SGBAU · Second Year B.E. Civil Engineering · NEP 2020
Concrete Technology
3CE201PC · Semester III · 3 credits · IE 40 + ESE 60
Unit 1: Introduction to Concrete
7 hoursConcrete as a construction material, its ingredients — cement, aggregates, water and admixtures — the water–cement ratio, properties of concrete and the factors affecting them and mix proportions.
Examined in the 60-mark end-semester paper
- Concrete ingredients and the water–cement ratio
- Strength of hardened concrete
Unit 2: Materials for Concrete
8 hoursTypes of cement, hydration and tests on cement; classification, properties and tests of aggregates; quality of water; types, functions and standards of admixtures.
Examined in the 60-mark end-semester paper
- Cement: manufacture, types and hydration
- Tests on cement: fineness, setting time and soundness
- Aggregates and their properties
- Aggregate tests: crushing, impact and abrasion values
- Quality of water for concrete
- Admixtures and fibres
Unit 3: Nominal and Design Mixes
8 hoursNominal and design mixes and the factors that govern them, mix design to IS 10262:2019 and adjustments for materials and environment; compressive, tensile and flexural strength, curing, shrinkage and creep.
Examined in the 60-mark end-semester paper
- Principles of mix design
- IS 10262 mix design method
- Cube, cylinder and split tensile strength tests
- Batching, mixing, placing and curing
- Creep and shrinkage of concrete
Unit 4: Fresh and Hardened Concrete
8 hoursWorkability, segregation and bleeding, factors affecting workability and its measurement, and durability against freezing and thawing, chemical attack and abrasion.
Examined in the 60-mark end-semester paper
- Workability and its tests
- Segregation and bleeding
- Hot-weather, cold-weather and mass concreting
- Durability: sulphate attack and alkali–silica reaction
Unit 5: Special Concretes
7 hoursHigh-performance, lightweight and high-strength concrete, and an introduction to self-compacting and fibre-reinforced concrete.
Examined in the 60-mark end-semester paper
- High-performance and self-compacting concrete
- Lightweight, pervious and high-density concrete
- Fibre-reinforced concrete
Unit 6: Quality Control in Concrete
7 hoursTesting of cubes, cylinders and beams, acceptance criteria and standards, and protecting, strengthening and repairing concrete structures.
Examined in the 60-mark end-semester paper
- Quality control and acceptance criteria
- Non-destructive testing of concrete
- Repair materials and methods
Unit contents are summarised from the official SGBAU syllabus . AiCanCode.org is not affiliated with Sant Gadge Baba Amravati University (SGBAU).