RTMNU TY Electrical syllabus

RTMNU · Third Year B.Tech Electrical Engineering · NEP 2020

Electrical Distribution Systems

BEL6T21C · Elective III · Semester VI · 4 credits · College 30 + university 70

One of the Elective III options. Program Elective III: 4 credits (3 lectures + 1 tutorial).

  1. Unit 1: Introduction to Electrical Distribution Systems

    9 hours

    Components of the distribution system, substation and busbar layouts and feeder configurations; the relationship between load factor and loss factor; classification of loads and how loads change the load curve.

    Examined in the 70-mark end-semester paper

    • Primary and secondary distribution
    • Distribution feeders
    • Bus bar arrangements
    • Load curves and load factors
  2. Unit 2: System Analysis

    9 hours

    Transformer and feeder loading; K factors and their applications; uniformly distributed loads and geometric load configurations; series impedance of distribution lines and feeders; load flow analysis.

    Examined in the 70-mark end-semester paper

    • Distribution feeder loading, K factors and uniformly distributed loads
    • AC distribution calculations
    • Power loss calculations in radial feeders
  3. Unit 3: System Modelling

    9 hours

    Models of overhead lines, feeders and cables, single- and three-phase distribution transformers, voltage regulators, loads and capacitor banks.

    Examined in the 70-mark end-semester paper

    • Modelling distribution lines, transformers, regulators and capacitor banks
    • Load models: voltage and frequency dependence
    • Line drop compensation and voltage regulators
  4. Unit 4: Power Factor Improvement and Voltage Control

    9 hours

    Causes and effects of low power factor and the most economical power factor; static capacitors, synchronous condensers and phase advancers; voltage control by excitation, shunt capacitors and reactors, tap-changing and booster transformers and synchronous condensers.

    Examined in the 70-mark end-semester paper

    • Electricity billing and power factor improvement
    • Power factor correction with capacitors
    • Methods of voltage control
    • Tap-changing transformers and ULTC control
    • Synchronous condensers and static VAR systems
  5. Unit 5: Recent Trends in Distribution Systems

    9 hours

    Rooftop solar with storage and bidirectional power flow; microgrids as local, controllable and resilient networks; virtual power plants; load shedding and management.

    Examined in the 70-mark end-semester paper

    • Rooftop solar and bidirectional power flow in distribution
    • Microgrid architecture
    • Transactive energy, blockchain and virtual power plants
    • Smart cities and active distribution networks

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).