RTMNU SY Mechanical syllabus

RTMNU · Second Year B.Tech Mechanical Engineering · NEP 2020

Fluid Mechanics and Hydraulic Machines

BME3T09 · Semester III · 3 credits · College 30 + university 70

  1. Unit 1: Fluid Properties and Fluid Statics

    9 hours

    Density, specific weight and gravity, Newton's law of viscosity, surface tension, capillarity and the types of flow; pressure and its measurement with manometers, the hydrostatic and Pascal's laws, total pressure and centre of pressure on plane surfaces, buoyancy and the stability of floating and submerged bodies.

    Examined in the 70-mark end-semester paper

    • Properties of fluids
    • Viscosity and types of fluids
    • Surface tension and capillarity
    • Types of flow and flow description
    • Pascal's law and the hydrostatic law
    • Pressure measurement and manometers
    • Forces on submerged plane and curved surfaces
    • Buoyancy and stability of floating bodies
  2. Unit 2: Fluid Dynamics

    8 hours

    An introduction to the Navier–Stokes equation, Euler's equation along a streamline and Bernoulli's equation, applied to the pitot tube, venturimeter, orifices and the orifice meter.

    Examined in the 70-mark end-semester paper

    • Navier-Stokes equation
    • Euler's equation and Bernoulli's theorem
    • Venturimeter, orifice meter and pitot tube
    • Orifices, notches and weirs
  3. Unit 3: Flow Through Pipes

    8 hours

    Total energy and hydraulic gradient lines, energy losses and the Darcy–Weisbach equation, minor losses, the Moody diagram, pipes in series and parallel, siphons and power transmission through pipes.

    Examined in the 70-mark end-semester paper

    • Hydraulic gradient and energy lines
    • Major and minor losses and the Moody chart
    • Pipes in series and parallel and equivalent pipe
    • Siphons and power transmission through pipes
  4. Unit 4: Theory of Turbomachines

    9 hours

    Classification of turbomachines and the hydroelectric plant; the Pelton impulse turbine and the Francis, propeller and Kaplan reaction turbines — construction, velocity diagrams, design parameters, performance and governing — with the degree of reaction, draft tubes and cavitation.

    Examined in the 70-mark end-semester paper

    • Classification of turbomachines
    • Hydroelectric power plants
    • Pelton wheel design
    • Francis and Kaplan turbine design
    • Draft tubes and turbine characteristics
    • Draft tubes, governing and cavitation
  5. Unit 5: Hydrodynamic Pumps

    9 hours

    Centrifugal pumps — classification, components, heads, velocity triangles, NPSH, cavitation, installation and performance, and self-priming pumps; reciprocating pumps — components, slip, work done, the indicator diagram, cavitation and air vessels.

    Examined in the 70-mark end-semester paper

    • Components and working of centrifugal pumps
    • Centrifugal pumps: heads, efficiencies and minimum starting speed
    • Velocity triangles of pumps
    • NPSH and cavitation in pumps
    • Reciprocating and rotary positive-displacement pumps

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).