Mechanical Engineering (University) is coming soon
We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.
Mechanical Engineering (University)
Design of Heat Transfer Equipment
Shell-and-tube design by Kern and Bell–Delaware, boilers, condensers, cooling towers, heat pipes.
Notes for Design of Heat Transfer Equipment are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.
Coming next in Design of Heat Transfer Equipment
- Applications and classification of heat exchangers· notes coming
- Overall heat transfer coefficient and fouling· notes coming
- Thermal design considerations· notes coming
- Shell-and-tube construction and TEMA standards· notes coming
- Thermal design of shell-and-tube exchangers· notes coming
- Kern's method· notes coming
- Bell–Delaware method and pressure drop· notes coming
- Boiler and furnace design· notes coming
- Heat recovery systems· notes coming
- Condenser design· notes coming
- Cooling towers· notes coming
- Plate heat exchangers· notes coming
- Compact and finned-tube heat exchangers· notes coming
- Double-pipe and air-cooled heat exchangers· notes coming
- Optimisation and CFD in heat exchanger design· notes coming
- Heat pipes· notes coming
- Electronics cooling· notes coming
- Microchannel heat exchangers· notes coming
- LMTD and correction factor· notes coming
- Effectiveness-NTU method· notes coming
- Hairpin heat exchangers· notes coming
- Heat transfer enhancement· notes coming
- Evaporator design· notes coming
- Thermal system design methodology and optimisation· notes coming