SUK · Third Year B.Tech. Mechanical Engineering · NEP 2020
Failure Analysis
ME0254 · Programme Elective I · Semester V · 3 credits · ISE 10 + mid-semester 30 + ESE 60
One of the Programme Elective I options. Programme Elective I, filed under materials and metallurgy: fracture, fatigue, creep and corrosion failures.
Unit 1: Introduction to Failure Analysis
6 hoursScope of failure analysis; types and causes of failure in design, material, manufacturing, service and maintenance; its role in safety, reliability and quality; economic and legal aspects.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Failure analysis: types, causes and investigation of failures
Unit 2: Fracture and Mechanical Failures
7 hoursDuctile fracture and cup-and-cone fracture; brittle cleavage and intergranular fracture, the ductile-to-brittle transition; Griffith theory, stress intensity factor, fracture toughness and modes of fracture.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Ductile and brittle fracture
- Griffith's criterion and DBTT
- Fracture mechanics: stress intensity factor and fracture toughness
Unit 3: Fatigue Failure
7 hoursCyclic loading, high- and low-cycle fatigue, the S–N curve and endurance limit, factors affecting fatigue life, crack initiation and propagation; case studies.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Fatigue and S–N curves
- Finite life and cumulative damage
Unit 4: Creep and High-Temperature Failures
6 hoursCreep mechanism and stages, creep deformation and rupture, stress rupture testing, high-temperature degradation; case studies.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Creep and creep testing
- Superalloys and high-temperature materials
Unit 5: Corrosion and Environment-Assisted Failures
7 hoursCorrosion fundamentals, types and mechanisms; stress corrosion cracking, hydrogen embrittlement and corrosion fatigue; prevention and control.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Corrosion, stress corrosion cracking and hydrogen embrittlement
- Season cracking and stress corrosion of brasses
Unit 6: Artificial Intelligence in Failure Analysis
7 hoursAI and ML concepts; data acquisition and pre-processing for failure analysis; machine learning for failure prediction.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Machine learning project workflow
- Decision trees for fault diagnosis
Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.