SPPU · Second Year Mechanical Engineering · 2024 Pattern (Revised)
Applied Thermodynamics
PCC-253-MEC · Semester IV · 3 credits · CCE 40 + end-semester 60
Unit 1: Fundamentals of IC Engines & Fuel, Air and Actual Cycle
7 hoursIC engine classification, components, nomenclature, valve timing and intake and exhaust systems; Otto, Diesel and dual cycles with efficiency and mean effective pressure; fuel–air and actual cycles and their losses.
Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)
- IC engine classification and components
- Valve timing diagrams
- Otto, Diesel and dual cycles
- Fuel–air and actual cycles
Unit 2: Combustion in IC Engines & Fuel Technology
7 hoursFuel injection in SI and CI engines, combustion and knock in SI and CI engines, combustion chambers; biofuels, hydrogen, synthetic fuels, LPG, CNG and ethanol blends, octane and cetane numbers and additives.
Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)
- Fuel injection in SI and CI engines
- Combustion in SI engines and knock
- Combustion in CI engines and knock
- Combustion chambers
- Alternative fuels and fuel ratings
Unit 3: Engine Performance & Testing, Emission Control Technologies
7 hoursIndicated and brake power, fuel and air consumption, friction power by Willan's line and the Morse test, efficiencies, specific fuel consumption, the heat balance sheet and performance curves; supercharging and turbocharging; CO, HC, NOx and PM, EGR, SCR, DPF, three-way catalysts and BS-VI.
Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)
- Engine performance parameters
- Measuring friction power: Willan's line and Morse test
- Heat balance sheet
- Supercharging and turbocharging
- Engine emissions and their control
Unit 4: Engine Systems & Recent Trends in I.C Engine
7 hoursBattery, magneto and electronic (CDI, TCI) ignition; air and liquid cooling; lubricants and lubrication systems; engine management systems and ECUs, HCCI, AI-based maintenance and digital twins.
Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)
- Ignition systems
- Cooling systems
- Lubrication systems
- Engine management systems and recent trends
Unit 5: Positive Displacement Compressor
7 hoursReciprocating compressors with and without clearance, volumetric and isothermal efficiency, free air delivery, indicator diagrams, multistaging, optimum intermediate pressure, inter- and after-coolers, capacity control; Roots blower, vane, screw and scroll compressors.
Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (8 marks, Unit 5)
- Single-stage reciprocating compressor
- Clearance volume and volumetric efficiency
- Multistage compression and intercooling
- Rotary compressors
Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.