Artificial Intelligence & Data Science is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Band theory of solids

Band theory of solids: periodic potential → energy bands and gaps, E–k, Brillouin zones, effective mass, electrical classification (metal/semiconductor/insulator), and related formulas and models.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Key ideas

  • Bloch’s theorem (exact statement): In a periodic potential V(r + R) = V(r), the single-electron wavefunction solutions of the Schrödinger equation can be written as ψ_k(r) = u_k(r)·e^{i k·r}, where u_k(r) has the periodicity of the lattice: u_k(r + R) = u_k(r). Consequence: energy eigenvalues are functions of wavevector k, written E_n(k), forming bands labeled by band index n.
  • Energy band: a continuous range of allowed electron energies E_n(k) that arises because atomic orbitals from many atoms split and spread when atoms come together in a periodic array. Adjacent energy ranges with no allowed states are band gaps (forbidden energies).
  • Brillouin zone (BZ): the Wigner–Seitz cell in reciprocal (k) space. The first Brillouin zone is the set of k points closer to the origin than to any other reciprocal lattice point. It contains all unique k due to periodicity in k-space.
  • Reciprocal lattice and zone boundaries: reciprocal lattice vectors G map equivalent k-points: E(k) = E(k + G). Zone boundaries occur where k lies on Bragg planes; energy gaps open at these boundaries due to Bragg reflection of electron waves.
  • Origin of band gaps (qualitative): When the electron de Broglie wavelength satisfies the Bragg condition (2k = G), forward-traveling and back-scattered waves interfere to form standing waves with different charge densities at ion cores, giving two different energies separated by a gap. Assumptions: weak periodic potential (nearly free electron picture) and elastic scattering from the periodic lattice.
  • Nearly free electron (NFE) model: starts from free electrons with E = ħ^2 k^2/(2m_e) and treats V(r) as a small perturbation. Predicts parabolic E–k except near zone boundaries, where gaps open and E–k curves are flattened.
  • Tight-binding (TB) model: starts from localized atomic orbitals and considers small overlap with neighbors. Predicts bands with widths proportional to overlap integrals; band edges occur at k where bonding/antibonding combinations give extrema.
  • Kronig–Penney model: a 1D exactly solvable periodic potential (array of square wells/barriers or δ-barriers) that explicitly yields allowed and forbidden energy regions. It demonstrates how band gaps arise from periodicity. Commonly examined because it is analytically tractable in 1D.
  • Statement of the main Kronig–Penney dispersion relation (1D, square-well form): For a periodic potential of period a with well width b and barrier width (a − b), the allowed energies E satisfy cos(k a) = cos(α b) cosh(β (a − b)) − (P/2) ( (α/β) + (β/α) ) sin(α b) sinh(β (a − b)), where α = √(2mE)/ħ (inside wells), β = √(2m(V0 − E))/ħ (inside barriers), and P depends on barrier strength. For the δ-barrier limit (thin, high barriers), it simplifies to cos(k a) = cos(α a) + (P/α a) sin(α a). Bands occur where |cos(k a)| ≤ 1; gaps where |cos(k a)| > 1. Assumptions: 1D, periodic piecewise-constant potential, single electron, stationary states.
  • Filling of bands and Fermi level at 0 K: Electrons fill the lowest available energy states up to the Fermi energy E_F (highest occupied state at 0 K). If the highest filled band is only partially filled or overlaps with the next band, the solid is a metal; if a filled valence band is separated by a finite gap Eg from an empty conduction band, it is an insulator or semiconductor (small Eg ≲ ~3 eV for semiconductors). Note: full treatment of Fermi level vs temperature belongs to “Semiconductors and the Fermi level.”
  • Effective mass: Near an extremum of a band (minimum for electrons, maximum for holes), E(k) can be approximated by a parabola. Define the scalar effective mass m* by 1/m* = (1/ħ^2) d^2E/dk^2 (for 1D along the principal direction). It modifies Newton-like dynamics: m* replaces the free electron mass m_e in acceleration and density-of-states expressions. At a band maximum, m* is negative for electrons; we treat missing electrons as positively charged quasiparticles called holes with positive mass.
  • Group velocity: The electron wavepacket velocity is v_g = (1/ħ) ∇_k E(k). In 1D, v_g = (1/ħ) dE/dk. Flat bands (small slope) imply low velocity and high effective mass; steep bands imply high mobility (other scattering factors being similar).
  • Semiclassical dynamics in bands: Under a uniform electric field E (vector), ħ dk/dt = −q E for an electron (q = +e magnitude, electron charge −e). Under a magnetic field B, ħ dk/dt = −q (E + v × B). Assumptions: slowly varying fields, no interband transitions.
  • Density of states (DOS): Number of states per unit energy per unit volume. In 3D for a parabolic band minimum at energy Ec with effective mass m* (electrons), g_c(E) = (1/2π^2) (2m*/ħ^2)^{3/2} √(E − Ec) for E ≥ Ec, and zero below. Units: J⁻¹·m⁻³. This is used with Fermi–Dirac statistics in semiconductor analyses (covered in another topic).
  • Diagram to draw and label (energy bands and gaps): Draw E on the vertical axis and k on the horizontal axis from −π/a to +π/a (first BZ). Sketch a parabolic band centered at k = 0 and show a gap at k = ±π/a where the parabola splits. Shade an occupied valence band and show an empty conduction band above with a gap Eg between their edges at k = 0 (direct gap) or at k ≠ 0 (indirect gap). Mark “First Brillouin zone,” “Valence band,” “Conduction band,” and “Band gap Eg.”
  • Diagram to draw and label (Kronig–Penney criterion): Plot y = cos(ka) vs ka and superpose y = f(E) from the right-hand side of the Kronig–Penney equation as a horizontal band for each E (or annotate). Indicate that allowed energies satisfy |cos(ka)| ≤ 1. Label regions as “Allowed bands” and “Forbidden gaps.”
  • Diagram to draw and label (reciprocal lattice and BZ): For 1D, draw k-axis with points 0, ±2π/a, ±4π/a. Shade the interval −π/a to +π/a as the first BZ. Mark Bragg planes at k = ±π/a and note “Gaps open here.”

Derivation sketches commonly asked

  1. Formation of bands from atomic levels (tight-binding picture)
    • Start with an isolated atom: discrete atomic energy level E0.
    • Bring N identical atoms to form a crystal. Due to overlap, the atomic level splits into N closely spaced levels spanning a bandwidth W ≈ 4|t| in simple 1D TB (t = hopping integral). As N → large, levels form a quasi-continuum = a band.
    • Repeat for other atomic orbitals to get multiple bands separated by gaps when symmetry forbids mixing or when energy ranges do not overlap.
  2. NFE derivation of a gap at the zone boundary (qualitative math)
    • Start from free-electron states |k⟩ and |k − G⟩ that are degenerate when k is at the boundary (k = G/2).
    • Include a single Fourier component of the periodic potential V_G.
    • Write the 2×2 secular equation: |E_k^0 − E V_G; V_G* E_{k−G}^0 − E| = 0. At degeneracy E_k^0 = E_{k−G}^0, eigenvalues split by ≈ 2|V_G|, forming an energy gap Δ ≈ 2|V_G| at k = G/2.
    • Conclude: gaps open at Bragg planes, flattening E–k near boundaries and creating forbidden regions.
  3. Kronig–Penney (1D, outline)
    • Consider piecewise-constant periodic potential of period a.
    • Solve Schrödinger equation in well and barrier regions, get sinusoidal/exponential solutions with wavevectors α and β.
    • Apply boundary conditions of continuity of ψ and dψ/dx at interfaces in one cell; apply Bloch condition ψ(x + a) = e^{ika} ψ(x).
    • Eliminate coefficients to obtain the dispersion relation (as stated above). Identify allowed energies from |cos(ka)| ≤ 1.
  4. Effective mass relation
    • Expand E(k) near an extremum k0: E(k) ≈ E0 + (1/2)(d^2E/dk^2)_{k0} (k − k0)^2.
    • Match with parabolic form E = E0 + ħ^2 (k − k0)^2 / (2 m*), yielding 1/m* = (1/ħ^2)(d^2E/dk^2)_{k0}.

Classification from band picture (at 0 K)

  • Metal (conductor): Fermi level lies within a band (partially filled) or valence and conduction bands overlap → many states at E_F, easy acceleration → high conductivity.
  • Insulator: Valence band completely filled and separated by a large gap Eg (typically > ~3 eV) from an empty conduction band → negligible carriers at 0 K.
  • Semiconductor: Similar to insulator but with a small gap (few eV). At finite temperature or with doping, carriers are thermally/chemically excited into the conduction band. Full carrier statistics are in “Semiconductors and the Fermi level.”

Optical transitions and direct/indirect gap (brief)

  • Direct gap: Conduction band minimum (CBM) and valence band maximum (VBM) occur at the same k; optical transitions conserve k and are strong (useful for LEDs/lasers).
  • Indirect gap: CBM and VBM at different k; phonon involvement needed for momentum conservation → weaker optical absorption/emission near the edge.

Formulas

ψ_k(r) = u_k(r) · e^{i k·r} — Bloch function; k: wavevector (m⁻¹); r: position (m); u_k(r): lattice-periodic part; holds for periodic potentials.

E_n(k) = E_n(k + G) — Band energy periodicity in reciprocal space; G: reciprocal lattice vector (m⁻¹); valid in crystals.

E_free(k) = ħ² k² / (2 m_e) — Free-electron dispersion; ħ: J·s; k: m⁻¹; m_e: kg; applies without periodic potential.

cos(k a) = cos(α a) + (P / (α a)) sin(α a) — Kronig–Penney (δ-barrier limit); a: m; α = √(2 m E)/ħ (m⁻¹); P: dimensionless barrier strength; allowed bands for |cos(ka)| ≤ 1.

Δ ≈ 2 |V_G| — Energy gap at a zone boundary in NFE model; V_G: Fourier component of periodic potential (J); applies near Bragg planes.

1 / m* = (1 / ħ²) · d²E/dk² — Effective mass (scalar, 1D principal direction); m*: kg; E in J; k: m⁻¹; valid near band extrema where E–k is parabolic.

E(k) ≈ E₀ + ħ² (k − k₀)² / (2 m*) — Parabolic approximation near an extremum; E₀: J; k₀: m⁻¹; m*: kg; valid sufficiently close to extrema.

v_g = (1/ħ) · dE/dk — Group velocity; v_g: m·s⁻¹; E: J; k: m⁻¹; holds for wavepackets in a band.

ħ · dk/dt = − q E — Semiclassical equation under electric field; q = +e = 1.602×10⁻¹⁹ C (magnitude); E: V·m⁻¹; k: m⁻¹; for electrons the force is −qE; valid without interband transitions.

g_c(E) = (1 / (2 π²)) · (2 m*/ħ²)^{3/2} · √(E − E_c) — 3D DOS for a parabolic conduction band; g_c: J⁻¹·m⁻³; m*: kg; E and E_c: J; valid for E ≥ E_c.

|G| = 2 π / a — Magnitude of the smallest reciprocal lattice vector in 1D; a: m; defines first BZ edges at k = ±π/a.

Worked examples

Example 1: First Brillouin zone width in 1D and location of gaps Given: 1D lattice constant a = 0.300 nm.

  1. Formula: |G| = 2 π / a. First zone edges at k = ±π/a. Zone width = 2π/a.
  2. Substitute: a = 0.300 nm = 0.300 × 10⁻⁹ m = 3.00 × 10⁻¹⁰ m.
    • π/a = 3.1416 / (3.00 × 10⁻¹⁰) = 1.0472 × 10¹⁰ m⁻¹.
    • 2π/a = 2.0944 × 10¹⁰ m⁻¹.
  3. Result: First BZ extends from k = −1.047 × 10¹⁰ m⁻¹ to +1.047 × 10¹⁰ m⁻¹. Gaps (in NFE) open at k = ±π/a. Final answer: Edges at ±1.047 × 10¹⁰ m⁻¹; zone width 2.094 × 10¹⁰ m⁻¹.

Example 2: Effective mass and group velocity near a band minimum Given: Near k₀ = 0, band is E(k) = E_c + ħ² k² / (2 m*) with m* = 0.20 m_e. For k = 5.00 × 10⁸ m⁻¹, find v_g and the acceleration under E = 1.00 × 10⁵ V·m⁻¹. Constants: m_e = 9.109 × 10⁻³¹ kg; ħ = 1.054 × 10⁻³⁴ J·s; q = 1.602 × 10⁻¹⁹ C.

  1. Group velocity formula: v_g = (1/ħ) dE/dk. For the parabola, dE/dk = ħ² k / m*. Thus v_g = (ħ k)/ m*.
  2. Compute m*: m* = 0.20 m_e = 0.20 × 9.109 × 10⁻³¹ = 1.8218 × 10⁻³¹ kg.
  3. Compute v_g: v_g = (1.054 × 10⁻³⁴ × 5.00 × 10⁸) / (1.8218 × 10⁻³¹) = (5.270 × 10⁻²⁶) / (1.8218 × 10⁻³¹) = 2.893 × 10⁵ m·s⁻¹.
  4. Acceleration a under E using semiclassical dynamics and effective mass: Force on electron is −qE (direction opposite to E). Magnitude of acceleration a = q E / m*.
    • a = (1.602 × 10⁻¹⁹ × 1.00 × 10⁵) / (1.8218 × 10⁻³¹) = (1.602 × 10⁻¹⁴) / (1.8218 × 10⁻³¹) = 8.799 × 10¹⁶ m·s⁻² (directed opposite to E). Final answers: v_g = 2.89 × 10⁵ m·s⁻¹, a = 8.80 × 10¹⁶ m·s⁻² (opposite to E).

Example 3: Classify material from band picture at 0 K Given descriptions of three solids: A) Uppermost filled band overlaps with next band by 0.5 eV. B) A filled valence band is separated from the conduction band by Eg = 1.1 eV (CBM and VBM at same k). C) A filled valence band is separated by Eg = 6 eV from the conduction band. Questions: Identify metal/semiconductor/insulator and note any optical implication.

  1. Rule: Partially filled or overlapping bands → metal; small finite gap → semiconductor; large gap → insulator. Direct gap enables strong optical transitions.
  2. Apply:
    • A: Overlap means partially filled at E_F → Metal (good conductor).
    • B: Small gap 1.1 eV → Semiconductor; direct gap → strong optical transitions near Eg (good for LEDs/lasers if other conditions are met).
    • C: Large gap 6 eV → Insulator; requires high energy photons (UV) for transitions. Final answer: A: Metal; B: Direct-gap semiconductor; C: Insulator.

Common mistakes

  • Treating m* as always positive; near a band maximum, electron m* is negative and the correct picture is holes with positive effective mass and positive charge.
  • Using free-electron mass m_e in formulas near band edges where m* is required.
  • Confusing Fermi energy (0 K concept) with Fermi level at finite temperature; detailed temperature dependence belongs to semiconductor physics.
  • Drawing E–k diagrams without labeling the first Brillouin zone or band edges, losing marks for incomplete diagrams.
  • Unit errors in DOS: forgetting that g(E) is per Joule per cubic metre (J⁻¹·m⁻³), not per eV unless converted.

For your exam

  • Derivations: Outline of Kronig–Penney dispersion relation; NFE gap opening at zone boundary via 2×2 matrix; effective mass from Taylor expansion of E(k). State boundary conditions and Bloch condition clearly.
  • Diagrams: E–k plot over the first BZ showing valence/conduction bands and gaps; reciprocal lattice with first BZ; Kronig–Penney allowed/forbidden regions (|cos(ka)| ≤ 1). Label axes, k-points (±π/a), band edges (Ec, Ev), and Eg.
  • Numericals: First BZ width for a given a; compute group velocity v_g and acceleration using given m* and k; simple DOS evaluation at a specified E (ensure units). Show formula first, substitute with units, keep significant figures, and box the final result.
  • Presentation: Start with assumptions, define symbols and units, keep steps logical, and annotate diagrams. Quote constants you use.

Quick check

  1. What does Bloch’s theorem say about the form of electron wavefunctions in a periodic crystal?
  2. Where do band gaps open in the nearly free electron model, and why?
  3. Write the relation connecting effective mass and the curvature of the E–k curve in 1D. Answers: 1) ψ_k(r) = u_k(r) e^{i k·r} with u_k periodic like the lattice. 2) At Brillouin zone boundaries (Bragg planes) due to Bragg reflection that couples k and k − G, splitting degenerate levels. 3) 1/m* = (1/ħ²) d²E/dk² (near a band extremum).

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?