RTMNU Final Civil syllabus

RTMNU · Final Year B.Tech Civil Engineering · CBCS

Design of Steel Structure

BTCVE701T · Semester VII · 4 credits · College 30 + university 70

4 credits (3 lecture hours and 1 tutorial/activity hour a week); a 4-hour university paper.

  1. Unit 1: Design Philosophy and Structural Fasteners

    8 hours

    Steel as a structural material, rolled sections, plastic analysis (shape factor, plastic hinges, collapse mechanisms) and limit state design to IS 800:2007; lap and butt joints, ordinary and HSFG bolts with their shear, bearing and tensile strength and prying force, and fillet, butt and intermittent welds.

    Examined in the 70-mark end-semester paper

    • Steel structures, sections and IS codes
    • Plastic analysis: hinges and collapse mechanisms
    • Limit state design and load combinations
    • Bolted and welded connections to IS 800:2007
    • HSFG bolts and prying action
    • Welded connections and fillet welds
  2. Unit 2: Design of Axially Loaded Members

    8 hours

    Tension members: yield and rupture of plates, chain and staggered fasteners, block shear, shear lag in angles and lug angles; compression members: local and overall buckling, section classification, imperfections, the Perry–Robertson approach and the design of rolled I, angle and channel sections.

    Examined in the 70-mark end-semester paper

    • Tension members: yielding, rupture and block shear
    • Shear lag and lug angles
    • Design of tension members and connections
    • Classification of cross-sections
    • Buckling and design compressive stress
    • Design of axially loaded columns
    • Design of angle struts
  3. Unit 3: Design of Members Subjected to Bending

    8 hours

    Elastic and plastic behaviour of beams, flexural strength with low and high shear, deflection, web buckling and crippling, laterally supported and unsupported rolled beams, built-up and plated beams; welded plate girders by the simple post-critical method and tension field theory, with stiffeners and curtailment of plates.

    Examined in the 70-mark end-semester paper

    • Design bending strength of beams
    • Laterally restrained beams
    • Laterally unrestrained beams
    • Web buckling, web crippling and deflection
    • Built-up and plated beams
    • Welded plate girder: section design
    • Shear buckling of the web
    • Plate girder stiffeners and connections
  4. Unit 4: Design of Members Subjected to Combined Loading

    8 hours

    Members under axial load with uniaxial or biaxial bending and the design of beam-columns; built-up columns with single and double lacing and battens.

    Examined in the 70-mark end-semester paper

    • Columns under axial load and bending
    • Design of beam-columns
    • Built-up columns: lacing and battening
  5. Unit 5: Design of Column Bases

    4 hours

    Design of slab bases, gusseted bases and moment-resistant bases.

    Examined in the 70-mark end-semester paper

    • Slab base
    • Gusseted base
    • Moment-resisting column base

Unit contents are summarised from the official RTMNU syllabus . AiCanCode.org is not affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU).