SPPU BE Mechanical syllabus

SPPU · Final Year Mechanical Engineering · 2019 Course

Design of Heat Transfer Equipment

402044B · Elective III · Semester VII · 3 credits · In-semester 30 + end-semester 70

One of the Elective III options.

  1. Unit 1: Heat Exchanger Fundamentals

    Classification, applications and standards; the design equation; LMTD and its correction factor; effectiveness–NTU; fouling, its causes, types, effects and factors.

    Marks: 15 in the in-semester exam

    • Applications and classification of heat exchangers
    • LMTD and correction factor
    • Effectiveness-NTU method
    • Overall heat transfer coefficient and fouling
  2. Unit 2: Double-pipe Heat Exchangers

    Construction; thermal and hydraulic design of tube and annulus; hairpin exchangers with bare and finned tubes; pressure drop; rating and sizing; tube- and shell-side correlations; enhancement.

    Marks: 15 in the in-semester exam

    • Double-pipe and air-cooled heat exchangers
    • Hairpin heat exchangers
    • Heat transfer enhancement
  3. Unit 3: Shell-and-tube Heat Exchangers

    Tube layouts and baffles; shell-side coefficients and equivalent diameter by Kern's and Bell–Delaware methods; temperature difference in 1–2 exchangers; shell- and tube-side pressure drop; design.

    Marks: 17–18 in the end-semester exam

    • Shell-and-tube construction and TEMA standards
    • Thermal design of shell-and-tube exchangers
    • Kern's method
    • Bell–Delaware method and pressure drop
  4. Unit 4: Condensers and Evaporators

    Heat exchangers for refrigeration and air conditioning; air-cooled and evaporative condensers; evaporators and their thermal analysis; standards.

    Marks: 17–18 in the end-semester exam

    • Condenser design
    • Evaporator design
  5. Unit 5: Compact Heat Exchangers

    Classification; plate, plate-fin, tube-fin and coiled-tube exchangers with numericals; mini- and microchannel exchangers; thermal analysis.

    Marks: 17–18 in the end-semester exam

    • Plate heat exchangers
    • Compact and finned-tube heat exchangers
    • Microchannel heat exchangers
  6. Unit 6: Direct-contact Heat Exchangers

    Cooling towers, wet-bulb and dew point; classification and fills; heat balance and requirements; counter-flow tower design; number of diffusion units.

    Marks: 17–18 in the end-semester exam

    • Cooling towers

Unit contents are summarised from the official SPPU syllabus . AiCanCode.org is not affiliated with Savitribai Phule Pune University.