Electrical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Electrical Engineering (University)

Computer Aided Design of Electrical Machines

Transformer design, three-phase induction motor design, PMSM and switched reluctance machines.

Interview questions
Notes for Computer Aided Design of Electrical Machines are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Computer Aided Design of Electrical Machines

  1. Transformer construction and specifications· notes coming
  2. Heating and cooling of transformers· notes coming
  3. Output equation of a transformer· notes coming
  4. Design of the core and frame· notes coming
  5. Design of transformer windings· notes coming
  6. Leakage reactance of transformers· notes coming
  7. Short-circuit forces· notes coming
  8. Cooling and tank design· notes coming
  9. Computer-aided transformer design· notes coming
  10. Specific electric and magnetic loadings· notes coming
  11. Output equation of an induction motor· notes coming
  12. Main dimensions and stator design· notes coming
  13. Air gap length· notes coming
  14. Cage rotor design· notes coming
  15. Wound rotor design· notes coming
  16. Leakage reactance of induction motors· notes coming
  17. Magnetising current calculation· notes coming
  18. Brushless motor fundamentals· notes coming
  19. PMSM design· notes coming
  20. Switched reluctance motor design· notes coming
  21. Electrical engineering materials and space factor· notes coming
  22. Temperature rise and rating of machines· notes coming
  23. Main dimensions of synchronous machines· notes coming
  24. Salient pole machine design· notes coming
  25. Short-circuit ratio and air gap of synchronous machines· notes coming
  26. Field and damper winding design· notes coming
  27. Turbo-alternator design· notes coming
  28. Sizing EV induction motors· notes coming
  29. Design optimisation methods· notes coming
  30. FEM-based machine design· notes coming
  31. Principles, factors and limitations of machine design· notes coming
  32. Computer-aided machine design approaches· notes coming
  33. No-load current and losses of transformers· notes coming
  34. Design of heating coils and chokes· notes coming
  35. Design of starters and lifting magnets· notes coming
  36. Lap and wave windings for DC machines· notes coming
  37. Three-phase AC windings· notes coming
  38. Ampere-turn calculation for magnetic circuits· notes coming
  39. Unbalanced magnetic pull· notes coming
  40. Heating and cooling time constants· notes coming
  41. Methods of cooling and ventilation· notes coming
  42. Design of DC machines: output equation and main dimensions· notes coming