RTMNU TY Mechanical syllabus

RTMNU · Third Year B.Tech Mechanical Engineering · NEP 2020

Mechatronics

BME5T17D · Elective I · Semester V · 3 credits · College 30 + university 70

One of the Elective I options.

  1. Unit 1: Introduction to Mechatronics and Sensors

    8 hours

    Scope and elements of mechatronics, the design process, measurement and control systems and feedback; proximity, IR, light, flow, level, position, strain, piezoelectric, thermal and other sensors; examples such as autopilots, ABS, engine management and washing machines.

    Examined in the 70-mark end-semester paper

    • Mechatronic systems and their elements
    • Open- and closed-loop systems and block diagrams
    • Displacement, position and proximity sensors
    • Velocity, acceleration and force sensors
    • Pressure, temperature and level sensors
    • Examples of mechatronic systems
  2. Unit 2: Actuating Systems

    8 hours

    Switches, relays and solenoids, DC servomotors, stepper and induction motors, speed control, four-quadrant servo drives and PWM; pneumatic and hydraulic systems, process control valves, cylinder sequencing and cascade control, rotary actuators and circuit symbols.

    Examined in the 70-mark end-semester paper

    • Opto-isolators, protection devices and relays
    • DC motors and servomotors in mechatronics
    • Stepper motors
    • AC and linear motors
    • Pneumatic systems, valves and FRL units
    • Sequencing pneumatic cylinders: cascade and shift register
  3. Unit 3: Interfacing, Drives, DAQ and SCADA

    8 hours

    Microprocessor I/O, buffers, handshaking, polling and interrupts, parallel and serial communication and analogue interfacing; DC, variable-frequency and stepper drives; data acquisition, data loggers and SCADA.

    Examined in the 70-mark end-semester paper

    • Parallel and serial interfacing, handshaking and interrupts
    • Motor drives: DC, variable-frequency and stepper drivers
    • Displays, data loggers and data acquisition
    • SCADA and RFID
  4. Unit 4: Digital Logic and Microprocessors

    8 hours

    Number systems, logic gates, Boolean algebra, Karnaugh maps and sequential logic; 8-, 16- and 32-bit microprocessors and the 8085; analogue-to-digital and digital-to-analogue conversion and an introduction to DSP.

    Examined in the 70-mark end-semester paper

    • Digital logic, logic gates and Boolean algebra
    • 8085 microprocessor architecture and instructions
    • ADCs, DACs and interfacing
  5. Unit 5: Programmable Logic Controllers

    8 hours

    PLC structure and operation, I/O processing, programming languages and ladder diagrams, timers, counters, internal relays, master and jump control, shift registers, data handling and analogue I/O, selecting a PLC, and applications such as pneumatic pistons, conveyors and process tanks.

    Examined in the 70-mark end-semester paper

    • Programmable logic controllers
    • Ladder logic and function block programming
    • PLC timers, counters and internal relays

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).