SPPU · Second Year Mechanical Engineering · 2024 Pattern (Revised)
Fluid Mechanics
PCC-251-MEC · Semester IV · 3 credits · CCE 40 + end-semester 60
Unit 1: Fundamental Principles
8 hoursFluid properties: density, viscosity and Newton's law, rheology, vapour pressure, surface tension, capillarity, compressibility; Pascal's and the hydrostatic law; piezometers, barometers and manometers; total pressure and centre of pressure on plane and curved surfaces; buoyancy and stability of floating bodies.
Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)
- Properties of fluids
- Viscosity and types of fluids
- Surface tension and capillarity
- Pascal's law and the hydrostatic law
- Pressure measurement and manometers
- Forces on submerged plane and curved surfaces
- Buoyancy and stability of floating bodies
Unit 2: Fluid Kinematics & Dynamics
7 hoursTypes of flow, velocity and acceleration fields, continuity in 1D and 3D, streamlines, pathlines and streaklines, stream and potential functions, flow nets; Euler's equation, Bernoulli's theorem and its modified form, stagnation pressure, HGL and TEL; venturimeter, orifice meter, pitot tube, orifices, notches and weirs.
Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)
- Types of flow and flow description
- Continuity equation
- Stream function, velocity potential and flow nets
- Euler's equation and Bernoulli's theorem
- Venturimeter, orifice meter and pitot tube
- Orifices, notches and weirs
Unit 3: Internal Flow
7 hoursEntrance region, laminar flow through pipes and between fixed parallel plates, Couette flow, turbulent velocity profile; major and minor losses, smooth and rough boundaries, the Moody chart, pipes in series and parallel, equivalent pipe, siphons and power transmission through pipes.
Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)
- Laminar flow through pipes
- Laminar flow between parallel plates and Couette flow
- Turbulent flow in pipes
- Major and minor losses and the Moody chart
- Pipes in series and parallel and equivalent pipe
- Siphons and power transmission through pipes
Unit 4: External Flow
7 hoursBoundary layer on a flat plate: boundary-layer, displacement, momentum and energy thicknesses, separation and its control; drag and lift, types of drag and their coefficients; aerofoils, bluff and streamlined bodies.
Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)
- Boundary layer on a flat plate
- Boundary layer thicknesses
- Boundary layer separation and its control
- Drag and lift
Unit 5: Dimensional Analysis
7 hoursDimensions and dimensional homogeneity, Buckingham's π theorem and repeating variables, dimensionless numbers and their meaning; similitude, model and prototype, model laws and model studies.
Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (8 marks, Unit 5)
- Dimensional homogeneity
- Buckingham's π theorem
- Dimensionless numbers
- Similitude and model laws
Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.