PAHSU · Third Year B.Tech. Mechanical Engineering · NEP 2020
Internal Combustion Engines
MECHPEC-01B · Programme Elective I · Semester V · 4 credits · ISE 30 + ESE 70
One of the Programme Elective I options.
Unit 1: Fundamentals of IC Engines
8 hoursClassification and terminology; two- and four-stroke engines and firing orders; Otto and Diesel cycles and the deviation of actual cycles; SI versus CI engines; valve and port timing diagrams.
Examined in the 70-mark end-semester paper
- IC engine classification and components
- Two-stroke and four-stroke engines
- Otto, Diesel and dual cycles
- Fuel–air and actual cycles
- Valve timing diagrams
Unit 2: Fuel Systems for SI and CI Engines
8 hoursSI fuel requirements and mixtures, the simple carburettor, air-fuel ratio and carburettor dimensions; MPFI; requirements of CI injection, individual-pump, CRDI and unit-injector systems.
Examined in the 70-mark end-semester paper
- Simple carburettor and its circuits
- Multipoint and direct injection in SI engines
- Fuel injection in SI and CI engines
- Fuel injection pumps, governors and nozzles
Unit 3: Engine Power Boosting Devices
4 hoursPurpose of power boosting; supercharging and turbocharging, their cycles, advantages and limits, and recent developments.
Examined in the 70-mark end-semester paper
- Supercharging and turbocharging
- CRDI and variable geometry turbochargers
Unit 4: Combustion in SI and CI Engines
8 hoursSI combustion stages, flame speed, abnormal combustion and knock, octane number and HUCR, additives; CI combustion stages, delay period and diesel knock, cetane number and additives; abnormal combustion in SI and CI engines compared.
Examined in the 70-mark end-semester paper
- Combustion in SI engines and knock
- Combustion in CI engines and knock
Unit 5: Engine Testing and Performance
8 hoursPerformance-measuring instruments; torque, power, volumetric and mechanical efficiency, BSFC and brake and indicated thermal efficiencies; the heat balance sheet.
Examined in the 70-mark end-semester paper
- Engine performance parameters
- Measuring friction power: Willan's line and Morse test
- Heat balance sheet
Unit 6: Alternative Fuels and Engine Emissions
4 hoursAlternative fuels for SI and CI engines; HC, CO, NOx, smog and particulate emissions and their control; catalytic converters, EGR and Bharat norms.
Examined in the 70-mark end-semester paper
- Alternative fuels and fuel ratings
- Pollutant formation: CO, HC, NOx and particulates
- Catalytic converters, SCR and particulate traps
- Emission measurement, norms and driving cycles
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).