PAHSU · Third Year B.Tech. Mechanical Engineering · NEP 2020
Design of Machine Elements
MECHPCC-08 · Semester V · 4 credits · ISE 30 + ESE 70
Part B of the term work uses a CAE package to analyse components.
Unit 1: Basics of Engineering Design
5 hoursThe design process, types of load and the factor of safety; theories of failure; aesthetic and ergonomic considerations; design for casting, forging and machining; design for manufacture and assembly.
Examined in the 70-mark end-semester paper
- The machine design process
- Material selection and factor of safety
- Theories of failure in design
- Design for manufacture and assembly
Unit 2: Design Against Fluctuating Loads
9 hoursStress concentration, its causes and remedies; fatigue failure, endurance limit and notch sensitivity; Goodman, modified Goodman and Soderberg diagrams; design for finite and infinite life under reversed and fluctuating stresses.
Examined in the 70-mark end-semester paper
- Stress concentration
- Fatigue, S–N curve and endurance limit
- Soderberg, Goodman and Gerber criteria
- Finite life and cumulative damage
Unit 3: Selection of Belts
6 hoursSelection of flat and V-belts from manufacturers' catalogues and the design data book.
Examined in the 70-mark end-semester paper
- Design of flat belt drives
- Selecting V-belts from catalogues
Unit 4: Design of Shafts and Couplings
6 hoursShaft materials; solid and hollow shafts on strength (maximum principal and maximum shear stress theories) and on torsional rigidity; the ASME code; splined shafts; muff and rigid flange couplings.
Examined in the 70-mark end-semester paper
- Design of shafts for strength
- Design of shafts for rigidity and the ASME code
- Design of keys and splines
- Design of flange couplings
Unit 5: Design of Springs
6 hoursTypes and uses of springs, helical-spring terminology, end styles and materials; stress and deflection, springs in series and parallel; introduction to leaf springs.
Examined in the 70-mark end-semester paper
- Design of helical springs
- Leaf springs and nipping
Unit 6: Design of Joints
8 hoursBolted joints: simple analysis and eccentric loads in shear, parallel and perpendicular to the bolt axis (static loading); welded joints: butt and transverse fillet welds, axially loaded unsymmetrical lap joints and eccentrically loaded welds in shear.
Examined in the 70-mark end-semester paper
- Threaded fasteners and bolts of uniform strength
- Eccentrically loaded bolted joints
- Strength of welded joints
- Eccentrically loaded welded joints
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).