SPPU SE Mechanical syllabus

SPPU · Second Year Mechanical Engineering · 2024 Pattern (Revised)

Engineering Materials & Metallurgy

PCC-203-MEC · Semester III · 3 credits · CCE 40 + end-semester 60

  1. Unit 1: Crystal Structures, Materials Properties and Characterization Techniques

    8 hours

    Crystal structures, Miller indices, imperfections and diffusion; destructive tests (impact, cupping) and NDT (eddy current, ultrasonic, radiography); sample preparation, optical and electron microscopy (SEM, TEM) and X-ray diffraction; sulphur prints, flow lines and the spark test.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Crystal structures and Miller indices
    • Crystal imperfections and diffusion
    • Destructive testing of materials
    • Non-destructive testing
    • Microscopy and X-ray diffraction
    • Macroscopic examination
  2. Unit 2: Phase Diagrams and Iron-Carbon Diagram

    7 hours

    Solid solutions and the Hume-Rothery rules, nucleation and growth in solidification; cooling curves, types of phase diagrams and Gibbs' phase rule; the iron–carbon equilibrium diagram and its invariant reactions.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Solid solutions and Hume-Rothery rules
    • Solidification of metals and alloys
    • Cooling curves and phase diagrams
    • Gibbs' phase rule and the lever rule
    • Iron–carbon equilibrium diagram
  3. Unit 3: Heat Treatments

    7 hours

    TTT and CCT diagrams, retained austenite; annealing (full, process, spheroidise, isothermal, stress relief), normalising, hardening, tempering, austempering, martempering, sub-zero treatment and hardenability; flame and induction hardening, carburising, nitriding and carbonitriding.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • TTT and CCT diagrams
    • Annealing and normalising
    • Hardening, tempering and hardenability
    • Austempering, martempering and sub-zero treatment
    • Surface hardening
  4. Unit 4: Ferrous Materials

    7 hours

    Plain carbon steels; alloy steels and the effect of alloying elements, stainless and tool steels, sensitisation; IS, AISI and SAE designations; white, grey, SG, malleable and alloy cast irons; microstructure–property relationships.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Plain carbon steels
    • Alloy steels and alloying elements
    • Stainless steels and tool steels
    • Designation of steels: IS, AISI and SAE
    • Cast irons
  5. Unit 5: Non-Ferrous Materials

    7 hours

    Copper alloys (brasses and bronzes), aluminium alloys (LM5, duralumin, Y-alloy, Hindalium), nickel alloys (Invar, Inconel), titanium alloys and bearing alloys; age hardening; materials for additive manufacturing.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (8 marks, Unit 5)

    • Copper and its alloys
    • Aluminium alloys and age hardening
    • Nickel, titanium and bearing alloys
    • Materials for additive manufacturing

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.