Civil Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Civil Engineering (University)

Open Channel Hydraulics and Fluid Machinery

Gradually and rapidly varied flow, hydraulic jump, impact of jets, centrifugal pumps, turbines.

Interview questions
Notes for Open Channel Hydraulics and Fluid Machinery are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Open Channel Hydraulics and Fluid Machinery

  1. Gradually varied flow equation· notes coming
  2. Classification of water surface profiles· notes coming
  3. Direct step method· notes coming
  4. Hydraulic jump in rectangular channels· notes coming
  5. Location of hydraulic jump· notes coming
  6. Energy dissipators· notes coming
  7. Impulse–momentum equation· notes coming
  8. Impact of jet on flat plates· notes coming
  9. Impact of jet on curved vanes· notes coming
  10. Hydroelectric power plant layout· notes coming
  11. Centrifugal pump: construction and working· notes coming
  12. Heads, work done and efficiencies· notes coming
  13. NPSH and cavitation in pumps· notes coming
  14. Pump characteristics and multistage pumps· notes coming
  15. Pelton wheel· notes coming
  16. Francis and Kaplan turbines· notes coming
  17. Draft tubes and cavitation· notes coming
  18. Turbine selection and surge tanks· notes coming
  19. Open channel flow and its classification· notes coming
  20. Notches and weirs· notes coming
  21. Velocity measurement in channels· notes coming
  22. Uniform flow: Chezy's and Manning's formulae· notes coming
  23. Most economical channel sections· notes coming
  24. Specific energy and critical depth· notes coming
  25. Surges in open channels· notes coming
  26. Reciprocating pumps· notes coming
  27. Jet, air-lift and submersible pumps· notes coming
  28. Velocity and pressure distribution in channels· notes coming
  29. Design of open channels· notes coming
  30. Darcy–Weisbach friction factor and equivalent roughness· notes coming
  31. Specific force in channels· notes coming
  32. Sediment transport in channels· notes coming
  33. Spatially varied flow and side weirs· notes coming
  34. Flow in channel bends and non-prismatic channels· notes coming
  35. Flood routing and dam-break flow· notes coming
  36. Dispersion and tracer discharge measurement· notes coming
  37. Hydraulic river models· notes coming