SGBAU SY Mechanical syllabus

SGBAU · Second Year B.E. Mechanical Engineering · NEP 2020

Energy Conversion-I

4ME211PC · Semester IV · 2 credits · IE 40 + ESE 60

A 2-credit course, but the scheme examines it like the 3-credit ones: 40 internal marks and a 60-mark, 3-hour paper.

  1. Unit 1: Steam Power Plants and Boilers

    7 hours

    The steam power plant, its layout and site selection; fire-tube, water-tube, packaged and high-pressure (Loeffler, Benson, Lamont) boilers, mountings and accessories, fluidised-bed combustion and cogeneration.

    Examined in the 60-mark end-semester paper

    • Layout of a thermal power plant
    • Fire-tube and water-tube boilers
    • High-pressure boilers: Loeffler, Benson and Lamont
    • Boiler mountings and accessories
    • Pulverised coal and fluidised bed boilers
    • Combined cycle and cogeneration
  2. Unit 2: Draught and Boiler Performance

    7 hours

    Types of draught, chimney height and diameter, maximum discharge and chimney efficiency; boiler rating, equivalent evaporation, efficiency and heat balance.

    Examined in the 60-mark end-semester paper

    • Boiler draught and chimney height
    • Ash handling and draught systems
    • Boiler performance: equivalent evaporation and efficiency
  3. Unit 3: Condensers, Cooling Towers and Steam Nozzles

    7 hours

    Types of condensers, cooling water, Dalton's law, condenser and vacuum efficiency and air leakage; wet cooling towers; flow through nozzles and diffusers, critical pressure ratio, choking and nozzle efficiency.

    Examined in the 60-mark end-semester paper

    • Steam condensers
    • Condenser and vacuum efficiency
    • Air leakage and air pumps
    • Cooling towers for power plants
    • Steam nozzles: maximum discharge and supersaturated flow
  4. Unit 4: Steam Turbines

    7 hours

    Impulse and reaction, axial and radial, back-pressure and condensing turbines; compounding, reheat, regeneration and bleeding; velocity diagrams, work, axial thrust and efficiency; governing.

    Examined in the 60-mark end-semester paper

    • Impulse steam turbines
    • Reaction steam turbines and degree of reaction
    • Compounding of steam turbines
    • Improving Rankine cycle performance
    • Losses and governing of steam turbines
  5. Unit 5: Nuclear Power

    7 hours

    Fission, fusion, chain reaction, conversion and breeding; the reactor, steam generator, moderator and control rods; BWR, PWR, CANDU and liquid-metal-cooled reactors.

    Examined in the 60-mark end-semester paper

    • Nuclear fission, fusion and breeding
    • Nuclear reactors
  6. Unit 6: Renewable Energy

    7 hours

    Wind, solar, fuel cell, biogas, geothermal, OTEC and tidal power and the applications of non-conventional energy.

    Examined in the 60-mark end-semester paper

    • Solar thermal and photovoltaic plants
    • Wind power plants
    • Geothermal energy
    • Tidal, wave and OTEC
    • Fuel cells

Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).