Civil Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Civil Engineering (University)

Concrete Technology

Cement and aggregates, fresh and hardened concrete, IS 10262 mix design, durability, special concretes.

Interview questions
Notes for Concrete Technology are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Concrete Technology

  1. Cement: manufacture, types and hydration· notes coming
  2. Aggregates and their properties· notes coming
  3. Admixtures and fibres· notes coming
  4. Workability and its tests· notes coming
  5. Segregation and bleeding· notes coming
  6. Strength of hardened concrete· notes coming
  7. Non-destructive testing of concrete· notes coming
  8. Principles of mix design· notes coming
  9. IS 10262 mix design method· notes coming
  10. Batching, mixing, placing and curing· notes coming
  11. Durability: sulphate attack and alkali–silica reaction· notes coming
  12. Corrosion of reinforcement· notes coming
  13. Sustainable concrete and life-cycle analysis· notes coming
  14. High-performance and self-compacting concrete· notes coming
  15. Fibre-reinforced concrete· notes coming
  16. Lightweight, pervious and high-density concrete· notes coming
  17. 3D-printed and smart concrete· notes coming
  18. Classification of building materials· notes coming
  19. Building stones· notes coming
  20. Bricks and blocks· notes coming
  21. Glass and timber· notes coming
  22. Mortars· notes coming
  23. Stone and brick masonry and finishes· notes coming
  24. Damp, water and termite proofing· notes coming
  25. Lime· notes coming
  26. Permeability and the rapid chloride penetration test· notes coming
  27. Ready-mixed concrete· notes coming
  28. Hot-weather, cold-weather and mass concreting· notes coming
  29. Quality of water for concrete· notes coming
  30. Creep and shrinkage of concrete· notes coming
  31. Mineral admixtures: fly ash, silica fume and GGBS· notes coming
  32. Geopolymer concrete and ferrocement· notes coming
  33. Quality control and acceptance criteria· notes coming
  34. Aggregate tests: crushing, impact and abrasion values· notes coming
  35. Tests on cement: fineness, setting time and soundness· notes coming
  36. Bulking of sand and crushed sand· notes coming
  37. Maturity of concrete· notes coming
  38. Cube, cylinder and split tensile strength tests· notes coming
  39. Concrete ingredients and the water–cement ratio· notes coming