SPPU SE Civil syllabus

SPPU · Second Year Civil Engineering · 2024 Pattern (Revised)

Concrete Technology

PCC-253-CVL · Semester IV · 3 credits · CCE 40 + end-semester 60

All notes for this subject
  1. Unit 1: Concrete Ingredients

    6 hours

    Cement manufacture, composition, types, hydration and properties; aggregates and recycled aggregates; water quality; admixtures; fibres.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Cement: manufacture, types and hydration
    • Aggregates and their properties
    • Admixtures and fibres
  2. Unit 2: Fresh and Hardened Concrete

    6 hours

    Workability and slump, compaction-factor, Vee-Bee and flow-table tests; setting and bleeding; compressive, tensile and flexural strength and factors affecting strength and durability; microstructure and permeability; rebound hammer, UPV, penetration and pull-out tests.

    Marks: 12 in the end-semester exam · CCE: Unit test (16 marks, Units 1 & 2)

    • Workability and its tests
    • Segregation and bleeding
    • Strength of hardened concrete
    • Non-destructive testing of concrete
  3. Unit 3: Concrete Mix Design

    6 hours

    Nominal and design mixes and their principles; batching, mixing, transport, placing, compaction and curing; the IS 10262 method.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Principles of mix design
    • IS 10262 mix design method
    • Batching, mixing, placing and curing
  4. Unit 4: Durability and Sustainability

    6 hours

    Sulphate attack, chloride ingress and alkali–silica reaction; corrosion of reinforcement and its prevention; permeability and absorption; recycled aggregates, by-products and green cements; life-cycle analysis.

    Marks: 12 in the end-semester exam · CCE: Assignments or case study (16 marks, Units 3 & 4)

    • Durability: sulphate attack and alkali–silica reaction
    • Corrosion of reinforcement
    • Sustainable concrete and life-cycle analysis
  5. Unit 5: Special Concretes

    6 hours

    High-performance, self-compacting and fibre-reinforced concrete; lightweight, pervious and high-density concrete; 3D-printed, self-healing, sensor-embedded, nano and green concrete.

    Marks: 12 in the end-semester exam · CCE: Seminar, open-book test or quiz (8 marks, Unit 5)

    • High-performance and self-compacting concrete
    • Fibre-reinforced concrete
    • Lightweight, pervious and high-density concrete
    • 3D-printed and smart concrete

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.