SUK · Third Year B.Tech. Mechanical Engineering · NEP 2020
Fluid Mechanics and Machinery
ME0252 · Semester V · 3 credits · ISE 10 + mid-semester 30 + ESE 60
Unit 1: Fluid Properties and Fluid Statics
7 hoursFluid properties: densities, specific gravity, viscosity, surface tension, capillarity and compressibility; Pascal's law and the hydrostatic law; total pressure and centre of pressure; buoyancy, metacentre and equilibrium of floating bodies.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Properties of fluids
- Viscosity and types of fluids
- Surface tension and capillarity
- Pascal's law and the hydrostatic law
- Forces on submerged plane and curved surfaces
- Buoyancy and stability of floating bodies
Unit 2: Fluid Kinematics and Dynamics
7 hoursEulerian and Lagrangian descriptions, flow visualisation, streamlines, path lines and streak lines; the 3D continuity equation; Euler's equation and its integration to Bernoulli's equation, kinetic energy correction; venturimeter, orifice meter and pitot tube.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Types of flow and flow description
- Continuity equation
- Euler's equation and Bernoulli's theorem
- Venturimeter, orifice meter and pitot tube
Unit 3: Momentum Equation and Flow through Pipes
6 hoursThe momentum equation and its applications, momentum correction factor; friction losses by Darcy–Weisbach and Chezy; minor losses at expansions, contractions, fittings, entrance, exit and obstructions.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Momentum equation and forces on pipe bends
- Major and minor losses and the Moody chart
- Hydraulic gradient and energy lines
Unit 4: Impulse and Reaction Water Turbines
7 hoursEuler's work equation for rotodynamic machines; classification of turbines; the Pelton wheel and its design; reaction turbines: Francis and Kaplan, draft tubes, cavitation, efficiencies, power and discharge.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Classification of turbomachines
- Velocity triangles and work done
- Pelton wheel design
- Francis and Kaplan turbine design
- Draft tubes and turbine characteristics
Unit 5: Centrifugal Pumps
5 hoursWorking, construction and types of centrifugal pumps; heads, multistage pumps, cavitation and NPSH; efficiencies, discharge, head and power.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Centrifugal pumps: heads, efficiencies and minimum starting speed
- Multistage centrifugal pumps
- NPSH and cavitation in pumps
Unit 6: Recent Trends in Fluid Mechanics and Machinery
5 hoursAI in fluid engineering: performance prediction of centrifugal pumps and Pelton, Francis and Kaplan turbines, pump efficiency and turbine blade optimisation.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- AI, machine learning and deep learning
- Linear regression for performance prediction
Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.