SPPU BE Mechanical syllabus

SPPU · Final Year Mechanical Engineering · 2019 Course

Dynamics of Machinery

402042 · Semester VII · 4 credits · In-semester 30 + end-semester 70

  1. Unit 1: Balancing

    Static and dynamic balancing; rotating masses in one and several planes; primary and secondary balancing of reciprocating masses; single-cylinder, in-line, radial and V engines by direct and reverse cranks; balancing machines.

    Marks: 15 in the in-semester exam

    • Static and dynamic balancing
    • Balancing rotating masses in several planes
    • Primary and secondary balancing
    • Balancing multi-cylinder engines
    • Direct and reverse crank method
  2. Unit 2: Gyroscope

    Precession and gyroscopic couple; effects on aeroplanes and on ships steering, pitching and rolling; stability of four-wheelers and two-wheelers on curves; a disc inclined on a rotating shaft.

    Marks: 15 in the in-semester exam

    • Gyroscopic couple
    • Gyroscopic effect on aeroplanes and ships
    • Stability of four-wheel and two-wheel vehicles
  3. Unit 3: Single-DOF Free Vibration

    Elements of vibratory systems; modelling bicycles, motorbikes and quarter cars; equivalent stiffness and damping; equations of motion by Newton, D'Alembert and energy methods; natural frequency of longitudinal, transverse and torsional systems; damped free vibration, logarithmic decrement; Coulomb damping.

    Marks: 17–18 in the end-semester exam

    • Modelling vibratory systems
    • Equivalent stiffness and damping
    • Equations of motion: Newton and energy methods
    • Undamped free vibration
    • Damped free vibration and logarithmic decrement
  4. Unit 4: Single-DOF Forced Vibration

    Forced longitudinal and torsional vibration; frequency response; rotating and reciprocating unbalance; base excitation; magnification factor; force and motion transmissibility; quality factor and the half-power bandwidth; critical speed of shafts.

    Marks: 17–18 in the end-semester exam

    • Forced vibration and frequency response
    • Rotating and reciprocating unbalance
    • Base excitation
    • Transmissibility and vibration isolation
    • Critical speed of shafts
  5. Unit 5: Two-DOF Undamped Vibration

    Spring-coupled longitudinal and torsional systems; torsionally equivalent shafts; natural frequencies and mode shapes; eigenvalues and eigenvectors by the matrix method; combined rectilinear and angular motion; geared systems.

    Marks: 17–18 in the end-semester exam

    • Two degree of freedom systems
    • Natural frequencies and mode shapes
    • Matrix method for eigenvalues
    • Torsional vibration of geared systems
  6. Unit 6: Vibration Measurement, Control and Noise

    Accelerometers, impact hammers, shakers and analysers; condition monitoring and spectrum analysis; standards; passive, semi-active and active control; isolators and tuned absorbers; sound, decibels, noise measurement and control.

    Marks: 17–18 in the end-semester exam

    • Vibration measuring instruments
    • Vibration-based condition monitoring
    • Vibration control and dynamic absorbers
    • Noise measurement and control

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.