SUK · Third Year B.Tech. Civil Engineering · NEP 2020
Concrete Technology
CE0262 · Semester VI · 3 credits · ISE 10 + mid-semester 30 + ESE 60
Unit 1: Ingredients of Concrete
8 hoursCement manufacture, composition, grades, hydration and types, and its tests; classification and tests of coarse and fine aggregates; alkali-aggregate reaction, bulking of sand, artificial and recycled aggregate; quality of water.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Cement: manufacture, types and hydration
- Tests on cement: fineness, setting time and soundness
- Aggregates and their properties
- Aggregate tests: crushing, impact and abrasion values
- Bulking of sand and crushed sand
- Quality of water for concrete
Unit 2: Fresh Concrete
6 hoursWorkability and its tests, segregation and bleeding; batching, mixing, transporting, compacting and curing concrete.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Workability and its tests
- Segregation and bleeding
- Batching, mixing, placing and curing
Unit 3: Admixtures
6 hoursPlasticisers, superplasticisers, retarders and air-entraining agents to IS 9103; fly ash, silica fume, GGBS, rice husk ash and metakaolin.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Admixtures and fibres
- Mineral admixtures: fly ash, silica fume and GGBS
Unit 4: Concrete Mix Design
8 hoursObjectives and methods of mix design, quality control, statistical methods and acceptance criteria; mix design by ACI 211.1, IS 10262 and IS 456; fly ash concrete mixes.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Principles of mix design
- IS 10262 mix design method
- Quality control and acceptance criteria
- ACI and DoE methods of mix design
Unit 5: Hardened Concrete
6 hoursStrength and the w/c and gel/space ratios, gain of strength and maturity; compressive, flexural and tensile tests, cube versus cylinder; elastic constants, creep and shrinkage; rebound hammer and ultrasonic pulse velocity.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Strength of hardened concrete
- Maturity of concrete
- Cube, cylinder and split tensile strength tests
- Creep and shrinkage of concrete
- Non-destructive testing of concrete
Unit 6: Special Concretes and Durability
6 hoursLightweight, polymer-modified, fibre-reinforced, high-performance, pumpable, roller-compacted and self-compacting concrete; permeability and durability, chemical, sulphate, seawater, acid and chloride attack, carbonation.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- High-performance and self-compacting concrete
- Fibre-reinforced concrete
- Lightweight, pervious and high-density concrete
- Durability: sulphate attack and alkali–silica reaction
- Carbonation and chloride ingress
Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.