.
    • AuC (Authentication Centre): Stores secret key Ki and generates authentication triplets.
    • EIR (Equipment Identity Register): Database of IMEI (equipment identifiers), used to block stolen devices.
  • SIM (Subscriber Identity Module): Smart card storing IMSI (permanent identity), Ki (secret key), and temporary identities. Required for network access and authentication.
  • Identifiers:
    • IMSI (International Mobile Subscriber Identity): Up to 15 digits identifying the subscriber globally.
    • MSISDN: The telephone number assigned to the subscriber (E.164 format).
    • IMEI (International Mobile Equipment Identity): Unique device identifier.
    • TMSI (Temporary Mobile Subscriber Identity): Assigned by the VLR for privacy on the air interface.
  • GSM frequency bands (common): GSM‑900: uplink 890–915 MHz, downlink 935–960 MHz. DCS‑1800 (also called GSM‑1800): uplink 1710–1785 MHz, downlink 1805–1880 MHz. Also widely used: GSM‑850: uplink 824–849 MHz, downlink 869–894 MHz (45 MHz duplex); PCS‑1900: uplink 1850–1910 MHz, downlink 1930–1990 MHz (80 MHz duplex). Operators are allocated licensed frequency blocks; individual 200 kHz channels are identified by ARFCNs (Absolute Radio Frequency Channel Numbers).
  • GSM channel structure:
    • Carrier spacing: 200 kHz (FDMA).
    • TDMA frame: 8 time slots per frame; each slot is a physical channel; logical channels are mapped onto bursts across multiframes.
    • Modulation: GMSK (Gaussian Minimum Shift Keying) with BT ≈ 0.3, constant envelope, suitable for power-efficient amplifiers.
    • Gross bit rate: 270.833 kbps per carrier; one slot is 1/8 of the frame.
    • Time slot duration: 577 µs; 8 slots form one frame of 4.615 ms.
    • Logical channels:
      • Traffic channels (TCH): carry voice/data.
      • Control channels: Broadcast (BCCH), Frequency Correction (FCCH), Synchronization (SCH), Common Control Channel group (CCCH: Paging PCH, Random Access RACH, Access Grant AGCH), Standalone Dedicated Control Channel (SDCCH), Slow Associated Control Channel (SACCH) associated with TCH/SDCCH, and Fast Associated Control Channel (FACCH) used for urgent in‑call signaling (implemented by stealing TCH bursts).
  • Call setup (outline):
    1. MS powers on, listens to BCCH, synchronizes via FCCH/SCH.
    2. MS sends RACH request for access.
    3. Network responds on AGCH assigning an SDCCH.
    4. Authentication and ciphering (AuC/HLR involved via MSC/VLR).
    5. Location update if needed.
    6. For mobile-originated call, the network allocates a TCH; for terminated call, paging on PCH precedes assignment.
  • Authentication and ciphering:
    • Network sends a random challenge RAND.
    • SIM computes SRES = A3(Ki, RAND) and Kc = A8(Ki, RAND).
    • MS returns SRES; network verifies. Kc is used for air-interface encryption.
  • Timing Advance (TA): To keep uplink bursts aligned at the BTS, the MS advances its transmission start by TA steps. One TA step equals one GSM bit period (~3.692 µs). Each step roughly corresponds to ~550 m of additional one-way distance. Maximum TA value is 63, limiting typical cell radius to about 35 km in standard GSM timing.
  • Handover (handoff): Transfer of an active call from one radio channel/cell to another to maintain service quality and continuity.
    • GSM typically uses hard handover (break-before-make) coordinated by BSC/MSC.
    • Types: Intra-cell (between frequencies in same cell), inter-cell intra-BSC, inter-BSC, inter-MSC.
    • Decision uses measurements: received signal strength and quality (BER), neighbor cell reports.
  • Capacity vs. quality trade-off: Smaller N (e.g., 3 or 4) gives more channels per cell (higher capacity) but higher CCI; larger N (e.g., 7 or 12) improves SIR but reduces per-cell capacity. Sectoring (e.g., 3 sectors per site) can improve SIR and reuse efficiency.
  • Basic link budget idea: Received power = Transmit power + Gains − Losses. Losses include path loss (free-space or empirical models like Hata), shadowing, fading, body/indoor penetration, feeder/coupler losses, margins. Link budget ensures sufficient SNR for target BER/voice quality.

Exact statements and derivations commonly asked

  • Definition — Cellular system: A cellular mobile radio system is one in which the service area is partitioned into cells with base stations, and the same set of frequencies is reused in different cells separated by a minimum reuse distance to control co-channel interference.
  • Cluster size formula (hexagonal model): For integers i, j ≥ 0, the cluster size is N = i² + i·j + j². The nearest co-channel reuse distance is D = √(3N)·R, where R is cell radius. Thus the reuse ratio is q = D/R = √(3N). Derivation idea: In the hexagonal grid, co-channel cells are located by moving i cells along one axis and j cells along the 60° axis; geometry yields D/R = √(3N).
  • Capacity per cell: If M is total number of radio carriers (frequency channels) available system-wide, then each cell in a cluster gets M/N carriers by frequency planning. In GSM, each carrier has 8 time slots; effective traffic channels per cell depend on control channel reservation and sectoring.
  • Free-space path loss (FSPL): For distance d and frequency f, FSPL in dB is FSPL(dB) = 32.44 + 20·log10(f_MHz) + 20·log10(d_km). Assumptions: isotropic antennas, line-of-sight, far-field, no multipath.

What to draw and label for exams

  • Cellular reuse diagram: Draw a hexagonal grid. Choose N = 7 pattern; shade one cluster of 7 adjacent hexagons and label frequency sets F1 to F7. Show another cluster repeating the same F1…F7 away from the first. Draw lines indicating D between co-channel cell centers and R from a center to a vertex. Label D, R, and write q = D/R = √(3N).
  • GSM architecture diagram: On left, draw multiple MS icons connecting by radio to BTS1, BTS2. From BTSs, draw lines to a BSC box. From BSC to MSC. From MSC, draw links to HLR/AuC/VLR/EIR boxes and to PSTN cloud. Label the radio interface Um between MS and BTS, Abis between BTS and BSC, and A interface between BSC and MSC. Also indicate BCCH/CCCH on a carrier at BTS.
  • GSM TDMA frame: Draw a rectangle for one carrier frame (4.615 ms), divide into 8 equal time slots (each 577 µs), label TS0…TS7. Mark that TS0 may carry BCCH/CCCH/SDCCH in control carriers, and other slots carry TCH/associated control.

Formulas

N = i² + i·j + j² — Cluster size for hexagonal frequency reuse; i, j are non-negative integers; dimensionless; use for planning reuse patterns like N = 3, 4, 7, 12.

q = D/R = √(3N) — Reuse ratio; D is co-channel distance (m), R is cell radius (m), N is cluster size; applies to ideal hexagonal layout.

Number of carriers per cell = M / N — M is total carriers (frequency channels) available; N is cluster size; carriers per cell is dimensionless; used in capacity estimation.

Traffic channels per cell ≈ (carriers per cell) × 8 − (control slot reservations) — Each GSM carrier has 8 TDMA time slots; subtract control/BCCH/SDCCH slots as planned.

Bit rate per carrier = 270.833 kbps — Gross bit rate on one GSM 200 kHz carrier; equals approximately 33.854 kbps gross per time slot; used for timing and slot calculations.

Time slot duration = 577 µs — One TDMA burst duration; used to align bursts.

Frame duration = 4.615 ms — 8 slots per frame; timing reference. GSM frame hierarchy: 26‑multiframe (traffic) = 120 ms; 51‑multiframe (control) = 235.4 ms; superframe = 6.12 s; hyperframe = 3 h 28 m 53.76 s (2,715,648 frames).

One TA step ≈ 3.692 µs — GSM bit period; used for Timing Advance granularity.

Distance per TA step ≈ 550 m — Approximate one-way distance represented by one TA step; meters; used to estimate MS–BTS distance from TA.

Maximum TA distance ≈ 63 × 550 m ≈ 35 km — Typical GSM maximum supported one-way distance; applies to standard timing limits.

λ = c / f — Wavelength; c ≈ 3.00×10⁸ m/s, f in Hz, λ in meters; used for antenna and propagation basics.

FSPL(dB) = 32.44 + 20·log10(f_MHz) + 20·log10(d_km) — Free-space path loss; f in MHz, d in km; used in rough link budgets.

Worked examples

  1. Capacity with frequency reuse in GSM Given: Total paired spectrum for downlink usable carriers M = 124 (e.g., GSM‑900 nominal), cluster size N = 7, each carrier has 8 time slots. In each cell, reserve 1 time slot on one carrier for BCCH/CCCH/SDCCH (simplified assumption: 1 control slot per cell). Find approximate traffic channels per cell.

Steps:

  1. Formula: carriers per cell = M / N.
  2. Numbers: carriers per cell = 124 / 7 ≈ 17.714 ≈ 17 carriers (integer planning; one cell may get 18 in a balanced plan, but take 17 for conservative estimate).
  3. Traffic slots per carrier = 8.
  4. Total slots per cell = 17 × 8 = 136 slots.
  5. Reserve control = 1 slot.
  6. Traffic channels per cell ≈ 136 − 1 = 135.

Answer: Approximately 135 traffic channels per cell (with the given simplifications and rounding to 17 carriers per cell).

  1. Estimating MS–BTS distance from Timing Advance Given: A GSM phone reports TA = 20. Estimate the distance from the BTS.

Steps:

  1. Formula: Distance ≈ TA × 550 m.
  2. Numbers: Distance ≈ 20 × 550 m = 11,000 m = 11.0 km.

Answer: The mobile is approximately 11.0 km from the BTS (one-way distance, assuming flat terrain and standard GSM timing).

  1. Free-space path loss at 900 MHz Given: Frequency f = 900 MHz, distance d = 5.0 km. Find FSPL.

Steps:

  1. Formula: FSPL(dB) = 32.44 + 20·log10(f_MHz) + 20·log10(d_km).
  2. Substitute: FSPL = 32.44 + 20·log10(900) + 20·log10(5.0).
  3. Compute: log10(900) ≈ 2.95424; 20·log10(900) ≈ 59.0848 dB.
  4. log10(5.0) ≈ 0.69897; 20·log10(5.0) ≈ 13.979 dB.
  5. Sum: FSPL ≈ 32.44 + 59.0848 + 13.979 ≈ 105.504 dB.

Answer: Free-space path loss ≈ 105.5 dB at 900 MHz over 5.0 km.

  1. Model long-answer: Explain GSM network architecture and call setup with a neat diagram Model points to include:
  • Draw and label MS, BTS, BSC, MSC, HLR, VLR, AuC, EIR, PSTN. Mark interfaces Um (air), Abis, A.
  • Explain roles: BTS handles radio; BSC controls radio resources and intra-BSC handover; MSC switches calls and manages mobility; HLR stores subscriber profile and current location; VLR caches visiting subscribers; AuC authenticates; EIR checks IMEI; PSTN interconnects to landlines.
  • Call setup (mobile-originated):
    1. MS synchronizes to BCCH/FCCH/SCH of serving cell.
    2. MS requests access on RACH.
    3. BTS/BSC allocates SDCCH via AGCH.
    4. Authentication: Network sends RAND; SIM computes SRES (A3) and Kc (A8); MS returns SRES; ciphering enabled with Kc.
    5. MSC/VLR checks subscription with HLR if needed; location update if required.
    6. Assignment: BSC assigns a TCH (and SACCH) via signaling to MS.
    7. Conversation proceeds on TCH; measurements reported on SACCH.
    8. If signal degrades, BSC/MSC orders handover to a better cell/channel (hard handover), using measurement reports.
  • For a mobile-terminated call: Network pages MS on PCH; MS responds; then similar SDCCH assignment, authentication, and TCH assignment steps follow.

Common mistakes

  • Forgetting that a GSM carrier is 200 kHz wide and has 8 time slots per TDMA frame.
  • Mixing up control channels: BCCH is downlink broadcast; RACH is uplink random access; AGCH is downlink grant; SDCCH carries signaling for call setup and location update.
  • Using the wrong distance for Timing Advance: do not double the 550 m per TA step. The commonly used engineering approximation is 550 m per TA step for the MS–BTS distance estimate.
  • Applying free-space path loss to dense urban scenarios without additional margins; real environments need empirical models/margins.
  • Assuming handover in GSM is always soft like CDMA; GSM handover is typically hard (break-before-make), except in some dual-receiver features not in basic GSM.

For your exam

  • Derivations: N = i² + i·j + j² and q = √(3N) from the hexagonal model; relation between TA and distance; capacity per cell with reuse.
  • Numericals: Calculate carriers per cell and traffic channels from M and N; compute FSPL; estimate distance from TA; basic wavelength at a given frequency.
  • Diagrams: Hexagonal reuse showing D and R; GSM network architecture; TDMA frame with 8 time slots labeled and control/traffic allocation indicated.
  • Full-marks answers include: precise definitions, correct formulas with units and assumptions, clean labeled diagrams, step-by-step calculations carrying units, and a short concluding statement relating results to design trade-offs (capacity vs. interference, coverage vs. timing limits).

Quick check

  1. State the formula for reuse ratio q in a hexagonal cellular network and define symbols.
  2. How many time slots are there per GSM carrier, and what is one slot duration?
  3. A mobile reports TA = 35. Approximately how far is it from the BTS?

Answers: 1) q = D/R = √(3N), where D is co-channel distance, R is cell radius, N is cluster size. 2) 8 time slots per carrier; one slot ≈ 577 µs. 3) Distance ≈ 35 × 550 m ≈ 19.25 km.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?