SGBAU · Second Year B.E. Mechanical Engineering · NEP 2020
Engineering Thermodynamics
3ME200PC · Semester III · 3 credits · IE 40 + ESE 60
Unit 1: Fundamentals
Systems and control volumes, properties, state and equilibrium, processes and cycles, the zeroth law and temperature scales, and pressure, density and their measurement.
Examined in the 60-mark end-semester paper
- Thermodynamic systems, properties and processes
- Zeroth law and temperature measurement
- Pressure measurement and manometers
Unit 2: Energy, Energy Transfer and Energy Analysis
Forms of energy, heat and work and their mechanisms, the first law and energy balance, flow energy, energy conversion efficiencies and their environmental implications.
Examined in the 60-mark end-semester paper
- Heat and work
- Point and path functions and PdV work
- First law for closed systems and cycles
Unit 3: Pure Substances
Phase-change processes, saturated states, property diagrams and the P-v-T surface, steam and R-134a tables and the Mollier chart; ideal and real gases, the compressibility factor and specific heats of gases, liquids and solids.
Examined in the 60-mark end-semester paper
- Formation of steam and its properties
- Property diagrams of water
- Steam tables and the Mollier chart
- Ideal gas laws and the equation of state
- Real-gas equations of state: virial and Benedict–Webb–Rubin
- Generalised relations for specific heats
Unit 4: First Law for Flow Processes
Conservation of mass and the mass balance for steady flow, flow work, the general energy equation for a control volume, and its application to nozzles, compressors, turbines, throttle valves, mixing chambers and heat exchangers in steady and unsteady flow.
Examined in the 60-mark end-semester paper
- Continuity equation
- Flow work and non-flow work
- Steady-flow energy equation and its applications
Unit 5: Second Law
Thermal reservoirs, reversible and irreversible processes, heat engines, refrigerators and heat pumps, the Kelvin–Planck and Clausius statements, the thermodynamic temperature scale, and the Carnot cycle and principles.
Examined in the 60-mark end-semester paper
- Heat engines, refrigerators and heat pumps
- Kelvin–Planck and Clausius statements
- Equivalence of the statements and PMM-II
- Reversible and irreversible processes
- Carnot cycle and Carnot's theorem
Unit 6: Entropy
The Clausius inequality, entropy and the increase-of-entropy principle, entropy change of pure substances and ideal gases, isentropic efficiencies, entropy balance, availability and second-law efficiency, and simple gas and vapour power cycles.
Examined in the 60-mark end-semester paper
- Clausius inequality and entropy
- Principle of increase of entropy
- Entropy change of an ideal gas
- Available energy and availability
- Exergy destruction and second-law efficiency
- Carnot and Rankine cycles
- Otto, Diesel and dual cycles
Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).