Civil Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Civil Engineering (University)

Design of Steel Structures

Limit state design to IS 800: tension and compression members, beams, column bases, plate and gantry girders.

Interview questions
Notes for Design of Steel Structures are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Design of Steel Structures

  1. Steel structures, sections and IS codes· notes coming
  2. Limit state design and load combinations· notes coming
  3. Pre-engineered buildings and cold-formed sections· notes coming
  4. Tension members: yielding, rupture and block shear· notes coming
  5. Design of tension members and connections· notes coming
  6. Buckling and design compressive stress· notes coming
  7. Design of angle struts· notes coming
  8. Design of axially loaded columns· notes coming
  9. Built-up columns: lacing and battening· notes coming
  10. Design bending strength of beams· notes coming
  11. Laterally restrained beams· notes coming
  12. Web buckling, web crippling and deflection· notes coming
  13. Laterally unrestrained beams· notes coming
  14. Design of purlins· notes coming
  15. Columns under axial load and bending· notes coming
  16. Slab base· notes coming
  17. Gusseted base· notes coming
  18. Moment-resisting column base· notes coming
  19. Welded plate girder: section design· notes coming
  20. Plate girder stiffeners and connections· notes coming
  21. Shear buckling of the web· notes coming
  22. Gantry girder design· notes coming
  23. Working stress method and permissible stresses· notes coming
  24. Bolted and riveted connections· notes coming
  25. Welded connections and fillet welds· notes coming
  26. Plastic analysis: hinges and collapse mechanisms· notes coming
  27. Bolted and welded connections to IS 800:2007· notes coming
  28. Eccentric connections· notes coming
  29. Classification of cross-sections· notes coming
  30. Roof trusses: types, components and loads· notes coming
  31. HSFG bolts and prying action· notes coming
  32. Shear lag and lug angles· notes coming
  33. Built-up and plated beams· notes coming
  34. Beam-to-beam connections· notes coming