SPPU TE Mechanical syllabus

SPPU · Third Year Mechanical Engineering · 2024 Pattern

Manufacturing Process-II

PCC304-MEC · Semester V · 3 credits · CCE 30 + end-semester 70

  1. Unit 1: Multipoint cutting tools and Gear Manufacturing

    8 hours

    Nomenclature and selection of milling cutters, drills, reamers and taps; gear milling, standard cutters and indexing; gear hobbing, shaping, shaving and grinding.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Multipoint cutting tools
    • Gear milling and indexing
    • Gear hobbing and gear shaping
    • Gear finishing: shaving and grinding
  2. Unit 2: Polymer and composite Processing

    7 hours

    Thermoplastics and thermosets; compression, transfer, blow and injection moulding; plastic extrusion, pressure and vacuum forming; composites, matrices and fibres; hand and spray lay-up, resin transfer moulding, pultrusion and vacuum impregnation; metal-, ceramic- and polymer-matrix and nano-composites.

    Marks: 14 in the end-semester exam · CCE: Unit test (12 marks, Units 1 & 2)

    • Thermoplastics and thermosetting plastics
    • Moulding processes for plastics
    • Extrusion and thermoforming of plastics
    • Composite materials
    • Composite manufacturing processes
  3. Unit 3: Modern Machining Processes

    7 hours

    Need and classification of modern machining; abrasive jet, water jet and ultrasonic machining; laser and focused ion beam machining; electrochemical and photochemical machining; EDM and wire EDM — principles, parameters and material removal rates.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Classification of modern machining processes
    • Abrasive jet, water jet and ultrasonic machining
    • Laser and focused ion beam machining
    • Electrochemical and photochemical machining
    • EDM and wire EDM
  4. Unit 4: Additive Manufacturing

    7 hours

    Classification of AM processes; SLA and DLP; SLS, DMLS and SLM; FDM; multi-jet modelling, PolyJet and nanoparticle jetting; quality and post-processing: support removal, sanding, acetone treatment and polishing.

    Marks: 14 in the end-semester exam · CCE: Assignments or case study (12 marks, Units 3 & 4)

    • Additive manufacturing and its classification
    • Photopolymerisation: SLA and DLP
    • Powder bed fusion: SLS, DMLS and SLM
    • Material extrusion and jetting processes
    • Post-processing in additive manufacturing
  5. Unit 5: Jig and Fixture Design

    7 hours

    Interchangeability, degrees of freedom and the 3-2-1 location principle, design principles; locating and clamping, drill bushes, template, leaf, box, indexing and angle-plate jigs; turning, grinding, welding, indexing and inspection fixtures.

    Marks: 14 in the end-semester exam · CCE: Seminar, open-book test or quiz (6 marks, Unit 5)

    • The 3-2-1 principle and location
    • Clamping principles and devices
    • Types of jigs and drill bushes
    • Types of fixtures
    • Designing a simple jig or fixture

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.