RTMNU · Third Year B.Tech Electrical Engineering · NEP 2020
Electric Drives & Control
BEL6T20B · Elective II · Semester VI · 3 credits · College 30 + university 70
One of the Elective II options. The PDF prints no hours for Unit II.
Unit 1: Fundamentals of Electrical Drives
9 hoursClassification, advantages and disadvantages of electric drives; motors used and parts of a drive; the status of AC and DC drives; types of load torque; transmission; energy conservation in drives; drives common in industry.
Examined in the 70-mark end-semester paper
- Electric drive components
- Load torque and steady-state stability
- Drives for industrial applications
- Energy conservation in motors and drives
Unit 2: Characteristics of Electrical Drives
Speed-torque characteristics of common drive motors when starting, running, braking and under speed control; selection of motors; load equalisation and flywheel calculations.
Examined in the 70-mark end-semester paper
- Dynamics of electric drives and torque equations
- Matching motors to mechanical loads
- Load equalisation
- Equivalent drive parameters and moment of inertia
Unit 3: Electric Vehicles and Traction Drives
9 hoursThe EV block diagram, components and classes, motors, speed control, controllers and battery charging; systems of traction and railway services; speed-time curves; traction motor control, series-parallel control, and starting and braking of traction motors.
Examined in the 70-mark end-semester paper
- Components of an electric vehicle
- Speed-time curves and train movement
- Traction motor control: series-parallel and multiple unit control
- Traction and crane drives
Unit 4: AC and DC Contactors
9 hoursLock-out contactors, magnetic structure, operation, arc interruption and contactor ratings; HV contactors; control circuits for automatic starting and braking of DC motors and three-phase induction motor drives.
Examined in the 70-mark end-semester paper
- Contactors: construction, arc interruption and ratings
- Contactor-relay logic and control panel wiring
- Control and pilot devices for motors
Unit 5: PLC and Digital Control
9 hoursThe PLC's block diagram, programming, applications and advantages in electric drives; digital control of drives, its block diagram and comparison with other methods.
Examined in the 70-mark end-semester paper
- Motor control with PLCs
- Digital control of electric drives
Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).