SPPU · Third Year Mechanical Engineering · 2024 Pattern
Theory of Machines
PCC302-MEC · Semester V · 3 credits · CCE 30 + end-semester 70
Unit 1: Fundamentals of Mechanism
7 hoursLinks, pairs, chains, constrained motion, mechanisms and machines, degrees of freedom and mobility; inversions of the four-bar, slider-crank and double slider-crank chains; equivalent linkages for higher pairs.
Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)
- Links, pairs and kinematic chains
- Degrees of freedom and Grübler's criterion
- Inversions of the four-bar chain
- Inversions of slider-crank and double slider-crank chains
- Equivalent linkages
Unit 2: Kinematic Analysis of Mechanisms: Analytical Method & Graphical Method
7 hoursAnalytical displacement, velocity and acceleration of the slider crank, vector and complex-algebra methods; relative velocity and acceleration diagrams for mechanisms up to six links, the Coriolis component; instantaneous centres, Kennedy's theorem and the ICR method.
Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)
- Analytical analysis of the slider-crank mechanism
- Velocity analysis by relative velocity
- Acceleration analysis and the Coriolis component
- Instantaneous centres and Kennedy's theorem
Unit 3: Synthesis of Mechanisms
7 hoursType, number and dimensional synthesis, path, function and motion generation, precision positions and Chebyshev spacing, structural and mechanical errors; graphical three-position synthesis by inversion and relative poles; Freudenstein's equation.
Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)
- Kinematic synthesis: tasks and types
- Precision positions and Chebyshev spacing
- Graphical three-position synthesis
- Freudenstein's equation
Unit 4: Kinematics of Gears
8 hoursGear terminology, the law of gearing, involute and cycloidal profiles; path and arc of contact, sliding velocity, interference and minimum teeth for spur gears; helical, spiral, bevel and worm gear geometry; simple, compound and epicyclic gear trains and holding torque.
Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)
- Gear terminology and the law of gearing
- Path and arc of contact and contact ratio
- Interference and minimum number of teeth
- Helical, bevel and worm gears
- Simple and compound gear trains
- Epicyclic gear trains and holding torque
Unit 5: Cams & Followers
8 hoursTypes of cams and followers, standard follower motions, cam profiles for different follower motions, pressure angle, radius of curvature and undercutting, the jump phenomenon of an eccentric cam.
Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)
- Types of cams and followers
- Follower motions: SHM, uniform acceleration and cycloidal
- Drawing cam profiles
- Pressure angle, undercutting and jump
Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.