SUK TY Electrical syllabus

SUK · Third Year B.Tech. Electrical Engineering · NEP 2020

Electrical Power Transmission and Distribution

EE0351 · Semester V · 3 credits · ISE 10 + mid-semester 30 + ESE 60

  1. Unit 1: Electric Supply System

    7 hours

    A typical AC supply scheme, DC versus AC transmission, advantages of high transmission voltage, elements of a line, economic choice of voltage and requirements of a satisfactory supply.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Structure of a power system
    • Comparison of supply systems
    • Choice of transmission voltage
  2. Unit 2: Mechanical Design of Overhead Lines

    7 hours

    Components of overhead lines, conductor materials and supports; insulators, potential distribution over a string, string efficiency and its improvement; corona and its reduction; sag.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Conductor materials: copper and ACSR
    • Types of overhead line insulators
    • String efficiency
    • Corona and corona loss
    • Sag calculation for overhead lines
  3. Unit 3: Electrical Design of Overhead Lines

    7 hours

    Line constants, resistance and skin effect; inductance of single- and three-phase lines, self and mutual GMD; capacitance of single- and three-phase lines.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Skin and proximity effects
    • Inductance of a single-phase line
    • GMR and GMD
    • Inductance of three-phase lines and transposition
    • Capacitance of a single-phase line
    • Capacitance of three-phase lines
  4. Unit 4: Performance of Transmission Lines

    7 hours

    Classification of lines; short single- and three-phase lines and the effect of power factor; medium lines by end-condenser, nominal-T and nominal-π methods; long lines by the rigorous method; generalised ABCD constants.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Classification of transmission lines
    • Performance of short lines
    • Efficiency and regulation of lines
    • Nominal-T and nominal-pi models
    • Long transmission lines
    • ABCD constants
  5. Unit 5: Distribution Systems

    7 hours

    Classification and requirements of distribution systems, AC distribution, overhead versus underground systems, connection schemes and design; unbalanced three-phase and four-wire star loads.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Classification and requirements of distribution systems
    • AC distribution calculations
    • Unbalanced three-phase four-wire loads
  6. Unit 6: Substation

    7 hours

    Classification of substations, outdoor and indoor, pole-mounted and underground; equipment and symbols; bus-bar arrangements; key diagrams of 66/11 kV and 11 kV/400 V substations.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Substation equipment and their ratings
    • Substation classification and equipment
    • Bus bar arrangements

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.