PAHSU TY Mechanical syllabus

PAHSU · Third Year B.Tech. Mechanical Engineering · NEP 2020

Automobile Engineering

MECHPEC-02C · Programme Elective II · Semester VI · 4 credits · ISE 30 + ESE 70

One of the Programme Elective II options.

  1. Unit 1: Introduction to Automobiles

    6 hours

    Classification and major components; front-engine rear-drive, front-wheel-drive, rear-engine and all-wheel-drive layouts; specifications; body types, construction and materials; safety devices.

    Examined in the 70-mark end-semester paper

    • Power flow layouts
    • Chassis and body structures
    • Active and passive vehicle safety
  2. Unit 2: Performance of Automobiles

    6 hours

    Air, rolling and gradient resistance; acceleration, gradeability and drawbar pull; tractive effort and weight distribution; power required, gear ratio and rear-axle ratio selection.

    Examined in the 70-mark end-semester paper

    • Tractive effort and vehicle performance
    • Vehicle aerodynamics
  3. Unit 3: Transmission System

    8 hours

    Single-plate, multi-plate, centrifugal and electromagnetic clutches and the fluid flywheel; sliding-, constant- and synchromesh gearboxes, overdrive, automatic transmissions and the torque converter; propeller shaft, universal and slip joints; final drive, differential and rear axles; wheels and tyres.

    Examined in the 70-mark end-semester paper

    • Clutches and fluid flywheel
    • Gearboxes and automatic transmissions
    • Universal and CV joints
    • Propeller shaft design
    • Final drive and differential
    • Rear axle types
    • Wheels and tyres
  4. Unit 4: Steering System

    6 hours

    Steering layout; Ackermann and Davis mechanisms; steering gearboxes; true rolling; camber, castor, kingpin inclination, toe-in and toe-out, wheel alignment, slip angle, understeer and oversteer; power steering.

    Examined in the 70-mark end-semester paper

    • Steering gears and power steering
    • Steering geometry and wheel alignment
    • Straight-line, Geneva and steering mechanisms
  5. Unit 5: Braking System

    6 hours

    Internal expanding and disc brakes; mechanical, hydraulic, air and power brakes; anti-lock braking; braking force, stopping distance and dynamic weight transfer.

    Examined in the 70-mark end-semester paper

    • Hydraulic and air brakes
    • Anti-lock braking systems
    • Brake efficiency and stopping distance
  6. Unit 6: Suspension Systems

    8 hours

    Sprung and unsprung mass; conventional and independent suspension; shock absorbers and springs; Hotchkiss and torque-tube drives; radius rods and stabiliser bars; air suspension.

    Examined in the 70-mark end-semester paper

    • Independent suspension systems
    • Shock absorbers
    • Hotchkiss drive and torque tube drive
    • Active and air suspension

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).