RTMNU SY Mechanical syllabus

RTMNU · Second Year B.Tech Mechanical Engineering · NEP 2020

Kinematics of Machines

BME3T10 · Semester III · 3 credits · College 30 + university 70

  1. Unit 1: Introduction

    8 hours

    Machines and mechanisms, kinematic links, pairs and chains, inversions, degrees of freedom by Grübler's and Kutzbach's criteria, classes of the four-bar chain, and mechanisms such as the Geneva wheel, pawl and ratchet, straight-line mechanisms and the pantograph.

    Examined in the 70-mark end-semester paper

    • Links, pairs and kinematic chains
    • Degrees of freedom and Grübler's criterion
    • Inversions of the four-bar chain
    • Inversions of slider-crank and double slider-crank chains
    • Straight-line, Geneva and steering mechanisms
  2. Unit 2: Kinematic Analysis

    8 hours

    Velocity and acceleration of simple mechanisms by vector (graphical) methods, the Coriolis component of acceleration, and velocity analysis by instantaneous centres and Kennedy's theorem.

    Examined in the 70-mark end-semester paper

    • Velocity analysis by relative velocity
    • Graphical acceleration analysis
    • Acceleration analysis and the Coriolis component
    • Instantaneous centres and Kennedy's theorem
  3. Unit 3: Kinematic Synthesis

    8 hours

    Graphical and analytical synthesis of mechanisms, restricted to crank-rocker and slider-crank mechanisms.

    Examined in the 70-mark end-semester paper

    • Kinematic synthesis: tasks and types
    • Graphical three-position synthesis
    • Precision positions and Chebyshev spacing
    • Freudenstein's equation
  4. Unit 4: Cams and Followers

    8 hours

    Types of cams and followers, follower motions with their velocity and acceleration diagrams, construction of cam profiles, and an introduction to cams with specified contours.

    Examined in the 70-mark end-semester paper

    • Types of cams and followers
    • Follower motions: SHM, uniform acceleration and cycloidal
    • Displacement, velocity and acceleration diagrams of followers
    • Drawing cam profiles
    • Circular-arc and tangent cams
  5. Unit 5: Gears and Gear Trains

    8 hours

    Spur gear terminology, the law of gearing, involute and cycloidal profiles, contact ratio, interference and the minimum number of teeth; helical, spiral, worm and bevel gears with their force analysis and efficiency; gear trains.

    Examined in the 70-mark end-semester paper

    • Gear terminology and the law of gearing
    • Path and arc of contact and contact ratio
    • Interference and minimum number of teeth
    • Helical, bevel and worm gears
    • Simple and compound gear trains
    • Epicyclic gear trains and holding torque

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).