SPPU SE Mechanical syllabus

SPPU · Second Year Mechanical Engineering · 2024 Pattern (Revised)

Manufacturing Processes-I

PCC-252-MEC · Semester IV · 3 credits · CCE 40 + end-semester 60

  1. Unit 1: Theory of metal cutting

    8 hours

    Subtractive manufacturing, lathe and milling operations; chip formation and chip types, orthogonal and oblique cutting, shear angle and Merchant's theory, cutting forces and power; tool materials and tool signature; tool wear and Taylor's tool life equation.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Lathe and milling operations
    • Chip formation and types of chips
    • Orthogonal and oblique cutting
    • Merchant's theory and cutting forces
    • Cutting tool materials and tool signature
    • Tool wear and Taylor's tool life equation
  2. Unit 2: Metal Casting Technology

    8 hours

    Patterns, materials and allowances, moulding sand and its properties, cores, melting furnaces, gating and pouring, cleaning, casting defects and remedies; die, centrifugal, investment and continuous casting; mould filling time, riser design, directional solidification and solidification time.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Patterns and pattern allowances
    • Moulding sand and cores
    • Gating system and mould filling time
    • Riser design and solidification
    • Casting defects and remedies
    • Special casting processes
  3. Unit 3: Metal Forming Technology

    8 hours

    Stress–strain analysis in forming, bulk deformation and forming defects; rolling and the estimation of rolling force, torque and power; open-, closed- and impression-die forging and forging load; sheet-metal operations, presses, progressive dies, strip layout, clearance, centre of pressure, cutting force and press capacity.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Fundamentals of metal forming
    • Rolling and rolling load
    • Forging and forging load
    • Sheet metal operations and presses
    • Die design: strip layout, clearance and press capacity
  4. Unit 4: Joining Technology

    6 hours

    Soldering and brazing; weld symbols, joints and electrodes, weld defects and inspection; MIG and TIG arc welding, spot and seam resistance welding and heat generation, oxy-acetylene gas welding, friction welding; laser, plasma arc, submerged arc, projection, electron beam and ultrasonic welding.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Soldering, brazing and weld joints
    • Arc welding: MIG and TIG
    • Resistance welding
    • Gas welding and flames
    • Solid-state and modern welding processes
    • Welding defects and inspection
  5. Unit 5: Finishing and Fine finishing processes

    6 hours

    Grinding machines, grinding wheels: types, designation and selection, grit, grade and structure, glazing, loading, dressing and truing; surface-finish measurement; honing, lapping, magnetic abrasive and ultrasonic finishing and abrasive flow machining.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (8 marks, Unit 5)

    • Grinding machines and processes
    • Grinding wheels: designation and selection
    • Honing and lapping
    • Advanced fine finishing processes

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.