Electrical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Electrical Engineering (University)

Electrical Installation, Design & Condition Based Maintenance

Distribution economics, substations and earthing, condition monitoring, estimation and costing, testing.

Interview questions
Notes for Electrical Installation, Design & Condition Based Maintenance are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Electrical Installation, Design & Condition Based Maintenance

  1. Comparison of supply systems· notes coming
  2. Primary and secondary distribution· notes coming
  3. Voltage drop in AC distributors· notes coming
  4. Kelvin's law· notes coming
  5. Distribution feeders· notes coming
  6. Substation classification and equipment· notes coming
  7. Bus bar arrangements· notes coming
  8. Equipment and neutral earthing· notes coming
  9. Earth electrodes and earth resistance· notes coming
  10. Step and touch voltages· notes coming
  11. Substation earthing grid design· notes coming
  12. Maintenance strategies· notes coming
  13. Preventive maintenance of transformers and motors· notes coming
  14. Insulation deterioration and polarisation index· notes coming
  15. Condition monitoring of electrical equipment· notes coming
  16. Vibration and motor current signature analysis· notes coming
  17. Hot-line maintenance· notes coming
  18. Principles of estimating and costing· notes coming
  19. Tenders and quotations· notes coming
  20. Cable and conductor sizing· notes coming
  21. Estimating residential and commercial wiring· notes coming
  22. Estimating underground LT service lines· notes coming
  23. CAT ratings of test instruments· notes coming
  24. Insulation resistance testing· notes coming
  25. Polarity and earth continuity tests· notes coming
  26. Earth resistance testing methods· notes coming
  27. Permissible voltage drop for lighting and industrial loads· notes coming
  28. Conductor sizing for overhead lines with ACSR· notes coming
  29. Specifications of wiring accessories· notes coming
  30. Comparative statements and purchase orders· notes coming
  31. Centralised and decentralised purchasing· notes coming
  32. Cables: types, jointing and insulation resistance· notes coming
  33. Line insulators: pin, suspension, strain and stay· notes coming
  34. Wiring systems and external influences· notes coming
  35. Methods of cable installation· notes coming
  36. Current-carrying capacity and grouping of cables· notes coming
  37. Transformer oil testing and reconditioning· notes coming
  38. Condition monitoring of bushings and tap changers· notes coming
  39. Dissolved gas analysis· notes coming
  40. Induction motor fault diagnosis· notes coming
  41. Cable fault location· notes coming
  42. Type, routine and special tests on transformers· notes coming
  43. Troubleshooting induction motors and capacitor banks· notes coming
  44. Ultrasonic and radiographic testing· notes coming
  45. Heat run and high-voltage withstand tests· notes coming
  46. Coincidence, contribution and loss factors· notes coming
  47. Optimal location and rating of distribution substations· notes coming
  48. Power loss calculations in radial feeders· notes coming
  49. Reclosers, sectionalisers and fuses in distribution protection· notes coming
  50. Distribution automation and data acquisition· notes coming
  51. Line drop compensation and voltage regulators· notes coming
  52. Machine foundations, levelling and shaft alignment· notes coming
  53. Distribution feeder loading, K factors and uniformly distributed loads· notes coming
  54. Modelling distribution lines, transformers, regulators and capacitor banks· notes coming
  55. Rooftop solar and bidirectional power flow in distribution· notes coming