SUK TY Mechanical syllabus

SUK · Third Year B.Tech. Mechanical Engineering · NEP 2020

Metrology and Quality Control

ME0253 · Semester V · 3 credits · ISE 10 + mid-semester 30 + ESE 60

  1. Unit 1: Linear Measurement and Limits, Fits and Tolerances

    6 hours

    Need for measurement, standards of length, line and end measurement, errors in measurement, slip gauges; limit systems in mass production, IS specifications, unilateral and bilateral tolerances and types of fits.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Measurement standards, errors and uncertainty
    • Linear measuring instruments and gauges
    • Limits, fits and tolerances
  2. Unit 2: Study of Comparators

    8 hours

    Dial indicator, Sigma and Johansson mikrokator, Solex and differential pneumatic comparators; bevel protractor, sine bar, sine centre and clinometers; angle dekkor and autocollimator.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Comparators
    • Angular measurement: sine bar and bevel protractor
  3. Unit 3: Advancements in Metrology and Surface Roughness

    6 hours

    Coordinate measuring machines, lasers in metrology, interferometry; surface roughness terminology, lay, texture and symbols.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Coordinate measuring machines
    • Interferometry and flatness testing
    • Surface texture measurement
  4. Unit 4: Metrology of Screw Threads and Gears

    6 hours

    Errors in screw threads, thread form on the profile projector, thread diameters by the wire method and screw-thread micrometer; gear profile, backlash and tooth thickness.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Screw thread metrology
    • Gear metrology
  5. Unit 5: Quality Control

    6 hours

    Quality, quality control and assurance, the seven QC tools; statistical quality control, the normal curve, X-bar, R, p and c charts; sampling inspection and sampling plans.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Quality concepts and cost of quality
    • Seven quality tools
    • Control charts for variables
    • Control charts for attributes
    • Acceptance sampling and OC curves
  6. Unit 6: AI in Metrology and Quality Control

    6 hours

    Scope of AI: real-time monitoring, predictive maintenance, generative AI for calibration, data analytics and vision systems in metrology and quality control (descriptive).

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Digital quality and Industry 4.0
    • AI in heat exchangers, IC engines and manufacturing

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.