SUK · Third Year B.Tech. Civil Engineering · NEP 2020
Open Channel Hydraulics
CE0265 · Programme Elective 03 · Semester VI · 3 credits · ISE 10 + mid-semester 30 + ESE 60
One of the Programme Elective 03 options.
Unit 1: Basic Flow Concepts
6 hoursContinuity, energy and momentum in open channels, correction factors, hydraulic exponents, uniform flow by the section factor and Manning's n; transitions; velocity and sediment measurement and river gauging.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Open channel flow and its classification
- Uniform flow: Chezy's and Manning's formulae
- Velocity measurement in channels
Unit 2: Non-Uniform Flow
6 hoursGVF in prismatic and natural channels; hydraulic jumps in rectangular and other channels, their location and use as energy dissipators; spatially varied flow, side weirs and bottom racks.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Gradually varied flow equation
- Direct step method
- Hydraulic jump in rectangular channels
- Location of hydraulic jump
- Energy dissipators
- Spatially varied flow and side weirs
Unit 3: Flow in Curved and Non-Prismatic Channels
6 hoursSpiral flow, energy loss and superelevation in bends, cross waves; subcritical and supercritical design; standing-wave and Venturi flumes; flow between bridge piers, through culverts and trash racks.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Flow in channel bends and non-prismatic channels
Unit 4: Unsteady Flow
8 hoursGradually varied unsteady flow and flood routing; rapidly varied flow, waves and celerity, positive and negative surges, the dam-break problem; HEC-RAS.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Surges in open channels
- Flood routing and dam-break flow
Unit 5: Dispersion and Mobile-Bed Hydraulics
6 hoursDiffusion and dispersion and tracer discharge measurement; initiation of sediment motion, bed forms and sediment load; erodible channel design and regime theory.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Sediment transport in channels
- Dispersion and tracer discharge measurement
Unit 6: Hydraulic Models
6 hoursFixed-bed distorted and undistorted river models, movable-bed models, model materials, calibration and special-purpose models.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Hydraulic river models
Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.