RTMNU Final Mechanical syllabus

RTMNU · Final Year B.Tech Mechanical Engineering · CBCS

Mechatronics

BEME701TA · Elective III · Semester VII · 3 credits · College 30 + university 70

One of the Elective III options.

  1. Unit 1: Sensors, Transducers and Control Systems

    7 hours

    Types and applications of sensors and transducers, the scope and elements of mechatronics and the mechatronics design process; measurement systems, types of control system, the feedback principle and the elements and classes of feedback control, with one mechatronic system studied in detail.

    Examined in the 70-mark end-semester paper

    • Mechatronic systems and their elements
    • Displacement, position and proximity sensors
    • Velocity, acceleration and force sensors
    • Pressure, temperature and level sensors
    • Open- and closed-loop systems and block diagrams
    • Examples of mechatronic systems
  2. Unit 2: Electrical, Pneumatic and Hydraulic Actuating Systems

    7 hours

    Switches, relays and solenoids, DC servomotors, stepper and induction motors with speed control, four-quadrant servo drives, PWM and vector drives; pneumatic and hydraulic systems, directional, pressure, servo, proportional and process control valves, cylinder sequencing and cascade control, rotary actuators and circuit symbols.

    Examined in the 70-mark end-semester paper

    • Opto-isolators, protection devices and relays
    • DC motors and servomotors in mechatronics
    • Stepper motors
    • AC and linear motors
    • Pneumatic systems, valves and FRL units
    • Servo and proportional valves
    • Sequencing pneumatic cylinders: cascade and shift register
    • Fluid power symbols
  3. Unit 3: Microprocessor I/O, Interfacing and Data Acquisition

    7 hours

    Buffers, I/O operations, handshaking, polling and interrupts, parallel and serial communication, the peripheral interface adapter and analogue interfacing with ADCs, DACs and an introduction to DSP; impedance characteristics and matching, interfacing motor drives (DC, VFD, scalar and vector, stepper), and data acquisition, data loggers and SCADA.

    Examined in the 70-mark end-semester paper

    • Parallel and serial interfacing, handshaking and interrupts
    • ADCs, DACs and interfacing
    • Impedance characteristics and impedance matching
    • Motor drives: DC, variable-frequency and stepper drivers
    • Displays, data loggers and data acquisition
    • SCADA and RFID
  4. Unit 4: Digital Logic and the 8085 Microprocessor

    8 hours

    Number systems, logic gates, Boolean algebra, Karnaugh maps and sequential logic; components of microprocessors, binary arithmetic, 8-, 16- and 32-bit processors, and the 8085's pins, architecture and building of microprocessor subsystems.

    Examined in the 70-mark end-semester paper

    • Number systems and binary arithmetic
    • Digital logic, logic gates and Boolean algebra
    • Karnaugh maps
    • 8085 microprocessor architecture and instructions
  5. Unit 5: Programmable Logic Controllers

    7 hours

    PLC structure, operation and I/O processing, programming languages and ladder diagrams, timers, counters, internal relays, master and jump control, shift registers, data handling and analogue I/O, and selecting a PLC; applications such as pneumatic piston, motor, vibrating machine, process tank and conveyor control.

    Examined in the 70-mark end-semester paper

    • Programmable logic controllers
    • Ladder logic and function block programming
    • PLC timers, counters and internal relays
    • PLC master control, jump control, shift registers and data handling
    • PLC control applications: pistons, motors, tanks and conveyors

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).