Semiconductors and the Fermi level
Semiconductors and the Fermi level: intrinsic/extrinsic carriers, Fermi–Dirac statistics, density of states, intrinsic concentration, mass–action law, position of Fermi level with doping/temperature, conductivity, and related formulas and examples.
Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.
Why it matters
Semiconductors are the heart of diodes, transistors, ICs, LEDs, and solar cells. Understanding the Fermi level and carrier concentrations lets engineers predict conductivity, design doping, and analyze devices like p–n junctions and MOSFETs.
Key ideas
- Definition: Valence band (VB) — The range of energies filled by valence electrons bound in bonds; holes in this band act as positive carriers.
- Definition: Fermi level (EF) — The energy at which the probability of occupation by an electron is 1/2 at temperature T for a system in thermal equilibrium. It is a reference for electron energies and determines carrier concentrations.
- Definition: Intrinsic semiconductor — A pure semiconductor with no intentional impurities; electron concentration n equals hole concentration p at equilibrium (n = p = ni).
- Definition: Extrinsic semiconductor — A semiconductor doped with donors (n-type) or acceptors (p-type), giving n ≠ p.
- Definition: Donor (ND) — A shallow impurity that donates an electron to the conduction band when ionized (n-type). Ionized donor is positively charged (ND+).
- Definition: Acceptor (NA) — A shallow impurity that accepts an electron, creating a hole in the valence band (p-type). Ionized acceptor is negatively charged (NA−).
- Definition: Effective mass (m∗) — A parameter describing the response of an electron or hole to forces inside a crystal; appears in density-of-states formulas.
- Definition: Density of states (DOS) — The number of available quantum states per unit energy per unit volume. In 3D parabolic bands, DOS increases with the square root of energy measured from the band edge.
- Definition: Fermi–Dirac distribution — The probability f(E) that a state of energy E is occupied by an electron at temperature T.
- Definition: Non-degenerate semiconductor — A semiconductor where EF is several kT away from Ec and Ev (typically > 3kT), so Maxwell–Boltzmann approximations apply.
- Definition: Intrinsic carrier concentration (ni) — Carrier concentration in an intrinsic semiconductor at temperature T.
- Definition: Mass–action law — At thermal equilibrium and under non-degenerate conditions, the product of electron and hole concentrations is constant at a given T: np = ni².
- Definition: Mobility (μ) — The proportionality between carrier drift velocity and applied electric field: v_d = μE. Units: m²·V⁻¹·s⁻¹.
- Definition: Conductivity (σ) — The ease with which a material conducts charge: σ = q(μn n + μp p), where q is the elementary charge.
- Definition: Einstein relation — The relation between diffusion coefficient D and mobility μ: D/μ = kT/q.
- Equilibrium condition: At thermal equilibrium, the Fermi level EF is spatially constant throughout a connected piece of material. When two materials are joined and reach equilibrium, their Fermi levels align.
- Temperature and doping effects on EF:
- Intrinsic: EF lies near midgap; exact position depends on effective masses (moves slightly toward the band with larger effective mass of the opposite carrier).
- n-type: EF moves upward toward Ec as donor concentration increases.
- p-type: EF moves downward toward Ev as acceptor concentration increases.
- Heavy (degenerate) doping can push EF into a band; then non-degenerate formulas no longer apply.
Exact statements and commonly asked derivations
Fermi–Dirac distribution (exact statement) Assumptions: system in thermal equilibrium; indistinguishable fermions; each state can hold at most one electron per spin; temperature T; chemical potential equals EF at equilibrium. Statement: The probability that an energy state E is occupied by an electron at temperature T is f(E) = 1/(1 + exp[(E − EF)/(kT)]). Derivation outline (exam style): From Fermi–Dirac statistics using grand canonical ensemble, count microstates with occupation numbers 0 or 1; maximize entropy subject to constraints of average particle number and energy via Lagrange multipliers; identify chemical potential μ = EF at equilibrium.
Density of states and effective density of states Assumptions: Parabolic bands near edges; isotropic effective masses m∗n, m∗p; 3D crystal; large volume. Result (without full calculus): DOS near conduction band edge: gc(E) ∝ √(E − Ec). Similarly for valence band, gv(E) ∝ √(Ev − E). Integrating DOS × Fermi–Dirac over energy yields carrier concentrations. In the non-degenerate limit (EF several kT from band edges), we replace Fermi–Dirac with Boltzmann factor and obtain:
- n = Nc exp[−(Ec − EF)/(kT)], with Nc = 2 (2π m∗n kT / h²)^{3/2}
- p = Nv exp[−(EF − Ev)/(kT)], with Nv = 2 (2π m∗p kT / h²)^{3/2} Typical exam derivation: Start from n = ∫_{Ec}^{∞} gc(E) f(E) dE; use gc(E) = (1/2π²)(2m∗n/ħ²)^{3/2} √(E − Ec); assume exp[(E − EF)/kT] ≫ 1; substitute f(E) ≈ exp[−(E − EF)/kT]; evaluate the standard exponential (Gamma-function) integral; collect constants into Nc.
- Intrinsic concentration and mass–action law Assumptions: Non-degenerate; equilibrium; complete ionization of shallow dopants for the temperature in question. Results to remember:
- ni = √(Nc Nv) exp[−Eg/(2kT)]
- Mass–action law: np = ni² (follows from the above two expressions for n and p). Sketch of derivation: For intrinsic, EF = EFi. Write n = Nc exp[−(Ec − EFi)/kT] and p = Nv exp[−(EFi − Ev)/kT]. Multiply: np = Nc Nv exp[−(Ec − Ev)/kT] = Nc Nv exp[−Eg/kT]. Take square root for ni.
Position of the intrinsic Fermi level Result: EFi = (Ec + Ev)/2 + (3/4) kT ln(m∗p/m∗n). If m∗n = m∗p, EFi is at midgap. Derivation: Equate n = p = ni using the non-degenerate forms and solve for EFi.
Charge neutrality and Fermi level in doped semiconductors Assumptions: Equilibrium; full ionization (at room temperature for shallow dopants in Si/Ge this is often valid at moderate doping); non-degenerate. Charge neutrality: n + NA− = p + ND+. In a compensated semiconductor (both donors and acceptors present) under full ionization, the majority carrier concentration is approximately the net dopant density: for n-type with ND > NA, n ≈ ND − NA and p = ni²/n; for p-type with NA > ND, p ≈ NA − ND and n = ni²/p.
- n-type, fully ionized: n ≈ ND, p = ni²/n.
- p-type, fully ionized: p ≈ NA, n = ni²/p. Fermi level (non-degenerate):
- EF = Ec − kT ln(Nc/n) (for electrons)
- EF = Ev + kT ln(Nv/p) (for holes) Thus, for n-type with n ≈ ND, EF is below Ec by kT ln(Nc/ND).
- Conductivity and mobility Assumptions: Low electric fields (ohmic region); independent electron and hole contributions; uniform temperature. Conductivity: σ = q(μn n + μp p). Resistivity: ρ = 1/σ. Temperature trends (qualitative):
- Intrinsic region (high T): ni rises rapidly with T; σ increases with T.
- Extrinsic region (moderate T): dopants fully ionized; σ weakly depends on T due to phonon-scattering mobility reduction.
- Freeze-out region (low T): incomplete ionization; σ decreases as T drops.
Einstein relation Assumptions: Non-degenerate statistics, quasi-equilibrium, isotropic transport. Statement: Dn/μn = Dp/μp = kT/q, relating diffusion coefficient to mobility.
Equilibrium vs non-equilibrium
- Equilibrium: one Fermi level, spatially constant; in the non-degenerate limit np = ni² holds locally.
- Under bias or illumination (e.g., in p–n junctions or solar cells): quasi-Fermi levels for electrons (Fn) and holes (Fp) split; generally n = Nc exp[−(Ec − Fn)/kT], p = Nv exp[−(Fp − Ev)/kT]. (Details are covered again in the p–n junction and solar cells topic.)
Diagrams to draw and label (exam answers)
- Intrinsic semiconductor energy diagram: Draw horizontal Ev and Ec lines; show midgap with EFi; label Eg = Ec − Ev; indicate that n = p = ni.
- n-type semiconductor: Draw Ev, Ec; place EF closer to Ec (below Ec by ΔE); annotate ΔE = kT ln(Nc/n); indicate majority carriers (electrons) and minority (holes).
- p-type semiconductor: Same, with EF closer to Ev; annotate ΔE = kT ln(Nv/p).
- DOS sketch: Plot DOS vs energy; show gc(E) rising as √(E − Ec) and gv(E) rising as √(Ev − E); overlay Fermi–Dirac step-like curve at T = 0 K and smoothed at T > 0 K.
Formulas
f(E) = 1 / (1 + exp[(E − EF)/(k·T)]) — Fermi–Dirac distribution; E and EF in joules (J) or electron-volts (eV, consistent); k: Boltzmann constant (J·K⁻¹); T in kelvin (K); applies at thermal equilibrium.
Nc = 2 · (2π·m∗n·k·T / h²)^(3/2) — Effective density of states in CB; Nc in m⁻³; m∗n electron effective mass (kg); h Planck’s constant (J·s); valid for 3D parabolic band, non-degenerate.
Nv = 2 · (2π·m∗p·k·T / h²)^(3/2) — Effective density of states in VB; Nv in m⁻³; m∗p hole effective mass (kg); same assumptions as Nc.
n = Nc · exp[−(Ec − EF)/(k·T)] — Electron concentration (m⁻³) for non-degenerate semiconductor; Ec, EF energies (J or eV consistently).
p = Nv · exp[−(EF − Ev)/(k·T)] — Hole concentration (m⁻³) for non-degenerate semiconductor.
ni = √(Nc·Nv) · exp[−Eg/(2·k·T)] — Intrinsic concentration (m⁻³); Eg = Ec − Ev (J or eV consistently); non-degenerate.
n·p = ni² — Mass–action law; equilibrium, any doping; non-degenerate.
EF = Ec − k·T·ln(Nc/n) — Position of Fermi level from conduction band edge (non-degenerate); energies in J or eV consistently.
EF = Ev + k·T·ln(Nv/p) — Position of Fermi level from valence band edge (non-degenerate).
EFi = (Ec + Ev)/2 + (3/4)·k·T·ln(m∗p/m∗n) — Intrinsic Fermi level; near midgap if m∗n ≈ m∗p.
σ = q·(μn·n + μp·p) — Conductivity (S·m⁻¹); q = 1.602×10⁻¹⁹ C; μn, μp in m²·V⁻¹·s⁻¹; n, p in m⁻³; low-field, uniform T.
ρ = 1/σ — Resistivity (Ω·m); inverse of conductivity.
Dn/μn = Dp/μp = k·T/q — Einstein relation; Dn, Dp in m²·s⁻¹; μn, μp in m²·V⁻¹·s⁻¹; non-degenerate.
Jdrift = q·(n·μn + p·μp)·E — Drift current density (A·m⁻²); E electric field (V·m⁻¹); low-field regime.
Worked examples
Example 1: Intrinsic carrier concentration of silicon at 300 K Given: Silicon, T = 300 K; band gap Eg = 1.12 eV; Nc(300 K) ≈ 2.8×10²⁵ m⁻³; Nv(300 K) ≈ 1.04×10²⁵ m⁻³; k = 8.617×10⁻⁵ eV·K⁻¹. Steps:
- Formula:
ni = √(Nc·Nv) · exp[−Eg/(2·k·T)]. - Compute √(Nc·Nv): √(2.8×10²⁵ × 1.04×10²⁵) = √(2.912×10⁵⁰) ≈ 1.706×10²⁵ m⁻³.
- Compute kT in eV: kT = 8.617×10⁻⁵ × 300 = 0.02585 eV.
- Exponential term: Eg/(2kT) = 1.12 / (2 × 0.02585) = 21.64; exp(−21.64) ≈ 3.99×10⁻¹⁰.
- Multiply: ni = 1.706×10²⁵ × 3.99×10⁻¹⁰ = 6.81×10¹⁵ m⁻³. Answer: ni(300 K, Si) ≈ 6.8 × 10¹⁵ m⁻³. Note: Common textbook value is about 1.0 × 10¹⁶ m⁻³; variation arises from precise Nc, Nv and Eg used.
Example 2: Position of the Fermi level in n-type Si at 300 K Given: n-type silicon with donor density ND = 1.0×10²² m⁻³, fully ionized; Nc(300 K) = 2.8×10²⁵ m⁻³; kT = 0.02585 eV. Assume non-degenerate and n ≈ ND. Steps:
- Formula:
EF = Ec − k·T·ln(Nc/n). - Compute ln(Nc/n): ln(2.8×10²⁵ / 1.0×10²²) = ln(2.8×10³) = ln(2800) ≈ 7.94.
- Energy separation: ΔE = kT × 7.94 = 0.02585 × 7.94 = 0.205 eV. Answer: EF lies 0.205 eV below Ec. Check non-degeneracy: ΔE ≈ 0.205 eV ≈ 7.9 kT (> 3 kT), so the non-degenerate assumption is valid.
Example 3: Conductivity of the same n-type Si at 300 K Given: From Example 2, n ≈ 1.0×10²² m⁻³; ni ≈ 1.0×10¹⁶ m⁻³ (use 6.8×10¹⁵ m⁻³ if consistent); μn ≈ 0.135 m²·V⁻¹·s⁻¹; μp ≈ 0.045 m²·V⁻¹·s⁻¹ (typical low-doping values); q = 1.602×10⁻¹⁹ C. Steps:
- Minority holes:
p = ni² / n. Using ni = 1.0×10¹⁶ m⁻³, p = (1.0×10¹⁶)² / (1.0×10²²) = 1.0×10¹⁰ m⁻³ (negligible). - Formula:
σ = q·(μn·n + μp·p)≈ q·μn·n. - Compute: σ = 1.602×10⁻¹⁹ × 0.135 × 1.0×10²² = 1.602×0.135×10³ = 0.21627×10³ = 216.3 S·m⁻¹. Answer: Conductivity σ ≈ 2.16 × 10² S·m⁻¹. Resistivity ρ ≈ 4.63 × 10⁻³ Ω·m. Remark: If using ni = 6.8×10¹⁵ m⁻³, then p ≈ 4.6×10⁹ m⁻³; σ changes only in the 6th significant figure.
Common mistakes
- Assuming n = ND at all temperatures. At low T, incomplete ionization (freeze-out) means n < ND.
- Using Eg at 0 K instead of at the stated temperature; Eg(T) decreases with increasing T.
- Inserting energies in eV into formulas that expect joules (or vice versa) without converting consistently.
- Neglecting minority carrier contribution in nearly intrinsic material; for intrinsic Si, n = p = ni and both terms matter in σ.
- Not stating assumptions (equilibrium, non-degenerate, full ionization) in derivations; exam marks are lost for missing assumptions.
For your exam
Expect questions of these types:
- Definitions: semiconductor, intrinsic/extrinsic, Fermi level, density of states, mobility, conductivity, intrinsic concentration, mass–action law, Einstein relation.
- Short notes: effect of doping on EF, temperature dependence of ni and σ, non-degenerate vs degenerate semiconductors, quasi-Fermi levels (with a brief description).
- Derivations: n and p from DOS + Fermi–Dirac (leading to Nc, Nv and the Boltzmann forms); ni formula and mass–action law; position of EFi; Einstein relation.
- Numericals: compute ni at a given T; find EF relative to Ec or Ev for given doping; compute σ and ρ for given n, p, μn, μp; check non-degeneracy condition.
- Diagrams: energy band diagrams for intrinsic, n-type, p-type; DOS sketches; annotate EF, Ec, Ev, Eg and majority/minority carriers. Full-marks answers include: clear definitions with bolded terms, stated assumptions, step-by-step derivations or calculations with units, correctly labeled diagrams (described), and a brief physical interpretation of the result.
Quick check
- Write the expressions for n and p in a non-degenerate semiconductor in terms of EF, Ec, Ev, Nc, Nv.
- State the mass–action law and one condition for its validity.
- For n-type Si at 300 K with ND = 1×10²³ m⁻³, is it safe to use non-degenerate formulas? Justify using kT ≈ 0.0259 eV and Nc = 2.8×10²⁵ m⁻³. Answers: 1) n = Nc·exp[−(Ec − EF)/(kT)], p = Nv·exp[−(EF − Ev)/(kT)]. 2) np = ni²; valid at thermal equilibrium under non-degenerate statistics. 3) ln(Nc/ND) = ln(2.8×10²⁵ / 1×10²³) ≈ ln(280) ≈ 5.64, so EF is ≈ 0.146 eV below Ec (~5.6 kT) — still non-degenerate; non-degenerate formulas are acceptable.
Finished this topic? Mark it so your progress, study plan and readiness keep up.
Stuck on something here?