PAHSU TY Electrical syllabus

PAHSU · Third Year B.Tech. Electrical Engineering · NEP 2020

Electrical Machine Design

EEPEC-02B · Programme Elective II · Semester VI · 4 credits · ISE 30 + ESE 70

One of the Programme Elective II options.

  1. Unit 1: Introduction

    4 hours

    Principles, factors, specifications and limitations of design; modern trends in machine design; insulation and classes of insulation.

    Examined in the 70-mark end-semester paper

    • Principles, factors and limitations of machine design
    • Electrical engineering materials and space factor
    • Temperature rise and rating of machines
  2. Unit 2: Design of Transformers

    10 hours

    Types, classification and specifications; output equation; design of core, yoke, window and windings and choice of design constants; tank design with and without cooling tubes.

    Examined in the 70-mark end-semester paper

    • Transformer construction and specifications
    • Output equation of a transformer
    • Design of the core and frame
    • Design of transformer windings
    • Cooling and tank design
  3. Unit 3: Design of DC Machines

    7 hours

    Output equation; factors affecting the size of rotating machines; specific loadings and separation of main dimensions; number of poles, core length and air gap; design of armature and field system.

    Examined in the 70-mark end-semester paper

    • Specific electric and magnetic loadings
    • Design of DC machines: output equation and main dimensions
    • Lap and wave windings for DC machines
  4. Unit 4: Design of Three-Phase Induction Motors I

    5 hours

    Output equation, specific loadings and main dimensions; stator winding, core and slot design and choice of stator slots.

    Examined in the 70-mark end-semester paper

    • Output equation of an induction motor
    • Main dimensions and stator design
  5. Unit 5: Design of Three-Phase Induction Motors II

    6 hours

    Rotor design and choice of rotor slots; rotor bars and end rings; wound rotor turns and conductor area; rotor tooth density and core.

    Examined in the 70-mark end-semester paper

    • Cage rotor design
    • Wound rotor design
  6. Unit 6: Design of Synchronous Machines

    10 hours

    Output equation and specific loadings; main dimensions, air gap and armature design of salient-pole machines; main dimensions, air gap and stator and rotor design of turbo-alternators.

    Examined in the 70-mark end-semester paper

    • Main dimensions of synchronous machines
    • Salient pole machine design
    • Short-circuit ratio and air gap of synchronous machines
    • Turbo-alternator design

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).