RTMNU TY Mechanical syllabus

RTMNU · Third Year B.Tech Mechanical Engineering · NEP 2020

Material Science & Engineering

BME5T17C · Elective I · Semester V · 3 credits · College 30 + university 70

One of the Elective I options.

  1. Unit 1: Materials, Structure and Testing

    8 hours

    Classification and properties of materials, crystalline structure and microscopic examination, alloys and solid solutions, the phase rule and lever rule, engineering and true stress–strain curves, impact tests and an introduction to non-destructive testing.

    Examined in the 70-mark end-semester paper

    • Classification of engineering materials
    • Crystal structures and Miller indices
    • Microscopy and X-ray diffraction
    • Solid solutions and Hume-Rothery rules
    • Gibbs' phase rule and the lever rule
    • Mechanical properties of materials
    • Destructive testing of materials
    • Non-destructive testing
  2. Unit 2: Equilibrium Diagrams and Steels

    8 hours

    Equilibrium diagrams and invariant reactions, the iron–iron carbide diagram, critical temperatures and the microstructure of slowly cooled steels, structure–property relations, the effect of alloying elements and steel specifications (EN, AISI, ASTM, IS).

    Examined in the 70-mark end-semester paper

    • Isomorphous, eutectic and peritectic systems
    • Iron–carbon equilibrium diagram
    • Hypo- and hyper-eutectoid steels
    • Alloy steels and alloying elements
    • Designation of steels: IS, AISI and SAE
  3. Unit 3: Plain Carbon, Alloy, Tool and Stainless Steels

    8 hours

    Plain carbon steels; alloy steels such as Hadfield, ball-bearing, maraging and spring steels; tool steels and the heat treatment of HSS with secondary hardening; stainless steels and their heat treatment.

    Examined in the 70-mark end-semester paper

    • Plain carbon steels
    • Maraging and ausformed steels
    • Stainless steels and tool steels
    • Heat treatment of high-speed steel and secondary hardening
  4. Unit 4: Heat Treatment

    8 hours

    Annealing, normalising, hardening, quench cracks and hardenability tests, TTT diagrams, austempering, martempering and patenting, retained austenite, tempering, and case and surface hardening by carburising, nitriding, cyaniding, carbonitriding, flame and induction hardening.

    Examined in the 70-mark end-semester paper

    • Annealing and normalising
    • Hardening, tempering and hardenability
    • Hardenability and its tests
    • TTT and CCT diagrams
    • Austempering, martempering and sub-zero treatment
    • Surface hardening
  5. Unit 5: Cast Irons and Non-Ferrous Alloys

    8 hours

    White, grey, nodular, malleable, chilled and alloy cast irons — production, composition, microstructure and applications; brasses, bronzes, aluminium alloys and bearing materials.

    Examined in the 70-mark end-semester paper

    • Cast irons
    • Copper and its alloys
    • Aluminium alloys and age hardening
    • Nickel, titanium and bearing alloys

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).