SUK SY Civil syllabus

SUK · Second Year B.Tech. Civil Engineering · NEP 2020

Fluid Mechanics

CE0243 · Semester IV · 3 credits · ISE 10 + mid-semester 30 + ESE 60

  1. Unit 1: Fluid Properties and Fluid Statics

    7 hours

    Density, specific weight and gravity, viscosity, compressibility, surface tension, capillarity, vapour pressure and cavitation; Newton's law of viscosity and types of fluid; Pascal's and the hydrostatic laws; total pressure and centre of pressure on plane and curved surfaces; buoyancy, metacentre and stability of floating bodies.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Properties of fluids
    • Viscosity and Newton's law of viscosity
    • Surface tension and capillarity
    • Pressure and its measurement
    • Total pressure and centre of pressure
    • Pressure on curved surfaces
    • Buoyancy and metacentric height
  2. Unit 2: Fluid Kinematics

    5 hours

    Types of flow; streamlines, streaklines, pathlines and stream tubes; velocity and acceleration; stream function and velocity potential; flow nets.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Types of flow and flow lines
    • Velocity and acceleration of fluid particles
    • Velocity potential and stream function
    • Flow nets
  3. Unit 3: Fluid Kinetics

    7 hours

    Forces on fluid in motion; Euler's equation and Bernoulli's theorem, its assumptions and modifications; venturimeters, orifice meters, orifices and emptying tanks; HGL and TEL; mouthpieces and rotameters; the idea of CFD.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Euler's equation and Bernoulli's equation
    • Venturimeter and orifice meter
    • Orifices and mouthpieces
    • Hydraulic gradient and energy lines
    • Pitot tube and rotameter
  4. Unit 4: Flow Through Pipes

    7 hours

    Reynolds' experiment; laminar flow by Hagen-Poiseuille; the Moody chart; major and minor losses and the Darcy-Weisbach equation; equivalent pipes and Dupuit's equation; series, parallel and siphon pipes; two-reservoir problems; water hammer and surge tanks.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Reynolds' experiment
    • Laminar flow: Hagen–Poiseuille equation
    • Turbulent flow and Darcy–Weisbach equation
    • Minor losses in pipes
    • Pipes in series and parallel
    • Siphons, water hammer and power through nozzles
    • Surge tanks and the Moody chart
  5. Unit 5: Uniform Flow in Open Channels

    7 hours

    Types of channel flow and geometric elements; velocity measurement by Pitot tube and current meter; hydraulically efficient rectangular, triangular and trapezoidal sections; specific energy and critical, subcritical and supercritical flow; specific force.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Open channel flow and its classification
    • Uniform flow: Chezy's and Manning's formulae
    • Most economical channel sections
    • Specific energy and critical depth
    • Specific force in channels
  6. Unit 6: Non-Uniform Flow in Open Channels

    6 hours

    Gradually varied flow and classification of channel slopes; GVF and RVF; types and applications of the hydraulic jump.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Gradually varied flow
    • Froude number and the hydraulic jump

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.