Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Fluid Mechanics

Fluid statics, Bernoulli and flow measurement, pipe flow, boundary layers, dimensional analysis.

Interview questions
Notes for Fluid Mechanics are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Fluid Mechanics

  1. Properties of fluids· notes coming
  2. Viscosity and types of fluids· notes coming
  3. Surface tension and capillarity· notes coming
  4. Pascal's law and the hydrostatic law· notes coming
  5. Pressure measurement and manometers· notes coming
  6. Forces on submerged plane and curved surfaces· notes coming
  7. Buoyancy and stability of floating bodies· notes coming
  8. Types of flow and flow description· notes coming
  9. Continuity equation· notes coming
  10. Stream function, velocity potential and flow nets· notes coming
  11. Euler's equation and Bernoulli's theorem· notes coming
  12. Venturimeter, orifice meter and pitot tube· notes coming
  13. Orifices, notches and weirs· notes coming
  14. Laminar flow through pipes· notes coming
  15. Laminar flow between parallel plates and Couette flow· notes coming
  16. Turbulent flow in pipes· notes coming
  17. Major and minor losses and the Moody chart· notes coming
  18. Pipes in series and parallel and equivalent pipe· notes coming
  19. Siphons and power transmission through pipes· notes coming
  20. Boundary layer on a flat plate· notes coming
  21. Boundary layer thicknesses· notes coming
  22. Boundary layer separation and its control· notes coming
  23. Drag and lift· notes coming
  24. Dimensional homogeneity· notes coming
  25. Buckingham's π theorem· notes coming
  26. Dimensionless numbers· notes coming
  27. Similitude and model laws· notes coming
  28. Circulation and vorticity· notes coming
  29. Momentum equation and forces on pipe bends· notes coming
  30. Impact of jets on plates and vanes· notes coming
  31. Pelton wheel design· notes coming
  32. Francis and Kaplan turbine design· notes coming
  33. Draft tubes and turbine characteristics· notes coming
  34. Centrifugal pumps: heads, efficiencies and minimum starting speed· notes coming
  35. Multistage centrifugal pumps· notes coming
  36. Navier-Stokes equation· notes coming
  37. Hydraulic gradient and energy lines· notes coming
  38. NPSH and cavitation in pumps· notes coming
  39. Water hammer· notes coming