RTMNU · Third Year B.Tech Electrical Engineering · NEP 2020
Electrical Machine Design
BEL5T16B · Elective I · Semester V · 4 credits · College 30 + university 70
One of the Elective I options. Program Elective I: 4 credits (3 lectures + 1 tutorial). The PDF heads Unit III "Unit I"; the OCR lost Unit IV's hours.
Unit 1: Materials Used in Electrical Machines
7 hoursClassification of insulating materials by permissible temperature rise and the properties of transformer oil; standard specifications, continuous maximum rating and short-time rating of machines; heating and cooling characteristics.
Examined in the 70-mark end-semester paper
- Electrical engineering materials and space factor
- Temperature rise and rating of machines
- Heating and cooling time constants
Unit 2: Design of Single- and Three-Phase Core-Type Transformers
10 hoursClassification of transformers by construction and service; the output equation and overall dimensions of single- and three-phase core-type transformers; stepped cores; choice of flux density and current density; design for minimum cost, weight and losses.
Examined in the 70-mark end-semester paper
- Transformer construction and specifications
- Output equation of a transformer
- Design of the core and frame
- Design optimisation methods
Unit 3: Performance Characteristics of Transformers
9 hoursTypes of transformer winding; per-unit leakage reactance and regulation of core-type transformers; no-load current; an introduction to cooling methods.
Examined in the 70-mark end-semester paper
- Design of transformer windings
- Leakage reactance of transformers
- No-load current and losses of transformers
- Cooling and tank design
Unit 4: Stator Core and Rotor Design of Three-Phase Induction Motors
The output equation of the three-phase induction motor, choice of specific magnetic and electric loadings, number and type of stator slots and the stator's overall dimensions; rotor types, air-gap length, rotor slots and the overall dimensions of the squirrel-cage rotor.
Examined in the 70-mark end-semester paper
- Output equation of an induction motor
- Specific electric and magnetic loadings
- Main dimensions and stator design
- Air gap length
- Cage rotor design
Unit 5: Design of Three-Phase Alternators
9 hoursClassification of alternators; peripheral and runaway speeds; pitch and distribution factors; the effect of the short-circuit ratio on performance; overall dimensions of the three-phase alternator.
Examined in the 70-mark end-semester paper
- Main dimensions of synchronous machines
- EMF equation and winding factors
- Short-circuit ratio and air gap of synchronous machines
- Salient pole machine design
- Turbo-alternator design
Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).