Mechanical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Mechanical Engineering (University)

Applied Thermodynamics

IC engine cycles, combustion, engine testing and emissions, engine systems, compressors.

Interview questions
Notes for Applied Thermodynamics are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Applied Thermodynamics

  1. IC engine classification and components· notes coming
  2. Valve timing diagrams· notes coming
  3. Otto, Diesel and dual cycles· notes coming
  4. Fuel–air and actual cycles· notes coming
  5. Fuel injection in SI and CI engines· notes coming
  6. Combustion in SI engines and knock· notes coming
  7. Combustion in CI engines and knock· notes coming
  8. Combustion chambers· notes coming
  9. Alternative fuels and fuel ratings· notes coming
  10. Engine performance parameters· notes coming
  11. Measuring friction power: Willan's line and Morse test· notes coming
  12. Heat balance sheet· notes coming
  13. Supercharging and turbocharging· notes coming
  14. Engine emissions and their control· notes coming
  15. Ignition systems· notes coming
  16. Cooling systems· notes coming
  17. Lubrication systems· notes coming
  18. Engine management systems and recent trends· notes coming
  19. Single-stage reciprocating compressor· notes coming
  20. Clearance volume and volumetric efficiency· notes coming
  21. Multistage compression and intercooling· notes coming
  22. Rotary compressors· notes coming
  23. Biodiesel and transesterification· notes coming
  24. Fuel cells· notes coming
  25. Electric and hybrid vehicle layouts· notes coming
  26. Batteries for electric vehicles· notes coming
  27. Multipoint and direct injection in SI engines· notes coming
  28. Diesel spray behaviour, penetration and air motion· notes coming
  29. Pollutant formation: CO, HC, NOx and particulates· notes coming
  30. Catalytic converters, SCR and particulate traps· notes coming
  31. Emission measurement, norms and driving cycles· notes coming
  32. Multi-fuel engines and HCCI· notes coming
  33. CRDI and variable geometry turbochargers· notes coming
  34. On-board diagnostics and NOx adsorbers· notes coming
  35. Two-stroke and four-stroke engines· notes coming
  36. Simple carburettor and its circuits· notes coming
  37. Wankel and Stirling engines· notes coming
  38. Gas turbine cycles: intercooling, reheating and regeneration· notes coming
  39. Fuel injection pumps, governors and nozzles· notes coming
  40. Open- and closed-cycle gas turbines· notes coming
  41. Window, split and inverter air conditioners· notes coming
  42. Jet propulsion: turbojet, turboprop, ramjet and pulse jet· notes coming
  43. Supercritical and ultra-supercritical steam cycles· notes coming