Electrical Engineering (University) is coming soon
We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.
Electrical Engineering (University)
Electrical System Design, Management and Auditing
Design of power distribution systems, cables and auxiliary systems, energy monitoring and targeting, energy audit, energy-efficient technologies.
Notes for Electrical System Design, Management and Auditing are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.
Coming next in Electrical System Design, Management and Auditing
- Types of electrical projects· notes coming
- Electrical drawings and single-line diagrams· notes coming
- Tendering and estimation· notes coming
- Selection of distribution systems· notes coming
- Earthing design· notes coming
- Load estimation: load and diversity factors· notes coming
- Transformer selection and sizing· notes coming
- HT and LT switchgear selection· notes coming
- Protection coordination and discrimination· notes coming
- Cable selection and sizing· notes coming
- Bus bar design· notes coming
- UPS, DG sets and batteries· notes coming
- Preliminary interior lighting design· notes coming
- Energy monitoring and targeting· notes coming
- CUSUM technique· notes coming
- Electricity billing· notes coming
- Maximum demand control· notes coming
- Power factor improvement and capacitor placement· notes coming
- Energy Conservation Act and ECBC· notes coming
- Types of energy audit· notes coming
- Energy audit instruments· notes coming
- Benchmarking and audit reporting· notes coming
- Energy performance of motors, drives and lighting· notes coming
- Energy-efficient motors and transformers· notes coming
- VFDs and soft starters· notes coming
- Smart lighting and BLDC fans· notes coming
- Building management systems· notes coming
- Estimating material for house wiring· notes coming
- Conductor sizing for internal domestic wiring· notes coming
- Permissible voltage drop for lighting and industrial loads· notes coming
- Types of insulated wires· notes coming
- Wire joints and terminations· notes coming
- Switches, sockets and distribution fuse boards· notes coming
- Miniature circuit breakers· notes coming
- Cable construction and installation conditions· notes coming
- Types of substations and their equipment· notes coming
- Outdoor substation single-line diagram and estimate· notes coming
- Fuses and protective devices in installations· notes coming
- Bus bar chambers and mounting of CTs and PTs· notes coming
- Types of lamps for buildings· notes coming
- Procedure of wiring planning· notes coming
- Computer-aided electrical design for buildings· notes coming
- Residential electrical design criteria· notes coming
- Simple light, fan and alarm circuits· notes coming
- Single and three-phase residential installations· notes coming
- Industrial, playground and commercial lighting design· notes coming
- Indoor floor-mounted substation design· notes coming
- Electrical installations for commercial buildings and small industries· notes coming
- Motor starting and control circuits· notes coming
- Contactor-relay logic and control panel wiring· notes coming
- Testing and commissioning of industrial installations· notes coming
- IE Rules for electrical installations· notes coming